New Conditioners Products

Air Conditioner is rated NEMA 4/4x.

Panel-Mounted Integrity Series 21 measures 21 x 12 in. and has capacity of 3,000 Btu/hr. Made of 304-2B stainless steel, unit is intended for NEMA 4/4X enclosures, which require wash-down or are subject to outdoor storm conditions and other harsh environments. Available in 115 or 230 Vac, 50 or 60 Hz, UL/CUL-recognized air conditioner uses CFC-free R134a refrigerant. M-Seal Mounting System seals...

Power Conditioner protects inductive loads.

SOLATRON(TM) Plus 3-Phase Power Conditioner protects against common power problems by providing true voltage regulation, surge protection, and noise isolation. Within input voltage range of -25 to +15%, unit produces output voltage of less than Ã-

Digital Signal Conditioner measures only 5.5 x 2.75 x 1.2 in.

Model 4325 Super-Smart Digital Signal Conditioner connects directly to strain-gauge transducer and generates Ã-

Signal Conditioner converts transducers into smart cells.

Integrated into strain gage transducer, CellMite 100 Embedded Digital Signal Conditioner Unit generates Ã-

Everything You Need to Know About E-Textiles

This ebook provides an in-depth overview into everything you need to know about E-Textiles.

Signal Conditioners and Electronics support TEDS Sensors.

Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICPÃ-® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows...

Digital Load Conditioner suits strain-gauge sensors.

Dedicated to load measuring applications using load cells or transducers, MVD 100 board can supply one full-bridge sensor and offers 3 adjustable set points. It provides 1-3 V, 0-10 V, or 4-20 mA analog output plus RS-232 serial output. Setup and calibration of conditioner is performed via 3 pushbuttons inside unit, and all configuration values can be recalled on internal LCD display. IP65...

Air Conditioners offer lead-lag controller option.

Model KLLC100 is optional for air conditioners equipped with 24 V relay and external connection. Suited for applications requiring multiple air conditioners on single cabinet, dual-stage device allows user to control operation based on either temperature or run-time. For fluctuating heat loads, Lead-Lag Controller will bring second air conditioner on-line as heat load increases, and shut it down...

Flow Conditioner eliminates asymmetrical flow profiles.

VOREL(TM) 90Ã-

Heat Pump suits northern climates.

Cold Climate Heat Pump(TM) provides continuous heating down to and below 0Ã-

Signal Conditioner is powered via computer USB port.

Model 485B36 pocket-sized, dual-channel ICPÃ-® sensor signal conditioner offers low-noise performance found in battery-powered signal conditioners. In addition to providing sensor with required constant current supply, unit decouples sensor's bias voltage from measurement signals. Features include BNC jack input connectors, 19.5 Vdc @ 4.5 mA sensor excitation power, and 50 kHz upper frequency...

Paratherm™ HR Heat Transfer Fluid: Higher Temperature Stability Leads to Longer Fluid Life

For the ultimate in heat transfer fluid performance, Paratherm offers HR Heat Transfer Fluid that is engineered specifically for closed loop liquid phase heating. When it comes to characteristics such as thermal stability and fluid degradation, Paratherm HR leads the industry in value and performance. See our video to learn how Paratherm is raising the bar for heat transfer fluids.