Power Jack comes with indicator light.
Electrical Connectors

Power Jack comes with indicator light.

Through-hole, right angle dc jack has LED for applications where it is necessary to show that power is being supplied to device. Jack is UL94V-0 rated, made of black PBT thermoplastic, and rated to 2.5 A at 24 Vdc. Connector is 12.70 mm in height and available with 1.3 mm center pin. LED can be custom made to show either one or 2 colors. Applications include portable devices such as laptop...

Read More »
Crimped Connector suits rotary switch applications.
Electrical Connectors

Crimped Connector suits rotary switch applications.

TL4 Series four-position connector utilizes 11.4 mm contact spacing and pluggable crimp contacts designed to reduce human error during wiring. TL4 Series connector is manufactured of flame resistant PBT material rated to UL 94 V-0 flammability standards and is rated for 10A applications. It is designed for ovens, ranges, and stove production.

Read More »
Plugs and Outlets have durable black nylon housing.
Electrical Connectors

Plugs and Outlets have durable black nylon housing.

BL Series are suitable for OEM applications requiring low-profile devices. Series include 2014CBL 20 A 125/250 V 4-wire connector, 2014PBL plug, 3014CBL 30 A 125/250 V 4-wire connector, 3014PBL plug, and 3014FIBL flanged inlet. All accommodate wide range of cord shapes and sizes, from 10-3SO to 14-ga Teflon®. Options include 15 A and 20 A straight blade, 15 A locking, and 20 A and 30 A NEMA...

Read More »
Tube Connectors suit high-flow applications.
Connectors

Tube Connectors suit high-flow applications.

Barbed tube-to-tube connectors are designed for use with 3/8 and 1/2 in. ID flexible tubing. Tee, Elbow, and Straight Through configurations are available. Components are molded in lot traceable, virgin, medical-grade polycarbonate and have no parting line on critical sealing surfaces.

Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Sponsored

Distillation 101: A Guide to Distillation and Separation Technologies

Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications

Read More »
Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors suit freestanding wall applications.

Aluminum Connectors, used on CornerForms(TM) panel connector system, feature formed channels that nest metal standards. They include Corner Posts and Three Way Posts that accept 3/4 in. predrilled countersunk holes. Connectors come in 96 in. lengths. Additional aluminum profiles include tubes, bullnose profiles, channel moldings, poster frame and display stand components, and 90 and 180 deg posts.

Read More »
Electrical Connectors

Connector carries 1.5 amperes for wire harnessing.

Mini MiII(TM) 1.25 mm pitch connector system is available in wire-to-board and wire-to-wire configurations in 2 to 20 circuits for single row and 10 to 40 circuits for dual row. Single row IDT receptacle has guide slots to facilitate wire placement. Side ribs provide polarization and lock into clip for dual-row configurations. Header options include single or dual row, SMT or through-hole, and...

Read More »
Connectors work in temperatures from -40 to 185 deg F.
Fiber Optic Connectors

Connectors work in temperatures from -40 to 185 deg F.

Hot Melt ST, SC, and FC fiber optic connectors are approved for indoor and outdoor use as single-mode and multimode connectors. They meet EIA/TIA 568B standards for outdoor applications, and incorporate reheatable adhesive technology and physical contact, pre-radiused zirconia ceramic ferrule technology. Insertion loss values are less than 0.2 dB. Single-mode and multimode units are tested to...

Read More »
Snap-On Connectors rated for 500 Vrms, -65 to +165 deg C.
Electrical Connectors

Snap-On Connectors rated for 500 Vrms, -65 to +165 deg C.

Mini-SMB 75 ohm connectors deliver dc to 4 GHz speed for broadband wireless applications. Connectors comply with MIL-STD 348 and meet Mil-c39012 requirements. Series includes straight RSB-200-1-17 and right angle RSB-21-0-1-179, crimp plugs for RG-179/U cable, vertical and right angle PCB plugs and jacks, and straight RSB-220-1-179 and bulkhead RSB-221-1-179 crimp jacks for RG-179-U cable. All...

Read More »
Instrumentation Fittings handle high pressures.
Fittings

Instrumentation Fittings handle high pressures.

MPI(TM) connectors operate at pressures of 6,000 to 15,000 psi, making them suitable for equipment used to operate feed lines, processing lines, and other systems within industrial labs. Four-part fittings can be used on 316 stainless-steel, cold-drawn, 1/8 hard, unannealed tubing or thick-walled, annealed, instrumentation-grade 316 tubing, and are available for tubing ranging from 1/4 to 1 in....

Read More »
Wire-to-Wire Connectors suit underwater applications.
Electrical Connectors

Wire-to-Wire Connectors suit underwater applications.

JWPF Series connectors are designed for moisture and submersion applications. Housing lances allow confirmation of contact lock-in for secure insertion. Plug-to-receptacle interlock housing prevents accidental disconnection. Connectors are offered with 2 to 4 circuits on 2.0 mm pitch, and contacts are rated at 3.0 Amps, 100 V ac/dc. Temperature range is -25 to +85°C, including temperature...

Read More »

All Topics