New Conditioners Products

Signal Conditioner amplifies and filters load cells, strain gages.

Measuring 3.78 x 1.06 x 1.65 in., DIN Rail mount Model 4710 is designed for load cell, strain gage, or single ended analog amplification and filtering. DC powered module contains instrumentation amplifier; 0-10 Vdc filtered output with frequency response of DC to 10 Hz; and 10 V excitation supply capable of driving 350 ohm bridge. Connections are made via screw clamp terminal blocks, and 0-30 mV...

Pin-Paddle Mixer/Unloader aids high-calcium ash conditioning.

Models 4050/6050 condition ash and other abrasive material with water to suppress dust and facilitate transport to trucks and rail cars. While cleaning chains generate contact against ash material, pin-paddles reduce buildup during each cycle stop. Spray nozzles promote water penetration into bed of material for uniform conditioning and can be independently controlled for precise discharge during...

Cooling System offers containment and control in datacenters.

Leveraging hot aisle/cold aisle rack configuration, SmartAisle cooling management solution contains cold aisle to prevent hot and cold air from mixing. Monitoring, control, and communications are provided by Liebert iCOM control system, which provides proper temperature, humidity, and airflow to inlet of servers. This also independently controls variable capacity compressor and fan speed of...

Signal Conditioners provide 3-way signal isolation.

Housed in plastic case measuring 4.3 x 0.89 x 2.9 in., 8940 Series thermocouple to analog 0-10 V signal conditioners are designed for use with 100, 500, and 1,000 W platinum RTDs with temperature range of -50 to 450Ã-

Screen Printing vs. Digital Printing: Five Key Decision Factors

Learn about the key factors for deciding between screen printing and digital printing.

Low ICCT Gates lower power consumption in mobile devices.

Low ICCT gate TinyLogic devices offer up to 99% reduction in quiescent power consumption when input high voltage is less than supply voltage. Packaged in an ultra-compact 6-pin MicroPak(TM) packaging and measuring only 1 x 1.45 mm, units take up minimal board space, making them ideal for space-constrained designs.

Flow Conditioner minimizes flow meter errors.

Designed to mount directly into piping system, Model 3000 features 4 leading tabs and 4 anti-swirl plates that suppress turbulence and swirl to produce fully developed velocity profile within 8 diameters downstream. Unit is available in sizes from Ã-½-120 in. diameter and measures 2 diameters long. Fabricated from PVC, FRP, or 316 SS with or without TeflonÃ-® coating, conditioner is...

Material Master(TM) Bulk Bag Material Conditioner

Since inventing the industries' first hydraulic Bulk Bag Conditioner in 2001, Material Transfer has provided application specific bulk bag conditioning solutions for a wide range of industries. New patent-pending system utilizes hydraulically actuated pivoting conditioning arms and a rotary lift table to safely and efficiently return solidified materials to a free-flowing state. System's pivoting...

Tilt Sensor Signal Conditioner Boards measure 32 mm in size.

Capable of driving one or two electrolytic tilt sensors, 0729-1751, 1752, 1753 Series of tilt sensor signal conditioner boards can be integrated into variety of OEM equipment/systems in production applications. They feature built-in temperature sensor, and can be configured for single axis, dual axis (x and y in same sensor), or 2 single axis modes (x and y with 2 separate sensors). Devices are...

Signal Conditioner monitors and protects machinery.

Utilizing DSP technology, Sentry G3 Turbine Supervisory System features 4 channels that can be independently programmed to provide continuous monitoring and protection across broad spectrum of measurement regimes, including vibration, expansion, temperature, and speed. Integral color LCD display and drive facility provide immediate viewing and access to machines parameters. Each transducer signal...

Air Conditioner suits off highway/over the road vehicles.

Available as cool only or as air conditioner and heater for on/off-road heavy duty equipment, Model 4050 can be mounted on either wall or ceiling. With footprint of 18.5 x 6.5 x 17.25 in. for cool only and 18.5 x 6.5 x 20.5 in. with optional heater, unit has 18,500 BTU cooling and 32,000 BTU heating capability. Ducting options and remote mount controls also allow for installation behind seat.

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.