SKF CASM-100 Electromechanical Actuators with Modular Design Enable Tailored Solutions for Wide Range of Industrial Linear Movement and Positioning Applications
SKF CASM-100 electromechanical actuators from SKF Motion Technologies, Inc. have been uniquely engineered with a modular design enabling tailored solutions for a wide range of industrial linear movement and positioning applications. Various modules providing choices among motor types, gearboxes, ball screws or roller screws, and accessories allow for custom combinations of components ideally...
Read More »
Oriental Motor Expands DGH II Series with 60mm Rotary Actuator, Eliminating the Need for Additional Sensors
The new 60mm DGH rotary actuator provides highly accurate positioning of large inertia loads while retaining the ease-of-use of its AlphaStep AZ series stepper motor. The product is compatible with four types of AZ series DC input drivers and is suitable for applications requiring step and direction. It is also ideal for using touchscreens or PLCs without the need for additional modules or...
Read More »
New NCM01-04-001-2IBH Voice Coil Actuator Features a Stroke of 2.5 mm
H2W’s NCM01-04-001-2IBH Voice Coil Actuator is suitable for controlled sinusoidal motion applications (1 to 1000 Hz for open loop applications and 1 to 125 Hz for closed loop applications). It features a precision ground 0.125 in. diameter shaft and a high cycle low-wear plastic bushings. It generates 0.5 N and 1.3 N of continuous force and peak force. The actuator can be operated as closed...
Read More »
New ASEPCO AKS Series Actuators Come with Laser Etched Serial Numbers
Watson-Marlow’ ASEPCO AKS Series Actuators are designed for ASEPCO Weirless Radial Diaphragm™ in-line-valves. The units are offered with plastic body combined with stainless steel diaphragm interface that makes them suitable for biotechnology and pharmaceutical markets. The AKS actuators are compliant to GMP standards and the laser etched serial numbers provide full traceability.
Read More »
Pressure Sensor Selection Guide
This white paper provides information and a guideline for pressure sensor selection.
Read More »
Diakont Releases New Line of Gas Turbine Actuators with Forces Up to 220 kN
Gas Turbine Actuators are designed for applications such as inlet guide vane (IGV) control, nozzle guide vane (NGV) control, and fuel valve control. The actuators feature optimized roller screw thread design and tight matching accuracy. The units come with integrated permanent magnet synchronous motor that is paired with machined roller screw. They provide an operating life of more than 20 years.
Read More »
New Motorized Lead Screw Actuators are Offered in NEMA-Standard Bolt-Hole Patterns
The Motorized Lead Screw Actuators are designed for force-sensitive applications that require stroke length shorter than 2.5 in., loads less than 200 lb and speeds below 20 in/s. The units are offered for NEMA 8, 11, 14, 17 and 23 motor frame sizes in single or double stacks. The actuators offer resolutions ranging from 0.063 to 7.5 µin of linear travel per step. They are used in adjustment of...
Read More »
Latest AC-EM 10 Electronic Actuator Can be Used to Remotely Actuate Mechanical Latch
Southco’s AC-EM 10 Electronic Actuator is designed to accommodate higher mechanical loads and facilitates actuation of R4-10 Rotary latch series. The unit is suitable for concealed applications and is used to remotely actuate locks and latches. AC-EM 10 unit is tested to IP55 water and dust protection standards.
Read More »
New Super-Flat Actuators are Offered in 24VDC and 48VDC Versions for Battery-Powered Applications
Harmonic’s FLA Series Super-Flat Actuators are suitable for AGV wheel drives and powered exoskeleton applications. The units are offered in three sizes, multiple ratios and two voltages. The actuators are available with Harmonic Planetary® gearhead or Harmonic Drive® reducer with 8:1 and 9:1 ratios and 50:1 or 100:1 ratios respectively.
Read More »
New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s
SKF’s Ecomag Linear Actuators are available in push models ECO 2/4 and ECO 6/8 and push/pull models ECO 3/5 and ECO 7/9 models. Units offer push-load and pull-load force of up to 6000 N and 4000 N respectively. Having strokes up to 300 mm, actuators feature built-in limit switches. Ecomag actuators are fully tested UL standards and are suitable for use in hospitals, diagnostic centers, and...
Read More »
New Rotary Voice Coil Actuators Feature Moving Coil Design
H2W’s TWR-015-346-2RC High Torque Rotary Coil Actuators deliver a continuous torque 1.29 N-m and peak torque of 3.88 N-m at a duty cycle of 10%. Units generate a total angular displacement of 15° and motor constant of 0.24 N-m/sqrt(watt) per coil and a 0.34 N-m/sqrt(watt) when coupled together. Actuator’s moving coil design provides hysteresis free movement and ripple-free motion. Unit can...
Read More »
Triad's JSU Series of Power Supplies Provide Robust, Low Cost Solutions
Triad Magnetics is an established leader in power supply innovation, offering product lines that span a wide range of diverse industries and applications. Adding to their long list of successful product launches, Triad announces the release of the new cutting-edge JSU Series of power supplies. To learn about all of its advantages and advanced features, see our video.
Read More »
