M12 Connectors meet Cat 6A requirements.
Electrical Connectors

M12 Connectors meet Cat 6A requirements.

Meeting requirements profiles stipulated by Cat 6A, har-speed M12 connectors suit applications with high bandwidths in machine and plant engineering where accelerated and safe data transmission beyond Cat 5 are desired. Products are based on PAS 61076-2-10x, which defines uniform mating face for 8-pole M12 connectors. Mating face performs 2 tasks: shielding in connector area and coding of mating...

Read More »
RJ45 Connector requires no tools for connection.
Electrical Connectors

RJ45 Connector requires no tools for connection.

Featuring future-proof design for 10 Gigabit Ethernet, HARTING RJ Industrial® 10G utilizes insulation displacement terminal technology designed for rigid and flexible conductors with broad range of wire cross-sections. Cables with diameters from 4.5-9 mm are securely fixed in place with cable gland. Field-installable IP20 model is also suitable for multiport RJ45 jacks.

Read More »
HARTING's New SMC (Surface Mount Compatible) Series of DIN 41 612 Product Range
Connectors

HARTING's New SMC (Surface Mount Compatible) Series of DIN 41 612 Product Range

DIN 41 612 SMC connectors The voltage transfer capability of the new SMC (Surface Mount Compatible) series of HARTING's DIN 41 612 product range has now been tripled. These impressive performance gains were achieved due to the use of special plastics featuring higher CTI values. These new plastics comply with the Group II (400 < CTI-value < 600), while the standard plastics are classified as...

Read More »
RJ45 Jacks feature LEDs and protection against mis-mating.
Electrical Connectors

RJ45 Jacks feature LEDs and protection against mis-mating.

Measuring 18.05 x 20.25 x 11.45 mm overall, 12-pin RJ45 Jacks come in halogenated and halogen-free models with above circuit board height of 9.45 mm. Two springs contained within housing provide mis-mating protection, while shielding measures on sides and in upper portion of connector prevent electromagnetic radiation and interference. Operating from -40 to +105°C, jacks feature minimum...

Read More »
Unique Miniature Power Connectors for Wide Range of Uses
Electrical Connectors

Unique Miniature Power Connectors for Wide Range of Uses

GlobTek introduces it's FX9 series of 2-pin and 3-pin minature locking power plugs. Plugs are commonly used in low voltage power distribution applications, commonly as an output cord on a power supply. Plugs are molded onto a choice of round or flat UL approved cable and available in customer specified lengths. Contact GlobTek for it's wide range of low voltage cable options and support for small...

Read More »
PCB Power Connector has rated current of 16 A/contact.
Electrical Connectors

PCB Power Connector has rated current of 16 A/contact.

Suited for board-to-board connection in solar panel industry, PCB power connector has continuous operating voltage of 600 Vac and can withstand temperatures in range of -40Â-ºC to 105ºC. It is built on 5.08 mm pitch. Parts are available as board-to-board connectors with 2, 4, 6 and 8 contacts for surface-mount, through-hole and pin-in-paste technology.

Read More »
Side-Exit Modular Jack has Category 5e rating.
Electrical Connectors

Side-Exit Modular Jack has Category 5e rating.

Supplied with color coding for EIA/TIA 568A and B wiring, wire guard, and solderable shield box, Shielded Side-Exit Jack is suited for installation in tight spaces, where RFI/EMI is problematic, and Category 5e performance is critical. Jack features keystone style front for snap-in to wall plate or panel, and 180° termination to allow cable entry from side.

Read More »
Board-to-Board Connector allows odd mating angles.
Electrical Connectors

Board-to-Board Connector allows odd mating angles.

Hinged PowerStrip(TM) 25 connectors of FMPS/FMPT Series allow 90° or horizontal mating and is rated at 25 A per contact. They are on .200 in. pitch and available with 2, 4, 6, or 8 power pins. Suited for tight real estate and blind mating, connector allows one series to be stocked for vertical and right-angle applications. Optional screw downs and locking clips are also available.

Read More »
Electrical Connectors

Legrand/Pass & Seymour GFCI Receptacles Meet Provisions of Buy American Act

SYRACUSE, N.Y. (Nov. 20, 2009) - Legrand/Pass & Seymour, a leading manufacturer of electrical wiring devices and home systems, now offers a wide variety of NAFTA-compliant ground fault circuit interrupters. In addition to meeting provisions of the Buy American Act, necessary for Federal Stimulus projects, these GFCIs include the same exceptional safety and tamper-resistant features known to the...

Read More »
SFP/MSA Connector comes in single and quad versions.
Electrical Connectors

SFP/MSA Connector comes in single and quad versions.

Designed to mount SFP transceivers, right-angle SMT SFP/SMA Connector consists of bottom plate with 20-pin, surface mount contact unit; high temperature-resistant plastic insulation cover in accordance with UL94 V-0; and cage, which is mounted on PCB using 8 press-fit connections. Maximum contact resistance is 20 mW and minimum insulator resistance is 500 MW. For LED signal indication on front...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers