Oriental Motor Expands DGH II Series with 60mm Rotary Actuator, Eliminating the Need for Additional Sensors
Actuators

Oriental Motor Expands DGH II Series with 60mm Rotary Actuator, Eliminating the Need for Additional Sensors

The new 60mm DGH rotary actuator provides highly accurate positioning of large inertia loads while retaining the ease-of-use of  its AlphaStep AZ series stepper motor. The product is compatible with four types of AZ series DC input drivers and is suitable for applications requiring step and direction. It is also ideal for using touchscreens or PLCs without the need for additional modules or...

Read More »
New NCM01-04-001-2IBH Voice Coil Actuator Features a Stroke of 2.5 mm
Actuators

New NCM01-04-001-2IBH Voice Coil Actuator Features a Stroke of 2.5 mm

H2W’s NCM01-04-001-2IBH Voice Coil Actuator is suitable for controlled sinusoidal motion applications (1 to 1000 Hz for open loop applications and 1 to 125 Hz for closed loop applications). It features a precision ground 0.125 in. diameter shaft and a high cycle low-wear plastic bushings. It generates 0.5 N and 1.3 N of continuous force and peak force. The actuator can be operated as closed...

Read More »
New ASEPCO AKS Series Actuators Come with Laser Etched Serial Numbers
Actuators

New ASEPCO AKS Series Actuators Come with Laser Etched Serial Numbers

Watson-Marlow’ ASEPCO AKS Series Actuators are designed for ASEPCO Weirless Radial Diaphragm™ in-line-valves. The units are offered with plastic body combined with stainless steel diaphragm interface that makes them suitable for biotechnology and pharmaceutical markets. The AKS actuators are compliant to GMP standards and the laser etched serial numbers provide full traceability.

Read More »
Diakont Releases New Line of Gas Turbine Actuators with Forces Up to 220 kN
Actuators

Diakont Releases New Line of Gas Turbine Actuators with Forces Up to 220 kN

Gas Turbine Actuators are designed for applications such as inlet guide vane (IGV) control, nozzle guide vane (NGV) control, and fuel valve control. The actuators feature optimized roller screw thread design and tight matching accuracy. The units come with integrated permanent magnet synchronous motor that is paired with machined roller screw. They provide an operating life of more than 20 years.

Read More »
CMAA Crane Buyer's Guide
Sponsored

CMAA Crane Buyer's Guide

CMAA has organized this Buyer's Guide to promote standardization and to assist prospective buyer's of electric overhead traveling cranes in selection of equipment most suitable for their applications.

Read More »
New Motorized Lead Screw Actuators are Offered in NEMA-Standard Bolt-Hole Patterns
Electric Linear Actuators

New Motorized Lead Screw Actuators are Offered in NEMA-Standard Bolt-Hole Patterns

The Motorized Lead Screw Actuators are designed for force-sensitive applications that require stroke length shorter than 2.5 in., loads less than 200 lb and speeds below 20 in/s. The units are offered for NEMA 8, 11, 14, 17 and 23 motor frame sizes in single or double stacks. The actuators offer resolutions ranging from 0.063 to 7.5 µin of linear travel per step. They are used in adjustment of...

Read More »
New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s
Actuators

New Ecomag Linear Actuators Deliver Positioning Speeds up to 13 mm/s

SKF’s Ecomag Linear Actuators are available in push models ECO 2/4 and ECO 6/8 and push/pull models ECO 3/5 and ECO 7/9 models. Units offer push-load and pull-load force of up to 6000 N and 4000 N respectively. Having strokes up to 300 mm, actuators feature built-in limit switches. Ecomag actuators are fully tested UL standards and are suitable for use in hospitals, diagnostic centers, and...

Read More »
New Rotary Voice Coil Actuators Feature Moving Coil Design
Actuators

New Rotary Voice Coil Actuators Feature Moving Coil Design

H2W’s TWR-015-346-2RC High Torque Rotary Coil Actuators deliver a continuous torque 1.29 N-m and peak torque of 3.88 N-m at a duty cycle of 10%. Units generate a total angular displacement of 15° and motor constant of 0.24 N-m/sqrt(watt) per coil and a 0.34 N-m/sqrt(watt) when coupled together. Actuator’s moving coil design provides hysteresis free movement and ripple-free motion. Unit can...

Read More »
New Electric Failsafe Actuators are Offered with Internal Battery Backup
Actuators

New Electric Failsafe Actuators are Offered with Internal Battery Backup

HRS Series Electric Failsafe Actuators are available in HRS2, HRSN3 and HRSN4 models with up to 440 in-lbs, 1770 in-lbs and 8850 in-lbs torque. Units are offered as stand-alone 24VAC/VDC units or proportional modes and come with internal battery backup and supercapacitor reserve power supplies. The actuators are equipped with 2x volt-free Form A Auxiliary switches and ISO5211 compliant mounting...

Read More »
Locon Sensors Withstand Extreme Temperatures
Sponsored

Locon Sensors Withstand Extreme Temperatures

Locon Sensor Systems offer robust sensor solutions for even the most severe environmental conditions. Their line of high-temp inductive sensors and their cylindrical photoelectric series can operate in temperatures up to 250 degrees Celsius. See our video to learn more.

Read More »

All Topics