Quick Change Jaw System combines precision and repeatability.
Hand (Tool) Clamps

Quick Change Jaw System combines precision and repeatability.

Comprised of Master Jaw Set ofÂ- 2 Master Jaws, 4 low head socket cap screws, and 5/32” hex T wrench, system, DoveLock™ Quick-Change Jaw System for 4 and 8 in. Kurt vises and towers enables precise jaw changes in less than 1 min and jaw positioning repeatability of up to ±0.001 in. Machinable jaws can be rotated 180° and machined on both sides for 2...

Read More »
Hand (Tool) Clamps

KNIPEX Tools Hose Clamp Pliers Wins 2014 Pro Tool Innovation Award

Single tool for hose clamps of different sizes makes work easier and provides reliable gripping ARLINGTON HEIGHTS, Ill.Â- – The KNIPEX Tools LP patented, hose clamp pliers won a Pro Tool Innovation Award. KNIPEX (Model #85 51 250A SBA) hose clamp pliers have rotatable, universal tip inserts for reliably gripping spring hose clamps in all positions up to 2 ¾ -inch diameters....

Read More »
Workpiece Clamping System features modular design.
Hand (Tool) Clamps

Workpiece Clamping System features modular design.

Utilizing quick-change method, CAPTIS Clamping System permits conversion from external to internal clamping in less than 1 minute. Collet changes can be made in 15 seconds. Configurations include: power-operated, rotating CAPTIS collet chuck for turning machines; CAPTIS-D with axial tightening for machining bar stock; CATIS-AF with axially fixed collet and optional workpiece stop for delicate...

Read More »
Tooling Changers

SERAPID to Exhibit at Fabtech 2014 in Chicago

STERLING HEIGHTS, Mich. - Serapid, Inc., a leading supplier of die handling technology will be participating in the annual Fabtech Exhibition held this year at Georgia World Congress Center in Atlanta, GA, November 11-13, 2014. Serapid produces quick die change systems and equipment for the metalforming industry. The products Serapid offers include specific die change systems as well as a...

Read More »
Modular Clamp bends to hold parts at any angle.
Hand (Tool) Clamps

Modular Clamp bends to hold parts at any angle.

Fully articulated and adjustable, Third Hand Modular Clamp holds parts at any position for hands-free access while user tack welds, cuts, grinds, sands, or paints. Two smooth ball joints allow user to rotate clamp arm 360° and bend arm to any position. Clamp position is securely locked and unlocked with turn of socket head cap screws. Measuring 1 Â-½ in wide, portable clamp has...

Read More »
Hinged Shaft Collars accelerate pipe and tube changes.
Shaft Collars

Hinged Shaft Collars accelerate pipe and tube changes.

Facilitating open-close operations as well as clamping by hand, Staff-Lok™ Hinged Shaft Collars feature integral hinge with conformal cam lever for clamping and knurled nut for adjusting clamping preset. Design, with mounting flat with countersunk hole and attachment screw, is suited for securely mounting pipe and tube requiring frequent or fast changes. Eliminating need for tools, collars are...

Read More »
Insulating Suspension Clamp comes with preloaded nail.
Hand (Tool) Clamps

Insulating Suspension Clamp comes with preloaded nail.

Available in Â-½, ¾, and 1 in. CTS sizes, Single Shot® is compatible with copper, CPVC, and PEX tubing and offers plumbers various options for facilitated installation. Key-hole closure assists in pre-hanging of pipe; installer can pre-set nail to joist, slide pipe into clamp, and then set nail. Installer may also slide pipe into Single Shot and then...

Read More »
PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators
Cable Clamps

PIRTEK Offers a Whip Check System as a Safety Measure for Equipment Operators

Safety is always the primary concern when operating hydraulic equipment and machinery. If an end fitting becomes disconnected from a high pressure hose the release of energy contained inside can cause serious injury to anyone operating or working on the equipment. The Whip Check System offered by PIRTEK is a retention system designed to restrain the hose from the Whipping Effect" created by the...

Read More »
Safe and Cost Effective Clamping Devices
Hand (Tool) Clamps

Safe and Cost Effective Clamping Devices

The SVP-Mini and SVP-RM from SCHUNK are manually actuated clamping devices that run on factory-defined set pressure, saving time and energy, reducing set-up costs, and eliminating operating errors. They can be fastened vertically or horizontally at a workstation, or used directly on the TRIBOS polygonal toolholders at the machine spindle. SVP-Mini and SVP-RM are the ideal supplement for operators...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers