AC Motors

Crusher Duty Motors range from 5-350 hp.
AC Motors

Crusher Duty Motors range from 5-350 hp.

With high breakdown and locked rotor torque performance, Baldor•Reliance® Crusher Duty Motors meet demands of tough crushing applications worldwide. Units are available in frame sizes from 180–449 T and meet Premium Efficiency energy standards as well as future efficiency standards outlined by Integral Horsepower Rule. Motors with roller bearings as standard are field changeable to ball...

Read More »
Hydraulic Motors employ 3 moving parts for extended service life.
AC Motors

Hydraulic Motors employ 3 moving parts for extended service life.

Without employing gear reducers, Dayton Lamina™ hydraulic motors include 6 models that collectively coverÂ- respective torque and speed capacities from 0–656 lb-in. and 0–2,255 rpm. These low-speed/high-torque, high-speed/low-torque motors feature instant forward and reverse. Other features include bronze-plated bearing surface, positive metal-to-metal sealing, positive splined...

Read More »
Modular Motors are capable of up to 18 MW output.
AC Motors

Modular Motors are capable of up to 18 MW output.

Comprising 4- and 6-pole variants with outputs ranging from 16 MW at 10 kVÂ- to 18 MW at 6 kV (50 Hz), Simotics HV M high-voltage motors have 800 mm shaft height and support options that allow precise adaption to individual applications. Ex p or Ex n variants are suitable for use in areas subject to explosion hazards, and other variants are available for use in temperatures down to...

Read More »
New Polynoid Linear Actuator Line
AC Motors

New Polynoid Linear Actuator Line

With the recent acquisition of the Baldor linear motion product line, H2W Technologies now manufactures an extensive line of AC polynoid linear actuators.Â-  The AC polynoid is an electrically operated, open loop AC linear induction motor that provides a constant force over its entire stroke. It can run directly off of 115 / 230 VAC line voltage or with an adjustable frequency drive. Its...

Read More »
AC Motors

GE Power Conversion Delivers VFD Solution for One of the World's Most Sophisticated and Innovative Motor Test Benches, Helping China Build Tomorrow's Most Efficient and Reliable Pipelines

• With the Complete System Power Output of Up To 50 MVA, this VFD based Motor Test Bench is the Largest in China and One of the Largest Deployed in the World • Power Conversion’s Technical Solution Provides Most Comprehensive Motor Test Modes with Superior Performance in the Most Cost Effective Way • GE’s VFD Solution Allows One Single Test Bench to Complete the Test of Motors with...

Read More »
HEV Motor provides up to 36 Nm torque.
AC Motors

HEV Motor provides up to 36 Nm torque.

Part of Global Vehicle Motor Series of PMAC traction motors, Model GVM142 features 142 mm frame size with SAE A adapter mount to be close coupled to hydraulic pumps. Within frame size, there are 3 rotor lengths and dozens of winding variations, allowing more than 100 combinations of base speed and power output. Operating from 24–800 Vdc, motor is rated from 2.6–30 kW+ with...

Read More »
Three-Phase Induction Motors are built with open enclosure.
AC Motors

Three-Phase Induction Motors are built with open enclosure.

Available in 2- or 4-pole models with frame sizes from NEMA 254T to L6808/09, W40 series can be specified with WPI or WPII levels of environmental protection (depending on frame size) and meet/exceed NEMA standards as well international efficiency requirements. Standard features include rated output of 60 Hz at 15–2,250 hp, and input voltage can be from 208–4,160 V. Suitable for inverter...

Read More »
AC Motors

Baldor Linear Motor Product Line Acquisition

Effective September 24, 2014, H2W Technologies, Inc. ( H2W") headquartered in Santa Clarita, California, USA acquired the following Baldor linear motor products (Cog Free Brushless, Iron Core Brushless, Single Axis Stepper, Dual Axis Stepper, Polynoid, AC Induction, Voice Coil Actuators). Utilizing Baldor tooling and manufacturing practices, H2W will manufacture direct replacement linear electric...

Read More »
Synchronous Drive Systems offer 98% efficiency.
AC Motors

Synchronous Drive Systems offer 98% efficiency.

Operating without need for re-tensioning, Dodge® HT500 Synchronous Belt Drives run slip-free and are suitable for wet and oily environments. Product line includes complete offering of synchronous sprockets with shaft attachment options, including TAPER-LOCK® and fin fan QD bushings as well as minimum plain bore sprockets. As companion to sprockets, belts come in 8 and 14 mm pitch and...

Read More »
AC - GPM Induction Motors have energy efficient design.
AC Motors

AC - GPM Induction Motors have energy efficient design.

Stock versions of Large AC – GPM induction motors come in ratings of 250–1,000 hp, 2,300/4,000 V, Totally Enclosed Fan Cooled (TEFC), foot mounted designs. Custom motors are available in 250–1,500 hp; 460, 575, 2,300/400 V, TEFC, foot mounted designs. Suited for industrial applications requiring high torque, motors feature all-cast iron construction, drive end slinger, insulated opposite...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers