Arc / Resistance Welders

AC/DC TIG Welders promote optimal low-end arc starts.
Arc / Resistance Welders

AC/DC TIG Welders promote optimal low-end arc starts.

Syncrowave® 250 DX and 350 LX feature low-end DC TIG arc starting capabilities that help prevent burn-through when welding thin metal. While use of 1/6 in. or smaller diameter tungsten electrode is recommended for low-amperage arc starts or welding thin materials, power source's arc starting circuit also provides positive arc starts with 3/32, 5/32, and 1/8 in. dia tungsten. Other features...

Read More »
Stud Weld Tools offer full range adjustments.
Arc / Resistance Welders

Stud Weld Tools offer full range adjustments.

Supplied with standard legs, foot, and cable, Contact and Gap Stud Weld Tools each have stud range capacity of 14 gauge through 3/8 in. Lightweight, ergonomic design minimizes operator fatigue and is compact enough to fit in tight weld areas. Gap model generates gap distances automatically and does not require user to preset gap or lift mechanism manually. Compatible with most stud welding power...

Read More »
All-In-One MIG Welder delivers precise arc control.
Arc / Resistance Welders

All-In-One MIG Welder delivers precise arc control.

Offering 25-210 A of welding power in 77 lb package, Handler® 210 can weld mild steel up to 3/8 in. and aluminum up to Â-¼ in. Low-end control enables welding 24-gauge material without burn-through or excess spatter, while 7 voltage taps and infinite wire feed speed control enable arc adjustments to be made in fine increments. Plugged into 230 Vac outlet, unit delivers full output...

Read More »
Miller to Showcase TIG Welders, Lightweight Plasma Cutter and New Millermatic MIG Welders at 2007 FABTECH International/AWS Welding Show
Arc / Resistance Welders

Miller to Showcase TIG Welders, Lightweight Plasma Cutter and New Millermatic MIG Welders at 2007 FABTECH International/AWS Welding Show

APPLETON, Wis., July 23, 2007 - Miller Electric Mfg. Co. (booth #4071) will showcase its new Dynasty 350 AC/DC TIG inverter, Maxstar 350 DC TIG inverter, Spectrum 375 X-TREME plasma cutter and three new Millermatic models: the Millermatic 212, DVI2 and 252, at the 2007 FABTECH International/AWS Welding Show in Chicago, November 11-14. Additional new products may be announced before the show. Full...

Read More »
MIG Welders eliminate need to lift gas cylinders.
Arc / Resistance Welders

MIG Welders eliminate need to lift gas cylinders.

Millermatic(TM) DVI2(TM) (Dual Voltage Input 230/115 V), 212 (210 amps @ 30% duty cycle), and 252 (250 A @ 40% duty cycle) feature angled dual-gear drive system with spring-loaded drive roll assembly for facilitated wire changes, tool-less drive roll changeover, drive roll storage, and smooth wire feeding. EZ-Change(TM) cylinder rack allows operators roll gas cylinders on and off. Design also...

Read More »
Ferraz Shawmut Arc Flash Mitigation Products Protect Electric Systems from Service Entrances to Motors
Arc / Resistance Welders

Ferraz Shawmut Arc Flash Mitigation Products Protect Electric Systems from Service Entrances to Motors

NEWBURYPORT, Mass., May 9, 2007 - Ferraz Shawmut, a global leader in the field of circuit protection, showcases its Amp-Trap 2000® family of Type "2" (No Damage) circuit protection products. Amp-Trap 2000 current-limiting fuses prevent high-energy arcs that can stop production, damage HVAC equipment, and shut down lighting and communications. Opening in less than one-quarter cycle at fault...

Read More »
Arc / Resistance Welders

Lincoln Electric Helps Ohio Motorcycle Shop Race to the Winners' Circle in TLC's Biker Build-Off Show

Cleveland - To listen to the evening crowd at Rock City Bar & Grille in Mentor, Ohio, on April 5, one would have thought the Cleveland Indians had just made it to the World Series. While it's too early in the baseball season for this to happen, the cheers were just as loud, if not more rambunctious, for Scott Webster, owner of Leroy-Thompson Handcrafted Customs, as he and custom cycle blew away...

Read More »
TIG Welder features high-speed pulsing capability.
Arc / Resistance Welders

TIG Welder features high-speed pulsing capability.

Adjustable from 0.1-5,000 pulses/sec, Maxstar 350 DC TIG/Stick Inverter delivers 5-350 A and features Auto-Line technology, which allows it to run from any input power, 208-575 v, single- or 3-phase. Users can control amount of time each pulse cycle spends at peak amperage from 5-95% of total cycle time and set background or low current pulsing from 5-99% of peak amperage. Welder is suited for...

Read More »
Arc / Resistance Welders

Lincoln Electric Compact Robotic eCell(TM) Provides Cost-Effective Welding Solution

o Affordable for the smallest fabrication shops o Pre-engineered robotic platform offers quality, reliability and added safety o Dual fixed table workstation is designed for small- to medium-sized parts o Optimized layout for maximum flexibility while minimizing floor space Cleveland - For fabrication shops looking to dramatically enhance welding productivity on small- to medium-sized parts, The...

Read More »
AC/DC TIG Inverter welds aluminum up to ¾ in. thick.
Arc / Resistance Welders

AC/DC TIG Inverter welds aluminum up to ¾ in. thick.

Featuring independent AC amplitude/amperage control, Dynasty® 350 AC/DC TIG inverter delivers 5-350 A and runs from 208-575 V, 1- or 3-phase input power source. In DC TIG mode, it permits pulsing at frequencies of 0.1-5,000 pulses/sec, while in AC TIG mode, frequency control of 20-400 Hz at 0.1-500 pulses/sec is allowed, with 4 options for optimizing arc characteristics. Device includes...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers