AC Motor Controllers and Drives

Variable Frequency Drives cover 1-100 hp range.
AC Motor Controllers and Drives

Variable Frequency Drives cover 1-100 hp range.

Available with pulse encoder feedback option, AC30 Series provides optimized levels of control, from open-loop pumps and fans to closed-loop process line applications. Integrated energy monitoring functionality facilitates matching of motor speed to varying application demands.Â- Designed to control AC induction or permanent magnet AC motors, drives offer modular construction that...

Read More »
Variable Frequency Drive promotes simple, reliable motor control.
AC Motor Controllers and Drives

Variable Frequency Drive promotes simple, reliable motor control.

Available for 0.25–30 hp applications, Parker AC10 Micro Drive features sensorless vector mode, output frequency up to 650 Hz, and full 150% overload capacity at 0.5 Hz for 1 min. This AC motor speed control will run either AC induction or permanent magnet AC motors. Minimal wiring requirements and 2 accessible terminal rails facilitate and accelerate installation, while auto-tuning sensorless...

Read More »
DC/AC Sine Wave Inverters serve industrial, railway applications.
AC Motor Controllers and Drives

DC/AC Sine Wave Inverters serve industrial, railway applications.

Comprising versions that comply with industrial (EN60950)Â- or rail (EN50155) standards, PRP-260 Series provides up to 260 W of power from 3.9 x 8.7 x 1.5 in. chassis-mount package. Input voltages of 12, 24, 48, 72, and 110 Vdc are inverted to adjustable 120 or 230 Vac outputs regulated to 4% or better. Output frequency can be set to 50 or 60 Hz, and input and output are galvanically...

Read More »
AC Source/Frequency Converter/Inverter serves multiple markets.
AC Motor Controllers and Drives

AC Source/Frequency Converter/Inverter serves multiple markets.

Suited for military, industrial, and commercial applications, Model PF1352Â- features vacuum fluorescent display and delivers 1,350 VA of clean, regulated AC power from 22 x 17 x 3.5 in. benchtop form factor; optional rack mount kit is available. This microprocessor-controlled AC Power Source / Frequency Convertor / Inverter, which provides fully adjustable voltage and...

Read More »
Understanding Water Hammer
Sponsored

Understanding Water Hammer

DFT Inc's engineers have been working with professionals in a range of industries for decades, helping to identify and resolve the underlying causes of water hammer. In this eBook you will learn about many of these common causes, how they impact your system and some of the basic changes you can make to eliminate them. In this eBook you will learn: What causes water hammer and why it is such a persistent problem. The role design plays in reducing the risk water hammer poses to your system. DFT's professional recommendations for coping with water hammer.

Read More »
Winning the Space Race - Beating the Heat
AC Motor Controllers and Drives

Winning the Space Race - Beating the Heat

INDIANAPOLIS — Energy savings versus fixed-speed motor technology have enabled Variable Frequency Drives (VFD)* to make their mark across a broad spectrum of industries via fan, pump and other control applications.Â-  Today an estimated 30%-40% of newly installed AC motors utilize VFD.1 Nevertheless, design engineers face heightened challenges ranging from cost pressures and space...

Read More »
Variable Frequency Drives work with submersible/centrifugal pumps.
AC Motor Controllers and Drives

Variable Frequency Drives work with submersible/centrifugal pumps.

Compatible with multiple pump brands, VARIOspeed MICRO series VFDs offer pre-engineered, variable speed options for deep well submersible pump or centrifugal pump constant pressure control applications. There are two models available, and features include single-phase 230 Vac input, selectable 230 Vac single- or 3-phase output, 0–99 psi transducer, and 4–20 mA signal. Respectively, max output...

Read More »
Siemens Presents Simogear Geared Motors with Integrated Sinamics G110M Inverter
AC Motor Controllers and Drives

Siemens Presents Simogear Geared Motors with Integrated Sinamics G110M Inverter

Nuremberg – New Sinamics frequency inverter and Simogear geared motors as Integrated Drive System (IDS) Simple installation and commissioning High efficiency through optimal component interplay The Siemens Drive Technologies Division is pursuing the integration of drive components and now presents the Sinamics G110M, a distributed inverter designed as a motor-integrated inverter for Simogear...

Read More »
Micro Drives offer IP20 or IP66 rating.
AC Motor Controllers and Drives

Micro Drives offer IP20 or IP66 rating.

Designed to meet needs of system integrators, OEMs, and panel builders, ACS250 Drives come in standard IP20 panel-mounted chassis with feed-through wiring, as well as machine-mounted, IP66/UL Type 4X model with sealed ABS enclosure and corrosion-resistant heat sink for demanding environments, such as washdown applications. IP20 model is available in 1~115 V In / 3~230 V out and 600 V In/Out,...

Read More »
AC Motor Controllers and Drives

VFD and VSD Compared to Intelligent Motor Controllers with Variable VOLTAGE Drive (VVD) Capabilities as Provided by Owl Energy Technologies

Tuckahoe, NY Variable Frequency Drives (VFD) • Ideal when speed control is required • Soft starter capability • Proven Technology Intelligent motor controllers with Variable Voltage Drive capabilities • Ideal when load control is required; matching actual load and motor output • Start-up spike reduction, soft start and soft-stop capability AND Energy Optimization • Can be applied to...

Read More »

All Topics