Ceramic Capacitors are compact and portable.
Type CMT multilayer ceramic chip capacitors are for filtering in telephone line tip and ring applications. Capacitors are available in 7 EIA sizes ranging from 0805 to 2225, in 5 standard voltage ratings ranging from 200 Vdc to 600 Vdc, in X7R or Z5U dielectrics, and with capacitance ratings ranging from 0.001 to 1.2 micro F. Tolerances are +/-5%, +/-10%, and +/-20% for X7R components, and +/-20%...
Read More »
Non-Inductive Capacitor is rated up to 10,000 pF.
Metallized-polypropylene PGWA Series has wrap-and-fill construction with axial-lead terminations. Dissipation ratings are less than 0.04% and IR is better than 30,000 Kohms. Series features pulse rise time of 600 v/microsec and voltages to 15 KVdc. Seven values are supplied in standard decade sizes as well as special values and sizes. Applications include medical equipment, lasers, hi-voltage...
Read More »
Polystyrene Capacitors are still available.
Although polystyrene materials are no longer being fabricated, polystyrene capacitors are still available with operational voltage ratings to 630 V. Available capacities range from 47 pF to 0.1 microfarads and tolerances to one percent and lower. Axial or radial lead terminations are offered.
Read More »Electrolytic Capacitor has extended cathode foil.
Aluminum Type 4CMC capacitor ranges in capacitance up to 420,000 microF at 16 V, 14,000 microF at 200 V and 2,300 microF at 500 V. It has three 0.062 in. diameters, solid copper mounting pins for reverse-proof mounting, and case sizes from 1.375 x 1.75 to 2 x 5.75 in. Type 4CMC replaces large snap-in or screw-terminal capacitors. Unit handles up to 50 amps of ripple current and is suitable for...
Read More »
Seal Stuff In, Seal Stuff Out
One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?
Read More »
Impedance Instrument is traceable to NIST.
Model 1730 LCR Digibridge will measure, display, and output results of any two parameters, including: series or parallel capacitance, ac resistance, inductance, dissipation factor, quality factor, equivalent series resistance, impedance, reactance, and phase angle. It is suitable for fast throughput of component evaluation in high volume production environment. It has 0.1% accuracy, test...
Read More »
Noise Filters suit clock output signal line applications.
KC series distributed constant circuit type noise filters offer capacitance tolerance of ±30%, inductance tolerance of ±15%, and inductance value of 10nH. Rated voltage is 25V with operating temperature range of -40 to 85° C. Filters are available in case size 1206, and are suitable for flow, reflow or iron soldering. KC series 3-terminal capacitor/inductors are designed for use...
Read More »
High Voltage Capacitor handles up to 450 Vdc.
Type AEB aluminum electrolytic capacitor in surface mount package provides up to 5,000 hr load life at 105 deg C. It is available in 7 vertical cylindrical case sizes ranging from 10 x 13.5 to 18 x 21.5 mm. Unit has capacitance range from 2.2 to 100 microF, rated voltage from 160 to 450 Vdc, and operating temperature of -20 to +105 deg C. Ripple current ratings are over 1 amp at 100 kHz....
Read More »
Trimmer Capacitors suit RF circuitry applications.
FILMTRIM(R) plastic dielectric trimmer capacitors offer 4 capacitance ranges from 0.5 to 4.5 pF through 1 to 20 pF. Devices measure 6.8 x 5.4 x 2.6 mm, and use PTFE film. Quality factor (Q) is greater than 1000 when measured at 10 MHz, and operating temperature is -25 degrees to 85 degrees C. Offering moisture resistance, plastic film trimmers are suitable for flow and reflow soldering....
Read More »
Ceramic Capacitors feature high self-resonant frequency.
HFC Series ceramic capacitors are available in sizes 1005, 1410, 1608, 1610 and 1612. Single layer ceramic substrate construction ensures non-polarity, making units suitable for use in AC circuits where polarity may reverse. Termination material is 100% tin, and operating temperature range is -55° to 125° C. Capacitance ranges include 0.10-0.60 pF (size 1005) or 0.10-1.20 pF (sizes...
Read More »
Capacitors are designed for high voltage applications.
MVDR Inductive Capacitors feature capacitance range of 500PF and 1000PF, with voltage range from 10 to 15 kV, and capacitance tolerance at ±10%(K). Self-healing and equipped with tinned copper-clad steel axial leads, MVDR types may be combined in parallel and/or series to achieve various capacitances and voltages. Construction features include internal multi-series connection windings with...
Read More »
Reduce Time to Market, Improve System Uptime with Dedicated Computing Medical Solutions
Embedded computing solutions from Dedicated Computing are designed to meet unique and specific requirements. As the preferred supplier to leading healthcare OEMs, the Dedicated Computing team of expert engineers gets your product out to the market faster while helping your company avoid costly validation and verification steps. Check out our video to learn more.
Read More »
