Arc / Resistance Welders

Arc / Resistance Welders

Robotic Cell welds small to medium sized parts.

Pre-engineered eCell(TM) is capable of MIG, synergic MIG, and MIG pulse welding or flux-cored arc welding on parts which can be welded without reorientation. It is based on Power Wave 355 M digitally controlled, 350 A inverter with ArcLink® communication software and more than 60 factory-programmed waveforms. Dual fixed table workstation includes Fanuc ArcMate 100iBe robot, R-J3iB...

Read More »
Arc / Resistance Welders

Welder/Generator is suited for construction industry.

Housed in stainless steel case, Vantage(TM) 300 employs Lincoln Chopper Technology(TM) to deliver smooth arc for general stick, downhill pipe, TIG, or wire welding. It is powered by 4-cylinder, water-cooled, 1,800 rpm Kubota® diesel engine, which delivers 300 A, 32 V of dc welding output at 100% duty cycle; output range is capable of reaching 400 A. Unit also generates 12,500 W peak 3-phase...

Read More »
DC Inverter Arc Welder produces 5-425 A output.
Arc / Resistance Welders

DC Inverter Arc Welder produces 5-425 A output.

Offering constant voltage and current, XMT® 350 VS features Auto-Line(TM) primary power management technology and is suited for applications that require multiprocess inverter without remote control capabilities. It uses Tweco®-style connectors and includes 4-position process selector switch, adjustable dig and inductance control, Wind Tunnel Technology(TM), and Fan-on-Demand(TM). At...

Read More »
Welding System uses 2 different welding heads.
Arc / Resistance Welders

Welding System uses 2 different welding heads.

Orbitwin allows connection of 2 different types of welding heads to one welding power source, so 2 different tube sizes can be welded without changing weld head cables. Unit automatically detects which head is being activated, selects correct procedure, and switches power, water, and controls to head that is initiated. While one head is in use, other is completely isolated from main welding...

Read More »
Arc / Resistance Welders

MIG Welder features multi-voltage power cord.

Able to connect to 115 and 230 V power receptacles, Millermatic® DVI (Dual Voltage Input) MIG welding power source has 30-175 A operating range. It outputs 90 A @ 20% duty cycle while operating on 115 V and 150 A @ 40% while operating on 230 V. Unit utilizes dual-gear-driven, cast aluminum drive system and comes with power source, M-10 gun and cable assembly, 10 ft work cable and clamp, dual...

Read More »
Arc / Resistance Welders

All-In-One Arc Welding System offers jobsite portability.

Millermatic® Passport(TM) provides MIG arc welding power source, wire feeder, self-contained shielding gas system, and gun in one package. With 30-180 A current output range, system features multi-voltage plug and Auto-Line(TM) power management technology and lets operators choose between internal CO2 gas supply or bulk supply. Inverter-based technology promotes control of arc...

Read More »
Pedestal Welder is built for heavy-duty applications.
Arc / Resistance Welders

Pedestal Welder is built for heavy-duty applications.

Equipped with proprietary weld control, S-NDX has heavy-duty frame with adjustable lower knee and optional T-slot platens. Unit is adaptable to high- and low-volume production, providing capabilities for manual spot welding, robotic welding cells, projection welding, and fixtured welding. It can also be integrated into existing welding and assembly operations. Features include adjustable strokes...

Read More »
Stud Welder makes welds without reverse side marring.
Arc / Resistance Welders

Stud Welder makes welds without reverse side marring.

With weld times of 0.01 sec and charge time of under 3 sec, Capacitor Discharge (CD) 110 Stud Welder may be used for contact and gap CD stud welding. Abbreviated weld time minimizes heat buildup, resulting in minimal discoloration, burning, or reverse side dimples. Unit achieves single-sided welds with minimal distortion on materials as thin as 0.020 in. and offers 110,000 Â-µF of...

Read More »
Power Sources provide pulsed MIG welding.
Arc / Resistance Welders

Power Sources provide pulsed MIG welding.

Millermatic® 350 and 350P offer 208/230 or 460/575 V single- and 3-phase input power, duty-cycle rating of 60% at 300 A/32 V, 25-400 A output, and line voltage compensation. Operators can disconnect MIG gun and replace it with optional push-pull wire feed gun. Model 350P has 4-roll wire drive system with 2 scaled tension adjustments and reversible drive rolls for .035 and .045 wire. Units...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers