Ammeters

KROHNE to Showcase Wide Range of Water and Wastewater Products at WEFTEC 2015

KROHNE to Showcase Wide Range of Water and Wastewater Products at WEFTEC 2015

Peabody, MA –-  KROHNE, Inc. will showcase a wide range of its industry-leading water and wastewater products, including its line of analytical sensors at WEFTEC 2015, Booth 3216. The 88th Annual Water Environment Federation Technical Exhibition and Conference will be held September 26th – 30th at McCormick Place in Chicago, Illinois. Visitors to the KROHNE booth will also be able see an...

Read More »
Digital Ammeter takes measurements up to 500 kV.

Digital Ammeter takes measurements up to 500 kV.

Designed to take True AC current measurements up to 2,000 A, 25–500 Hz, Model- HVA-2000 features large LED display that allows real-time or peak current monitoring from long telescoping hotstick. High voltage digital ammeter offers 2 selectable modes: peak hold and real-time tracking for versatility when taking measurements. Since meter can store last 4 readings, there is no need to bring unit...

Read More »
Wireless DC Clamps save, share measurements directly from field.

Wireless DC Clamps save, share measurements directly from field.

With 64 mm jaw size, a3003- clamps around- large, high current conductors and measures up to 2,000 A- DC. Fostering accurate measurements without interrupting workflow, a3004 measures 4–20 mA signals without breaking loop and features detachable clamp with extension cable for measurements in tight locations. Both instruments record and store up to 65,000 measurements with logging feature and...

Read More »
Multichannel Potentiostat provides 1 MS/s sampling rate.

Multichannel Potentiostat provides 1 MS/s sampling rate.

Installed into PMC CHS08A chassis and driven by VersaStudio software, PMC-2000 Channel adds capabilities to PARSTAT MC family of modular potentiostats, providing additional voltage measurement 6-wire capabilities, EIS accuracy to 7 MHz, 30 V Compliance and Polarization, and 1 A of current. Hot-swappable channels permit researchers to add or remove channel without interruption while running...

Read More »
Safety Devices are designed for operation in hazardous areas.

Safety Devices are designed for operation in hazardous areas.

Comprising pushbuttons, pilot lights, selector switches, and ammeters, EU2B safety devices comply with ATEX, C-UL, IEC, and UL/NEC safety standards for use in hazardous areas. Fully sealed construction, rated to IP65 and Type 4X for protection against water, prevents release of sufficient electrical energy which would otherwise- ignite explosive gases or particles in surrounding environment....

Read More »
Mini-Clamp Meter spot checks electrical systems.

Mini-Clamp Meter spot checks electrical systems.

Measuring 5.8 in. tall, pocket-sized AMP-25 AC/DC TRMS Mini-Clamp measures AC/DC load (60/300 A) and in-rush current for motor start-up monitoring, with features like True-RMS for accuracy in electrically noisy environments, non-contact voltage detection, and 300 A low pass filter for variable frequency drive testing. Meter is safety rated CAT III 600 V and features DCA zero and data hold...

Read More »

Amprobe Introduces Five New True-RMS Clamp Meters

The AMP-200 Series general electrical and AMP-300 Series motor maintenance clamps offer a complete range of measuring functions EVERETT, Wash. -- Amprobe(-®) introduces the AMP-200 Series and AMP-300 Series True-RMS clamps offering a complete range of measuring functions for today's modern electrical and motor maintenance applications. The AMP-200 and AMP-300 meters offer True-RMS for accurate...

Read More »
IDEAL Clamp Meter Features Exclusive TightSight(TM) Display for Increased Safety in Tight, Hard-to-Reach Panel Boards

IDEAL Clamp Meter Features Exclusive TightSight(TM) Display for Increased Safety in Tight, Hard-to-Reach Panel Boards

Clamps On Display at Upcoming NECA Show in Chicago SYCAMORE, IL, –- IDEAL TightSight™ clamp meters give electricians an unparalleled level of safety, convenience and performance when measuring high-voltage systems in cramped, hard-to-reach panel boards. Available in four professional-grade models in either 600 or 1000 amp capacities, the clamp meters are the world's first to feature the...

Read More »

Picoammeters and Electrometers operate from 2 pA to 20 mA.

With internal 1,000 V source, B2980A Series of femto/picoammeters and electrometers measure down to 0.01 fA and up to 10 PΩ. Battery operation mode eliminates effect of any AC power noise on measurements and enables detection of previously hidden signals, while time-domain view lets users capture transient signal effects as well as select desired measurement data. Previously only available on...

Read More »
Clamp-On Current Sensor fits existing solid conductors.

Clamp-On Current Sensor fits existing solid conductors.

Able to be clamped onto existing solid conductor without having to disconnect conductor, Sidewinder PA3828NL has- linear current range of 0.1–200 A with 1.0% accuracy for precision power measuring applications at 50/60 Hz AC. This di/dt AC current sensor, with 6.2 mm ID, opens to 7.0 mm to clamp onto- conductor. Clamp feature can be opened and closed multiple times. Another application for...

Read More »

All Topics