New Computers Products

Notebook Computer suits small and medium businesses.

ThinkPadÃ-® R40 is offered with IntelÃ-® Mobile PentiumÃ-® 4 Processor-M at 2.0 GHz with enhanced Intel SpeedStep technology and 512 KB of on-board L2 cache, or fast Intel Mobile CeleronÃ-® processor at 1.8 GHz with 256 KB of on-board cache. It is wireless upgradable and includes two USB 2.0 ports, integrated Intel 10/100 Ethernet, and 56 K V.90 modem. System memory is expandable...

Single Board Computer features 3 PowerPC 750FX processors.

The SCS750 radiation-hardened single board computer features triple modular redundancy and Reed-Solomon error mitigation for memory. Designed specifically for space applications, computer operates at 800 MHz, provides 1800 MIPS, and offers cPCI standard interface, 32 KB L1 cache and 512 KB L2 cache with ECC, 256 Mbytes of SDRAM and 32 Mbytes of FLASH Memory.

cPCI Board supports IPSec/SSL encryption requirements.

Powered by single or dual IBM 750FX PowerPC, XCalibur1000 6U CompactPCI board, supports Broadcom Super E-Commerce Processor model BCM5821 and PICMG 2.16 standards. Unit includes front panel serial and dual Gigabit Ethernet ports and dual PCI-X PMC module sites. Unit auto-senses its slot location and can run in system or non-system mode. Product provides dual SO-DIMM SDRAM sockets, supporting 128...

Flat Panel Computer suits factory automation applications.

Model 3612KPM industrial computer includes CeleronÃ-® 850 MHz CPU, CD-ROM, floppy, and optional touchscreen. Offered with 12.1 in. SVGA flat panel LCD, product has front panel with reprogrammable alphanumeric keypad and integrated industrial NEMA sealed mouse. Unit also includes 256 MB RAM and 20 GB hard drive, with options for IntelÃ-® PentiumÃ-® III 1.0 and 1.26 GHz processors and...

Design & Manufacturing Process of a Coil

Because the design and manufacturing of electromagnets are critical to the successful operation of the application, it's important to spend time defining your requirements before purchasing coils for an application. This eBook will guide you through the process of evaluating the application's constraints, identifying the needed specifications, and collaborating with a manufacturer to develop an appropriate coil solution for the application.

Single Board Computer is based on Pentium M processor.

Model LBC-9116 PICMG 1.0 Rev. 2.2 compliant passive backplane SBC features Intel Pentium M processor at 1.10 to 1.60 GHz with Advanced Power Management including Enhanced Intel SpeedStepÃ-® technology, dynamic frequency/voltage control, 1 MB full L2 cache, and Intel E7501 chipset with power-optimized 400 MHz front side bus. Graphics controller with concurrent, independent CRT and LVDS...

Hand Held Computer features Microsoft-® Windows-® CE.NET OS.

Designed for 1-handed operation, JETToce is equipped with IntelÃ-® XScale(TM) Technology processor and sunlight readable, 192 x 128 pixel, monochrome LCD with optional touch-screen. Unit also comes with 64MB SDRAM and 16 MB built-in Compact Flash, expandable to 2 GB. Interface options include 1 RS-232 serial port and 1 optional second RS-232, RS-422, or RS-485 serial port. Available as line-...

Panel PC meets industrial waterproof standards.

ARP-1617AP Panel PC supports up to 133 MHz Intel Pentium III or Celeron Processor. Along with multiple I/O ports, unit has PS/2 interfaces, dual USB, 3 RS-232 and one RS-232/422/485 port. Unit features 17 in. 1280 x 1024 resolution XGA TFT color display with viewing angle of 80Ã-

CompactPCI-® SBC has dual 2.0 GHz Xeon(TM) processors.

Model PP 220/01x single board computer uses two Low Voltage IntelÃ-® Xeon Processors, where each processor works within 35 W thermal envelope. Xeon processors support 400 MHz front side bus, 512 Kbytes high-speed L2 cache, Netburst(TM) Microarchitecture, and Hyper-Threading Technology. Equipped with Serverworks(TM) Grand Champion(TM) LE System I/O(TM) core logic, board supports PICMGÃ-®...

440GX Processing Boards offer 333 MHz DDR SDRAM memory.

Xpedite(TM)1000 and XChange(TM)1100 offer 333 MHz DDR SDRAM memory coupled with dual Gigabit Ethernet interfaces. Supporting on-chip 133 MHz PCI-X interface, XPedite1000 PrPMC module includes 440GX processor, which delivers 1334 DMIPS processing at 667 MHz and draws 4.5 W of power. XChange1100, with 6U cPCI form factor, offers PICMGÃ-® 2.16 or compact packet switch backplane support,...

Tablet Computer handles outdoor environments.

Model CT60 personal computer has aluminum casing, is sealed against dust and moisture, handles freezing temperatures, and moves from docking station to remote use without powering down. Computer, with Windows XP Tablet PC Edition operating system, contains Mobile Intel Pentium III Processor-M. Compatible with other company computers with Windows-based operating systems, PC comes with 256 or 512...

Custom Fabrication & Machining Services with Over 30 Years of Experience

As a trusted manufacturer to customers across a broad range of industries, Key Gas Components is a premier provider of CNC machining and tube fabrication. Our entire organization is quality driven and customer-centric, with broad-based manufacturing capabilities that can accommodate the most challenging requirements. See our video to learn more.