Capacitance Meters

Capacitance Meters

True RMS Clamp Meters feature built-in voltage detector.

Featuring 1.5 in. jaw opening to accommodate conductors up to 750 MCM, AC Model MA620 and AC/DC Model MA640 are 600 A clamp meters with non-contact voltage detector, digital multimeter capabilities, and illuminated dual display with 4-digit readout and bargraph. CAT III-rated units offer user-selectable auto- or manual-ranging as well as various measurement functions such as current, voltage,...

Read More »
Capacitance Meters

Handheld Meters assess electronic, process control devices.

Used on bench or in field, U1701A capacitance meter and U1731A/U1732A LCR (inductance, capacitance, resistance) meters let engineers perform one-touch measurements, test tolerance, and record values. Two-in-one functionality of U1401A calibrator/meter lets engineers characterize process-control devices while on-the-go. Suited for validation, troubleshooting, or maintenance, it offers simultaneous...

Read More »
Capacitance Meters

Capacitance Meter offers 0.07% basic accuracy.

Providing small to large capacitance measurement solution for ceramic capacitors in electronics manufacturing and system integration, Model E4981A offers 120 Hz, 1 kHz, and 1 MHz measurements in single box with measurement speed of 2 msec at 1 MHz. It features PC connectivity via LAN, USB, and GPIB, and intuitive user interface with large display. Unit is SCPI-command compatible with other...

Read More »
LCR Meter can measure impedance parameter with 0.1% accuracy.
Capacitance Meters

LCR Meter can measure impedance parameter with 0.1% accuracy.

Supporting various configurable test fixtures, Model GAO2782 can measure frequency ranges of 75 kHz to 30 MHz with resolution of 100 Hz. With 5 mV to 2 V signal level range, it has 0.01 W to 10 MW impedance measurement range, 0.1 pF to 100 Â-µF range for capacitance, and 0.1 nH to 100 mH for inductance. Other measurable parameters include dissipation factor, quality factor, conductance,...

Read More »
MKS Exhibits New Baratron® Differential Capacitance Manometers at Semicon West 2008
Capacitance Meters

MKS Exhibits New Baratron® Differential Capacitance Manometers at Semicon West 2008

Andover, MA, May 2, 2008 - MKS Instruments, Inc. will showcase its new Type 226A and 228A Baratron® Differential Capacitance Manometers at this year's SEMICON West show, July 15-17 in San Francisco. The units provide accurate and repeatable differential pressure and vacuum readings from 1,000 to 0.2 Torr (133 to 0.027 kPa) at ambient temperature. The direct linear signals are accurate for...

Read More »
Clamp Meters provide True RMS measurements.
Capacitance Meters

Clamp Meters provide True RMS measurements.

Including Models EX612, EX613, EX622, and EX623, EX600 Series True RMS Clamp Meters feature IR thermometer for locating hot spots and NCV and dual thermocouple inputs for T1, T2, and T1-T2 differential temperature measurement. With 1.4 in. jaw opening for conductors up to 500 MCM, units provide 40,000 count clamp meter functions for dc voltage, resistance, capacitance and frequency, and can...

Read More »
Programmable Meter is suited for capacitor sorting/grading.
Capacitance Meters

Programmable Meter is suited for capacitor sorting/grading.

Hand-held, battery-powered Model 890B comes with pre-programmed capacitor tolerances of 1, 5, and 10% as well as dedicated chip and microprocessor for programmable high/low limits. Included 4.5 digit LCD can simultaneously display values and deviations from selected tolerances. Along with 11,000 count resolution, capacitance meter offers 9 automatically selected ranges with FS value from 1.0 pF...

Read More »
Hipot Testers provides up to 40 mA of test current.
Capacitance Meters

Hipot Testers provides up to 40 mA of test current.

Used to test high-capacitance products such as manufactured and modular homes, model 1340 incorporates microprocessor control LED display, electronic ramp and dwell timers, and PLC remote control with safety interlock. Navigation menus allow users to set-up test parameters, and user-selectable pulse mode allows unit to continuously output 2.5 kV of ac test voltage with 10 mA of test current....

Read More »
Meter measures capacitor leakage current and IR.
Capacitance Meters

Meter measures capacitor leakage current and IR.

Equipped with LCD display, programmable limits, and voltage monitoring capabilities, Model 1855 is suited for automated production environment or bench-top testing. Unit, also able to measure rise time of electrolytic capacitors in single unit, features 500 mA charge current and 1-650 V programmable dc voltage source. It measures leakage current from 1 nA to 20 mA with basic measurement accuracy...

Read More »
Clamp-On Ammeter is a Category Class III instrument.
Capacitance Meters

Clamp-On Ammeter is a Category Class III instrument.

Hand-held Model 2606 offers measuring ranges of 0 to 1000 amps Ac/Dc, 0 to 1000 Vdc, 0 to 750 Vac (True RMS), resistance from 0 to 40 MOhm, capacitance range of 4 nF to 40 uF, and frequency from 100 Hz to 400 KHz. It also provides Continuity Test and Diode Test. 4000-count instrument, with impact-resistant case and electronic overload protection, is suited for use in field servicing, industrial...

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics