Arc / Resistance Welders

Arc / Resistance Welders

Welder/Generator is offered with Deutz engine.

With Deutz D2008L4 4-cylinder, water-cooled diesel engine, Vantage® 300 delivers dc welding output of 300 A at 32 V, 100% duty cycle. Engine runs at 1,800 rpm and is rated at 24 hp. It generates 12.5 kW peak, 3-phase, 240 Vac auxiliary power and 11.5 kW peak, single-phase ac auxiliary power. Fuel tank capacity of 15 gal enables Vantage 300 to run all day. Four process modes include...

Read More »
Resistance Welders handle small to medium sized parts.
Arc / Resistance Welders

Resistance Welders handle small to medium sized parts.

Available in 16, 32, and 48 in. widths with 16 in. upper and lower platen depth, M-Series welds various materials, including steel and stainless steel, and can incorporate multiple guns for custom resistance, spot, or projection welding. Small footprint offers mobility via forklift pockets and accessibility for tooling changeover. Features include X-Y servo driven fixtures and light curtains and...

Read More »
Hybrid Welding System combines laser with GMAW.
Arc / Resistance Welders

Hybrid Welding System combines laser with GMAW.

Hybrid Laser Arc Welding combines deep weld penetration and low heat input of laser welding with power efficiency and gap tolerance of GMAW (gas metal arc welding). Adding GMAW in tandem with laser and filler metal creates wider weld bead and enhances metallurgical stability. Mechanized system utilizes laser only, laser with cold wire fill, or hybrid laser arc welding in 2D gantry, 3D robotic, or...

Read More »
Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show
Arc / Resistance Welders

Miller To Showcase New Plasma Cutter, TIG Welder, Helmet Designs and More at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 2006 Miller Electric (booth #23040) will showcase several new products, enhancements to existing products and a new Roadshow semi trailer-- a traveling welding and cutting exhibition, complete with classroom--at the 2006 Fabtech International/AWS Welding Show in Atlanta. New products on display will include the Sycrowave® 200 AC/DC TIG/Stick welder, the Spectrum® 1251...

Read More »
Weldcraft to Showcase TIG Welding Products at 2006 Fabtech International/AWS Welding Show
Arc / Resistance Welders

Weldcraft to Showcase TIG Welding Products at 2006 Fabtech International/AWS Welding Show

APPLETON, Wis., 25 July 2006-Weldcraft will showcase its TIG welding products in Booth # 24044 at the Fabtech International/AWS Welding Show in Atlanta, October 31 to November 2. Products to be exhibited include the company's upgraded WP17 Series of TIG torches, new (WP17, 18, 20 and 26) torch packages and a line of tungsten. Weldcraft's Legacy Series of TIG torches will also be on display....

Read More »
TIG Torch offers 70° and 180° head configurations.
Arc / Resistance Welders

TIG Torch offers 70° and 180° head configurations.

Suited for limited access joints, air-cooled Model WP-50 is rated at 60% duty cycle up to 50 A and offers pen-like control in tight quarters and on paper-thin material. Entire torch is 8Â-½ in. long and ¾ in. diameter at widest point, with 5/8 in. long x 3/8 in. dia torch head. Compatible tungsten sizes include .020, .040, and 1/16 in. diameters. Torch can be ordered with 12.5 or 25...

Read More »
Resistance Spot Welder suits micro/miniature applications.
Arc / Resistance Welders

Resistance Spot Welder suits micro/miniature applications.

Integrated with gantry robot and rotary indexer, RSX100 Series features resurfacing tool to refinish and clean electrodes at predefined intervals. System uses Windows application interface that stores weld recipe configurations and locations. All process data is stored to MS SQL Server database for report generation and analysis. Available vision system can be used to weld parts with small...

Read More »
TIG Torch has compact, water-cooled design.
Arc / Resistance Welders

TIG Torch has compact, water-cooled design.

Available with 12.5 and 25 ft cable lengths, 410 A Crafter Series(TM) model CS410 incorporates D-Handle(TM) design that has self-indexing flat top and allows welding operators to orient torch by feel. ColorSmart(TM) color-coded hose sets facilitate identification of input water (blue), return water/power cable (red), and gas (black), while reinforced rubber cable assembly offers flexibility in...

Read More »
Arc / Resistance Welders

Welder suits light industrial applications.

Syncrowave® 200 AC/DC TIG/Stick welder provides 5-200 A output power (150 A at 40-percent duty cycle), enough to weld Â-¼-in. aluminum with ac TIG. Single-knob adjustment controls pulse rate from 1-15 pulses/sec, and Syncro-Start(TM) technology allows operators to choose soft, standard, or hot starting, depending on material thickness and tungsten diameter. Syncrowave 200 comes with...

Read More »
Arc / Resistance Welders

Welder/Generator suits construction, pipe, and fleet work.

Powered by 4-cylinder, water-cooled, 1,800 rpm Perkins® diesel engine, Vantage® 400 provides 400 A of dc welding output, 19,000 W peak 3-phase ac generator power, and 12,000 W peak 1-phase ac auxiliary power. Housed in corrosion-resistant stainless steel case, unit includes Lincoln Chopper Technology(TM) for smooth arc, and Voltage Regulation Device(TM), which allows operator to...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers