Arc / Resistance Welders

Weld Head suits limited-clearance applications.
Arc / Resistance Welders

Weld Head suits limited-clearance applications.

Orbital Model 8 Series, for fusion TIG applications, welds tube and thin-wall pipe from 0.25-6.625 in. OD. When connected to cooling unit, all components are liquid cooled, including cables, clamp housings, and electrode rotor. Narrow width of head makes it suitable for applications such as welding fitting-to-fitting or fitting-to-valve body assemblies, and welding materials such as stainless...

Read More »
AC/DC TIG Inverter weighs 47 lb for field portability.
Arc / Resistance Welders

AC/DC TIG Inverter weighs 47 lb for field portability.

Dynasty® 200 offers welding range of 5-200 A ac and 1-200 A dc. Auto-Line(TM) technology enables unit to plug into any primary power, from 120-460 V, single or 3-phase, 50 or 60 Hz. It maintains steady welding output even if primary power varies widely. Wind Tunnel Technology(TM) protects electrical components and PC boards from contaminants such as dirt and metal dust created by grinding....

Read More »
Portable AC/DC Inverter handles TIG welding applications.
Arc / Resistance Welders

Portable AC/DC Inverter handles TIG welding applications.

PRO-WAVE 185TSW generates True-Square wave AC/DC output with full range capability from 185 A down to 5 A. Voltage Reduction Device prevents accidental electric shock by reducing OCV when power supply is not in use. Inverter includes Current Sloper; Current Pulser; variable frequency, wave balance control; digital AMP/volt meter; remote control capabilities; and Lift or HF assisted starting. All...

Read More »
TIG Welders come in Ready-Pak(TM) systems.
Arc / Resistance Welders

TIG Welders come in Ready-Pak(TM) systems.

Models TIG 275 and 375 feature MicroStart(TM) TIG technology, which provides arc starting at low amperage levels of 2 A dc or 5 A ac. Units include cable management system, water-cooled torch connections, under-cooler cart water cooler, and separate output studs for work cable/clamp and electrode holder. Ready-Paks are fully assembled and include TIG 275 or 375, zippered torch cover, parts kit,...

Read More »
Diesel Welder suits cross-country pipeline welding industry.
Arc / Resistance Welders

Diesel Welder suits cross-country pipeline welding industry.

Pipeliner® 200D, with all-copper windings, is powered by 4-cylinder, water-cooled Perkins 104.22 engine. It provides 200 A of DC power at 60% duty cycle as tested at 104°F, allowing for welding up to 7/32 in. low hydrogen electrodes. Capable of performing stick and TIG welding and arc gouging, unit has DC generator that provides 1,750 W of DC auxiliary power. Offerings include automatic...

Read More »
Welding Generator has fuel tank that lasts all day.
Arc / Resistance Welders

Welding Generator has fuel tank that lasts all day.

Stick, TIG, wire, and pipe-welding Ranger(TM) 305D has enclosed case, Chopper Technology(TM), and 12 gal fuel tank. Powered by 3-cylinder Kubota® D722 diesel engine, it delivers 9,500 continuous W of 120/240 Vac generator power. Multi-process 300 A dc diesel-engine drive welder offers arc-control adjustment, plus fuel pump with air-bleed system that eliminates manual air bleeding if tank is...

Read More »
Welding System offers remote WFS/voltage control.
Arc / Resistance Welders

Welding System offers remote WFS/voltage control.

Delta-Fab® MIG/flux cored welding system offers 375 A welding power at 100% duty-cycle, 50 to 500 A. Unit produces 10 to 45 open circuit volts to combat voltage drops when power source is stationed away from workspace. Acceptable wires include .035-.045 in. hard and stainless steel wires and 1/16 in. flux cored wires. Drive roll system provides positive feeding for wires .045 and larger and...

Read More »
TIG Welder features adjustable balance control.
Arc / Resistance Welders

TIG Welder features adjustable balance control.

Syncrowave® 180 SD TIG/Stick power source allows operators to preset welding amperage with digital meters. Output is 10 to 180 A in both AC and DC TIG welding mode. Selectable arc start function controls initial volume of current to create soft start, standard start, and hot start. Adaptive Hot Start feature automatically increases amperage during arc start when required. Fan-On-Demand cooling...

Read More »
Wire Welder OHV Engine
Arc / Resistance Welders

Wire Welder OHV Engine

Ranger® 8 is offered with 20.5 hp, twin-cylinder, air-cooled Onan® Performer® gasoline engine that runs at 3,600 rpm. Automatic engine shutdown protects against low oil pressure and prevents engine damage, while automatic engine idler offers fuel economy and noise control. Ranger 8 Onan OHV suits Stick, DC and AC TIG, and general purpose CV wire feed welding. Unit offers 8,000 W...

Read More »
Stud Welding System suits robotic production lines.
Arc / Resistance Welders

Stud Welding System suits robotic production lines.

KSE100 servo-operated weld gun provides precise gun shaft positioning, closed-loop stud feeding, pulse welding, and simplified maintenance. It handles auto feed stud types from 3 to 8 mm shank dia. Position feedback system and servo electric drive controls arc length, lift and plunge velocity, and depth penetration of each stud weld. Programmable pulse welding mode produces square-wave that...

Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
Sponsored

Sentry Equipment Introduces New Compact Hygienic Automatic Sampler

As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers