New Capacitors Products

New Tantalum Capacitors Come in Polymer Hermetically Sealed 75V Extension

Designed to provide the highest capacitance/voltage (CV) ratings in surface mount device (SMD) capacitors with its innovative stacking construction. Offer improved derating conditions and larger capacitance to ensure low failure rate for typical voltage levels, as well as multiple failure rate options. Ideal for use in high voltage power management applications such as buck boost converters,...

Latest DGH Series Super Capacitors are RoHS Compliant

Available in radial, two-pin snap-in, four-pin snap-in, and dual pack configurations with capacitance values up to 600 Farads. Includes 24 different value/voltage combinations, ranging in capacitance from 0.5F (Farad) to 600F, with voltage ratings from 2.7 to 5.5WVDC. Operating temperature range of -40 ºC to 65 ºC at maximum WVDC, or from -40 ºC to 85 ºC at 2.3 volts.

New Ceramic Capacitor Available in Compact Size of 0.4 x 0.2 mm

GRM022R60G105M and GRM022R60J105M are available with a rated voltage of 4 and 6.3 VDC respectively. Approximately 35% reduction in footprint and a 50% reduction in volume ratio is achieved. Used in a wide range of electronic devices including smartphones and wearable devices.

Vishay Intertechnology Now Listed as Approved Source for DLA Drawing 20001 Wet Tantalum Capacitors

New DLA Drawing Provides Space-Level Screening of M39006 / 33 or CLR93 Series of Established Reliability Devices MALVERN, Pa. — July 14, 2020 — Vishay Intertechnology, Inc. (NYSE: VSH) today announced that its tantalum capacitors division is now an approved source for DLA drawing 20001 wet tantalum capacitors. Vishay once again leads the industry, utilizing the over 200 years of experience...

Hemp: An Eco-friendly Substitute for Cotton and Petroleum-based Synthetics

To learn more about hemp's history, composition, performance, and its sustainability and cost, download this white paper now.

Latest ENYCAP Energy Storage Capacitors are RoHS-Compliant and AEC-Q200 Qualified

Available in seven smaller case sizes ranging from 10 mm. by 20 mm. to 12.5 mm. by 40 mm., with capacitance values from 5 F to 22 F. Feature rapid charge and discharge performance, and come in through-hole versions. Offer life up to 2,000 hours at +85 °C to enable maintenance-free operation and greater design flexibility.

New Film Capacitors Constructed with Aluminum Canister Design

C44U-M and C44P-R series support power conversion in energy storage systems, IGBT and wide bandgap semiconductor devices. Supports DC networks and proportionally supplies high current based on circuit needs or load demands. R75H series is designed for harsh conditions due to its THB test capability of up to 85ºC/ 85 R.H and operating temperature up to 125°C.

New 0402 M Multilayer Ceramic Capacitor Measuring 0.4 x 0.2 x 0.2 mm

GRM022R60G105ME01 available with rated voltage of 4 VDC. GRM022R60J105M is provided with rated voltage of 6.3 VDC. Used in various electronic devices with as many as 1,100 being installed in a single smartphone.

New Aluminum Electrolytic Capacitors Deliver Highest-Energy Density

Available in 85 °C THA series with 8.2 mm. thick and 9 mm. for the 105 °C THAS series. Offer 0.38 mm. form-fitting stainless-steel sleeve to prevent swelling at the highest temperatures and include valve to vent hydrogen gas buildups. Come in sealed, laser-welded aluminum cases to eliminate the need for space-wasting end seal gaskets.

New KC-LINK Range with KONNEKT Technology for Operating Temperature Range up to 150 degree C

Provides low effective series inductance (ESL), increasing the operating frequency range and allowing for further miniaturization. Offers a low-loss, low-inductance package capable of handling high ripple currents with no change in capacitance versus DC voltage. Delivers thermal stability and mechanical robustness through increased efficiency by combining multiple capacitors into a single high...

New Automotive-Grade MLCCs Meet AEC-Q200 Standards

Exhibits low levels of equivalent series inductance (ESL) and provide 1 μF capacitance. Utilize thin-layer technology, high-precision lamination and advanced electrode construction. Support -55°C to +125°C operational temperature range and have 2 A current rating.

Material Handling Solutions from Global Leader in Rubber & Urethane Power Transmission

Megadyne's QST polyurethane timing belts take up less space and guarantee a lower noise level than chain and other traditional material handling belts. Check out our video to learn more.