AC Motors

AC Motors

Electric Motors are suited for use in oil and gas exploration.

With outside dimensions of 3.5 and 3.625 in., AC induction motors are built for performance and reliability at ambient temperatures up to 450°F and pressures to 30,000 psi. They join single-phase electric motors, with ODs from 1.5-3.625 in. (1.5 hp), which can be offered with gear heads, feedback devices, or other custom requirements. Suited for down hole oil exploration tools, motors are...

Read More »
New 120VAC Induction Motor/Gearbox for U.S.Navy
AC Motors

New 120VAC Induction Motor/Gearbox for U.S.Navy

P/N IMHG-008: 120VAC Single-phase induction motor/gearbox driving essential U.S. Navy auxiliary equipment per Mil-M-17059A (SHIPS) Service A continuous operation in ambient air over very wide ambient temperature range, -40°C to 150°C 150rpm; 100 oz.-in. torque 2in. O.D. x 7.75in. length 2lb. Weight ease of control with just two or three wire 120VAC excitation for single direction or...

Read More »
Severe Duty Motors offer low greenhouse gas emissions.
AC Motors

Severe Duty Motors offer low greenhouse gas emissions.

Suited for heavy-duty industrial applications, X$D Ultra® 841 IEC meets or exceeds requirements of IEEE 841- 2009 standard and is designed and rated for Zone 2 and Division 2 hazardous applications with 200°C or lower temperature code. Class H inverter duty insulation system features rugged cast-iron frame, conduit box, end shields, and fan cover. Included cast-in vibration pads...

Read More »
Brushless Motors/Alternators suit down hole drilling applications.
AC Motors

Brushless Motors/Alternators suit down hole drilling applications.

Available in sizes 8, 10, 12, 15, 18, and 33, Specialty Brushless DC Motors/Alternators for Down Hole Drilling Excavation are designed with high energy materials and environmentally protected for applications where hazardous conditions such as fumes or particles may be present. Thousands of custom designs and modifications - shaft, mounting, military connectors/wiring harnesses, specific bearing...

Read More »
AC Motors

Graphite Commutated DC Micro Motors include 26 mm dia models.

Model 2642 in CXR series motors delivers 23 mNm of continuous duty torque, while model 2657 offers 35 mNm continuous torque. Compact motors operate over temperature range of -30 to +100°C at voltages from 12-48 V. Units can be used in combination with standard servo components, such as high-resolution, 3-channel optical or magnetic encoders, precision planetary gearheads, and programmable...

Read More »
Brushless DC Servomotors are available in twelve 32 mm types.
AC Motors

Brushless DC Servomotors are available in twelve 32 mm types.

Operating at speeds from 5,500-7,100 rpm, BX4 Series electronic commutated 4-pole motors provide continuous cogging-free output torque of 56 or 97 mNm. Reversible motors operate in temperatures from -40 to +100°C and have peak and continuous current limiting capabilities for motor protection. Integrated encoder is available in 4 factory programmable resolutions from 32, 64, 128, to 256...

Read More »
Spindle Motors combine induction and servo technologies.
AC Motors

Spindle Motors combine induction and servo technologies.

Intended for heavy-duty machine tool and motion control applications, Series 1PH8 is available in power range from 2.8-1,340 kW, with solid or hollow shaft to match mechanical interface. Assorted bearing designs enable speeds up to 20,000 rpm, while single stator and rotor design allows modular adaptation of various motor options. Available in forced-air or water-cooled models, motors feature...

Read More »
Uniquely Robust UNICASE Design
AC Motors

Uniquely Robust UNICASE Design

NORDÂ--s unicase design for geared motors integrates all bearing seats into a single-piece casting, thus eliminating all sealing surfaces that could deflect under the effect of torque or radial forces. The finishing of this unicase is carried out with in unique jig, on state-of -the-art CNC machines. The unicase concept features highest levels of precision, rigidity and strength. There are no...

Read More »
Dart Announces Partnership With Leeson Motors
AC Motors

Dart Announces Partnership With Leeson Motors

Dart Controls Inc. has added Leeson Electric to its line of products. This completes Dart's goal to be a preferred resource for drive and motor solutions, both AC and DC. The addition of AC drives from Invertek was announced earlier (See Story ID 576066). Customers have benefitted for over 40 years from free and easy access to Dart's technical expertise and support of DC drives - the addition of...

Read More »
AC Motors

Global Industrial Now Offers HVAC Replacement Motors

Global Equipment Company, otherwise known as GlobalIndustrial.com, ( http://www.globalindustrial.com/c/motors/motors?utm_source=Thomasnet&utm_medium=banner&utm_campaign=hvac_release ) has been working diligently on adding thousands of products to the new Motors department on their website. By doing so, Global Industrial has expanded its already vast selection of over 130,000 products. With this...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers