AC Motors

Brush Vacuum Motors offer extended life via curved brushes.
AC Motors

Brush Vacuum Motors offer extended life via curved brushes.

Available with both single- and 2-stage fan systems, Eternity Brush motors feature wet bearing protection system and fan diffuser designs that prevent failures from grease washout. These 120 and 230 V motors also employ curved brushes with life ratings from 1,460–3,075 hr that let users operate equipment until brushes are completely worn,Â- signaling motor has reached end of its maximum...

Read More »
Stainless Steel 3-Phase Motors withstand washdown applications.
AC Motors

Stainless Steel 3-Phase Motors withstand washdown applications.

Available in 0.33-2 hp ratings with speeds of 1,800 and 3,600 rpm, IronHorse(TM) general-purpose AC motors are electrically reversible and equipped with junction box with fluorinated silicone rubber gasket and stainless steel cable gland. Each industrial-duty, 56C-frame, TEFC motor features 304 stainless steel frames and stainless steel shafts Rated to IP56, NEMA design B motors are available...

Read More »
Brushless 90 mm Flat Motor integrates MILE encoder.
AC Motors

Brushless 90 mm Flat Motor integrates MILE encoder.

Offering resolutions up to 3,200 impulses/turn and nominal torque of 517 mNm, EC 90 is equipped with MILE (Maxon's Inductive Little Encoder) encoder. Operating principle is based on detection of high-frequency inductivity, which generates eddy current in electrically conducting target. Inductive rotary encoder exhibits robustness towards dust or oil vapor as well as insensitivity regarding...

Read More »
Siemens to Present Innovations for Greater Machine Tool Productivity
AC Motors

Siemens to Present Innovations for Greater Machine Tool Productivity

CHICAGO - At this year's International Manufacturing Technology Show (IMTS) in Chicago, Siemens will introduce new solutions and services for machine tool manufacturers and end-users. Under the theme, "Productivity in Motion," the presentation will focus on turnkey solutions for the job shop, aerospace, automotive, mold/die and medical part manufacturing industries. For machine tool builders and...

Read More »
BLDC Limited Angle Torque Motor features zero cogging.
AC Motors

BLDC Limited Angle Torque Motor features zero cogging.

Featuring 100.0 mm diameter and 100.0 mm stack length, Model LAT40-48 delivers peak torque of 21.5 Nm and ±15° stroke. Use of rare earth magnets creates power density of 10.08 oz-in./W, while single phase winding provides control - 30° excursion is accomplished with no commutation. Since rotor has no preferred position, cogging is eliminated, enabling smooth performance for...

Read More »
AC Motors

Kollmorgen Helps Power Virginia Tech to First Place in the 2011 EcoCAR Challenge

Kollmorgen quickly delivers electric power generation system that satisfies all Virginia Tech's hybrid vehicle operating requirements, while integrating within the complexity of the entire vehicle system RADFORD, VA - Kollmorgen collaborated earlier in the year with Virginia Tech's Hybrid Electric Vehicle Team (HEVT) to develop and integrate the electric power generation system for the HEVT...

Read More »
AC Servo Motor features plug-and-play design.
AC Motors

AC Servo Motor features plug-and-play design.

Supporting speeds up to 4,500 rpm, Junma AC Servo accepts pulse reference input from host controller or PLC. System parameters are set on system power up, machine load inertia is calculated automatically, and tuning gains are adjusted dynamically, even when load changes. Four servo motor and amplifier sets are available with rated outputs from 100-750, capable of both 100 and 200 V input...

Read More »
AC Motors

Converteam Mission-Critical Equipment Achieves Testing Milestone at U.S. Navy Test Site

PITTSBURGH - Power conversion specialist Converteam in partnership with the U.S. Navy have successfully tested the DDG 1000's high voltage Integrated Power System (IPS) (1) to full power at the Land Based Test Site located in Philadelphia, Pennsylvania. DDG 1000 is the first U.S. Navy surface combatant to leverage this technology -- an all-electric architecture providing electric power for both...

Read More »
General-Purpose AC Motors are electrically reversible.
AC Motors

General-Purpose AC Motors are electrically reversible.

Offered with 1-200 hp ratings and 1,200, 1,800, and 3,600 rpm speeds, IronHorse(TM) 3-phase, industrial-duty T-frame and TC-frame TEFC motors feature ribbed cast iron frames for optimal cooling. Products also feature solid full frame length cast iron mounting feet, cast iron junction box with rubber gasket, and rubber dust cover. While motors 10 hp and lower employ maintenance-free bearings,...

Read More »
Compact Torque Motors are available with plug-in or solid shaft.
AC Motors

Compact Torque Motors are available with plug-in or solid shaft.

Series 1FW3 torque motors are available in plug-in shaft version with axis heights of 150, 200, and 280 mm, while solid shaft models are offered for axis heights of 150 and 200 mm. Both versions have rated torque rotational range from 100-7,000 Nm. At height of 280 mm, rated speed range is from 250-600 rpm, suiting motors for use as roller drives. Units are water-cooled and rated power range for...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers