New Solar Clamp Meter Meets IEC 61010-1 and IEC/EN61010-2-033 Standards
Features LED clear backlit display and light in the clamp jaw that automatically turns on when working in poorly lit areas. Includes high frequency rejection filter, inrush current measurement, internal data logging, and manual DC Amp zeroing. Can measure up to 2,000 V DC and 1,500 V AC (using PVHV leads).
Read More »
New and Improved Digital Clamp Meters Come with 1.38 in. Jaw Opening
Offer integrated NCV tester on meters with audible and visual indicators. Improved temperature accuracy and upgraded lantern-style test-leads. Feature test lead holder on side of clamp for hands-free operation.
Read More »
New Leakage Current Testers Provided with Meter Mode
GLC-9000 features large TFT LCD touch panel for test configuration and displaying measurement setting information. Uses nine measurement device networks to simulate the human body interacting with equipment under test. Measurements are made with up to 0.01 uA and 0.1 V resolution.
Read More »
Emerson Introduces New Greenlee® Flexible Clamp Meters
Both series are capable of reading measurements up to 3000-amps. CE, CETLUS certified clamp meters include leads, soft carrying case and 3 AAA batteries. CMF series measures true RMS AC current, AC voltage, resistance, frequency and inrush current and has a bright LCD screen to display measurements clearly.
Read More »
Things to Consider Before Designing Custom Packaging
This e-Book provides pre-design process considerations for custom corrugated packaging.
Read More »
New CL380 AC/DC Digital Clamp Meter Offers Capability to Measure Current up yo 400A AC/DC
Features a high-visibility reverse contrast LCD display for improved viewability in all lighting conditions. Rugged design stands up to job site demands with 6.6-foot (2m) drop protection as well as CAT III 600V, Class 2 and double insulation safety ratings. Consists low battery indicator and easily accessible battery compartment.
Read More »
Saelig Launches Hioki CM4141 and CM4142 AC Clamp Meters to Deliver Accurate Results when Measuring Distorted AC Current Waveforms
Features unique compact, sturdy jaw design for easy application around existing wiring as well as robust enough to push and pull wiring. Measures cable with a diameter of up to 55mm, providing the ability to measure even thick cables without needing to connect an additional flexible sensor. Parameters like AC current, AC/DC voltage, frequency, continuity, resistance, capacitance, diode and...
Read More »
New Trumeter Graphical Panel Meters from AutomationDirect Feature an Analog Meter-Style Visual for Accurate Readings
AutomationDirect’s Trumeter graphical panel meters measure voltage, current or frequency. Options for the device include 0-600 AC or DC voltage, current at 0-5A direct or 0-9,999A via transducer, and frequency from 2 to 400 Hz. This meter has two independent alarm outputs and two fully scaled analog monitor outputs. The device features a wide horizontal and vertical viewing angle. It has a...
Read More »
New CL450 Clamp Meter Features Auto-ranging True Root Mean Squared Measurement Technology
Klein’s CL450 Clamp Meter is designed for measuring AC current and inrush current. Unit comes with dual backlit 6000 LCD display and two K-type thermocouple ports. Unit can measure AC/DC voltage up to 1000V, 600A AC current, 60MΩ resistance, DC millivolts and microamps, resistance, LoZ, frequency and capacitance. The clamp meter is operated in dedicated mode, low-pass filter and low impedance...
Read More »
Klein's New AC Current Clamp Meter is Used in Measurement of Difficult to Access Areas
Flexible AC Current Clamp Meter features 18 in. clamp for measuring AC current in PLC cabinets or bundled wires and backlit LCD screen with 3000 count display. Unit comes with auto-ranging, True Root Mean Squared measurement technology and CAT IV 600V and CAT III 1000V safety ratings. Meter is drop-protected up to 6.6 ft and captures minimum and maximum values.
Read More »
2000A Digital Clamp Meter comes with backlit display.
2000A AC/DC Digital Clamp Meter is used for measuring AC and DC voltage, inrush current, low impedance and measures 2000A AC/DC, 1000V AC/DC and 60 MΩ. Unit comes with auto-ranging TRMS measurement technology and non-contact voltage tester. Unit features hold function and min/max function for capturing minimum and maximum values. Tester’s audible alerts enable testing continuity, capacitance,...
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
