New Hazardous Location Motors with Efficiency of 1.0 or 1.15 Service Factor
Designed for use on pumps, compressors, fans, conveyors and tools in explosive environments. Built to prevent ignition outside the motor by containing sparks, flashing and explosions inside the motor casing. Protects against the side effects of VFD control: electrical damage to the stator windings and bearings.
Read More »
New PMAC Motors Run Synchronously with Input AC Frequency
Contain magnets that follow the internal rotating magnetic field without the slip. Ideal for applications that require velocity control, with a lower price point than servo counterparts. Deliver synchronized movement across multiple axes with energy and cost efficiency.
Read More »
New AXW Large AC Motors for Harsh and Contaminate Filled Environments
AXW 5000 and 5800 motors are available with IP56 rating for protection against contaminants and dust ingress. Suitable for continuous operations due to consistent cooling of water jacket surrounding the motor. Advantages include high power densities, small overall footprint size as well as reduction of noise and heat in surrounding environment.
Read More »
New NEMA AC Motors for Hazardous Area Locations
NXR 7100 is class I div 2 capable and offers more HP per pound than conventional TEFC motors but with small frame size in some power ratings. Available with up to an IP56 rating for protection against contaminates and dust ingress. Internal cooling loop circulates air inside the motor, moving heat from the rotor to the frame, where an external fan blows air over the frame to remove the heat.
Read More »
Heated Deck Panels
Heated Deck Panels: The playbook to how these snow-free walkways work for bridges, sidewalks, and platforms
Read More »New UT Motors Characterized by High Motor Constants, Low Inertia and Low Weight
Stator/rotor sets ranges in diameter from 1.26” to 9.0”. Torque ranges from 7 in-lbs to over 500 in-lbs. Designed to meet torque-density requirements for military and commercial aerospace applications.
Read More »
New AC NEMA Motors Delivers Average of 15% More Power Over Conventional Designs
AXR 5000 and 5800 provides improved cooling, critical factor to extend the life of the motor. Offers more HP per pound than conventional TEFC motors but with smaller frame size in some power ratings. Features sleeve bearings that operate at cooler temperatures, last longer and are easy to maintain.
Read More »
New Three-phase AC Induction Motors with High Strength Right-angle Hypoid Gearhead
Hypoid gears increase torque while reducing noise due to the surface area utilized. Consists of high-strength bearing on both sides of the gearbox due to which radial and axial loads have increased. Mounted in any direction and are available in combination with 30 W, 40 W and 100 W motor models.
Read More »
New H1 grease KIIS Series 3-phase Induction Motor with IP66 Class Protection Terminal Box
Available in 60 W (1/12 HP) and 100 W (1/8 HP) power output. Includes H1 food-grade grease in gearhead and a stainless steel output shaft for applications intended for food processing or packaging. Eight gear ratios from 5:1 up to 180:1 with life of gearhead rated at 5,000 hours.
Read More »
AutomationDirect Presents MTCP2 Cast-Iron AC Motors with V-Ring Shaft Seals
The MTCP2 Cast-Iron Three-Phase AC Motors are offered in 1200, 1800 and 3600 RPM with TEFC enclosures and ribbed design. They are available in T-frame (1 to 300 HP) and TC-frame/face (1 to 30 HP). The motors come with cast iron mounting feet, steel fan cover and cast iron junction box with rubber gasket and rubber dust cover. The units features Class F winding insulation and are electrically...
Read More »
IronHorse MTR2 Series AC Motors meet RoHS, CSA and CE standards.
IronHorse MTR2 Series AC Motors are offered in 1-phase (1800 RPM) and 3-phase (1800 and 3600 RPM) versions. Single phase motors are available in 115/230 VAC voltage models and feature 56C frame, TEFC that provides rigid base or C-face mounting. 3-phase motors offered in 208-230/460 VAC models and come with TEFC frames and cast aluminum end bells and removable mounting bases. Motors are offered...
Read More »
Triad WAU Wall Plug-In AC Power Supply May Be First To Meet Level VI Energy Efficiency Standard
Triad Magnetics, an industry leader and one of the most trusted names in transformer design and manufacturing, is proud to announce the release of the Triad WAU Wall Plug-In AC Power Supply. Engineered to provide robust performance and high reliability, it is setting the standard for 120V/60Hz power supplies. See our video to learn all about it.
Read More »
