PFC Capacitors meet IEC and CE compliance standards.
Fixed Capacitors

PFC Capacitors meet IEC and CE compliance standards.

Used in filtering harmonics load in electric power systems, Power Factor Correction Capacitors feature self-healing properties. Designed on fully automatic numerically controlled winding machines for prevention of corona discharge and ionization, units are available in configurations in high harmonic, voltage and KVAR ranges and are bulletproof.

Read More »
VY1 and VY2 Series Ceramic Disc Capacitors are halogen-free and RoHS compliant.
Capacitors

VY1 and VY2 Series Ceramic Disc Capacitors are halogen-free and RoHS compliant.

VY1 and VY2 Series Ceramic Disc Capacitors are suitable for RFI and AC line filtering applications in home automation devices, E-meters and home appliances. Operated in -40°C to +125°C temperature, units offer 1,000 pF to 10,000 pF capacitance with ±20% tolerance. Capacitors are available with vertical kinked leads or straight leads with spacing of 10 or 12.5 mm for the VY1…Y5V model and...

Read More »
PUL-SI Series Aluminum Capacitors are RoHS compliant.
Fixed Capacitors

PUL-SI Series Aluminum Capacitors are RoHS compliant.

Available in case sizes ranging from 22 x 25 mm to 35 x 60 mm, PUL-SI Series Aluminum Capacitors feature a maximum ESR of 150 mΩ at 100 Hz and 2.80 A of ripple current. Offering 130 mΩ to 1950 mΩ of impedance at 10 kHz, units are suitable for smoothing, filtering, and energy storage in pulsed power applications. Operated in -25°C to +105°C temperature range, capacitors are housed in aluminum...

Read More »
Ceramic Capacitors are surface or through-hole mounted.
Capacitors

Ceramic Capacitors are surface or through-hole mounted.

Suitable for 400Hz aircraft, defense and space applications, Ceramic Capacitors come with C48X dielectric material. Offering dissipation factor of less than 5.10-4, unit withstand high dV/dt, up to 10kV/μs. Providing maximum capacitance of 10μF 200V, capacitor material is developed from 200V to 5kV with chip sizes ranging from 1812 to 16080.

Read More »
New Ruggedized Axial-Leaded Aluminum Electrolytic Capacitor Distributed by New Yorker Electronics
Fixed Capacitors

New Ruggedized Axial-Leaded Aluminum Electrolytic Capacitor Distributed by New Yorker Electronics

High-Performance CDE Device Handles Up to 28A RMS Continuous Ripple Current and 20g Vibration; Meets Specs from -40° to +150°C NORTHVALE, NEW JERSEY, USA – New Yorker Electronics has just released the new Cornell Dubilier Electronics (CDE) line of axial-lead aluminum electrolytic capacitors. The new AXLH Series of ruggedized capacitors are designed for applications which require very...

Read More »
AXLH Series Electrolytic Capacitors are rated to 28A RMS ripple current.
Fixed Capacitors

AXLH Series Electrolytic Capacitors are rated to 28A RMS ripple current.

Used in military, aerospace, off-road vehicles, infrastructure system electronic applications, AXLH Series Electrolytic Capacitors are available in nine capacitance values ranging in 470 µF to 4,700 µF with 25 Vdc to 63 Vdc ratings. Offering 13 to 32 mΩ range of maximum ESR at 100 kHz, units are designed in low profile 20 mm diameter and lengths ranging in 26.5 to 42.5 mm. Capacitors feature...

Read More »
Wet Tantalum Capacitor meets MIL-PRF-39006/33 standards.
Capacitors

Wet Tantalum Capacitor meets MIL-PRF-39006/33 standards.

Offering capacitance ranging in 220µF to 680µF and 50V to 100V voltage range, Wet Tantalum Capacitor provides ±10% and ±20% capacitance tolerance and maximum ripple current of 2750 mA. Operated in -55°C to +85°C temperature range, unit's delivers 15μF to 680μF extended capacitance. Available in axial T1, T2, T3 and T4 case sizes and hermetically sealed, capacitor is suitable for...

Read More »
Multilayer Ceramic Capacitors feature two-chip stack design.
Capacitors

Multilayer Ceramic Capacitors feature two-chip stack design.

Used in smoothing circuits, DC/DC converters, power supplies, and noise reduction circuit applications, Multilayer Ceramic Capacitors use lead-frame technology to vertically stack MLCCs in parallel configuration in single package. Available in EIA 1210 and 2220 case sizes, unit’s attached lead-frame mechanically isolates capacitors from circuit board. KPS “L” capacitors are used in defense,...

Read More »
299 PHL-4TSI Capacitors feature insulated cylindrical aluminum case.
Fixed Capacitors

299 PHL-4TSI Capacitors feature insulated cylindrical aluminum case.

Having 105 °C temperature capability and 5000 h long useful life, 299 PHL-4TSI Capacitors offer 470 µF to 2200 µF capacitance range and 2.45 A to 6.77 A ripple currents at 100Hzs frequency, units come in 35 x 50 to 45 x 100 package. Rated to 400 V to 450 V voltage, capacitors provide 60 mΩ to 240 mΩ max ESR and 50 mΩ to 170 mΩ max impedance. Suitable for smoothing, filtering, and energy...

Read More »

All Topics