Tantalum Stacked Capacitors conserve space, lower ESR.
Accommodating applications with limited board space and required capacitance values from 9.4-1,980 Â-µF, Tantalum Stacked MnO2 (TSM) Series can be specified with variety performance characteristics by stacking 2, 3, 4, or 6 standard EIA case size discrete components. Assembly of standard EIA case size discrete components in one device promotes volumetric efficiency and surge capability while...
Read More »
Monolithic Ceramic Capacitors withstand mechanical stress.
Designed to meet automotive market requirements by failing-safe against short circuit, GCJ series also accommodates bending, vibration, and thermal conditions experienced in under-hood applications. Soft termination uses conductive resin on outer electrodes to absorb excessive mechanical stress resulting from board flexing or temperature cycles. Supplied in 0603, 0805, 1206, and 1210 packages,...
Read More »Zytronic's ZYBRID® Touch Sensors Chosen for BSH Flagship Induction Cooktop
PCT(TM) shows its touch sensing capabilities within the home environment Touch sensor specialist Zytronic has been working closely with domestic appliance leader Bosch und Siemens HausgerÃ-¤te GmbH (BSH) in the development of its latest full surface induction cooktop (the recently launched CX 480) for its premium Gaggenau brand product portfolio. The flagship ceramic hob utilises Zytronic's...
Read More »SMT Solid Tantalum Chip Capacitors feature internal fuses.
Offered in C/D/E molded case sizes with RoHS-compliant tin (standard) or Sn/Pb (optional) terminations, T86 Series consists of SMT Hi-Rel COTS TANTAMOUNT® solid tantalum chip capacitors. Each offers Weibull grading and surge-current test options per MIL-PRF-55365, low-ESR option down to 0.25 ohm at 25°C and 100 kHz, and built-in fuses for short circuit protection. Ripple current...
Read More »
Corrosive/Ultrapure Fluid Heat Exchanger Coils - Choosing the Right Strategy
Check out this white paper to learn which heat exchanger types are the best for high temperature performance in chemically aggressive applications.
Read More »
Ceramic Capacitors minimize flicker in LED lighting.
Incorporated in LED lighting circuits immediately following bridge rectification stage, GR3 and RDE Series provide DC smoothing and acoustic noise reduction. GR3 Series, for reflow soldering use, provides capacitance from 10-1,000 nF for 250 Vdc range, 560 nF for 450 Vdc, and 270 nF for 630 Vdc. For radial leaded insertion production, RDE Series features capacitances of 10 nF to 2.2 Â-µF for...
Read More »
Stacked SMPS Capacitors are built to be RoHS compliant.
Utilizing base metal electrode (BME) technology and vertically stacked construction, TurboCap(TM) Series offers CV values, current-carrying capacity, and ESR/ESL characteristics designed to optimize high-frequency performance. These switch mode power supply (SMPS) capacitors, tolerant to vibration and board flexure, come in X7R dielectric and feature voltage range of 50-100 V with capacitance...
Read More »
Switch Mode Power Supply Capacitors are RoHS-compliant.
Utilizing Base Metal Electrode technology and vertically stacked construction, TurboCap(TM) Series features voltage range of 50-100 V with capacitance values up to 220 Â-µF. Units are assembled using lead frame technology, which places ceramic up off board and minimizes cracking issues as well as susceptibility to shock and vibrations. Available in X7R dielectric, capacitors are suited for...
Read More »
Tantalum Polymer Capacitors offer high CV rating, low profile.
Intended for small power modules and handheld devices, TCN Series use undertab design. Products provide 150 Â-µF/6.3 V rating in T and L case sizes, measuring 3.5 x 2.8 mm, with respective profiles of 1.2 and 1.0 mm. RoHS-compliant series contains no halogens and is also suitable for continuous operation with just 20% voltage derating due to reduced ignition failure mode and surge current...
Read More »
Coin Cell Supercapacitors provide memory backup for circuits.
With 0.15-8 Farads capacity at voltages up to 5.5 WVDC, DC Series can supply sufficient power to provide on-board memory backup for preventing loss of data during power interruption. There are 3 case configurations available for horizontal, vertical, and center-lead mounting, and sizes can be as small as small as 6.8 x 4.6 mm. Operating from -40 to +85°C and 90-95% RH, series also offers...
Read More »Power Film Capacitors suit power inverter applications.
Offering voltage ratings to 1,300 Vdc, DC link power film resistors utilize segmented, self-healing metallized polypropylene, internally fused using T-design pattern, for 100,000+ hr life expectancy. Characteristics include 1-4.3 mW typ ESR, 50-80 nH ESL typ, ripple currents up to 70 A RMS from 10-100 kHz, and 160-680 Â-µF capacitance. Tested to environmental specifications of MIL-STD-202,...
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
