Stock Drive Products/Sterling Instrument - SDP/SI

Rubber Rings and Bushings provide noise suppression.
Electrical Equipment & Systems

Rubber Rings and Bushings provide noise suppression.

Providing protection for loads ranging from 4-350 lb, A10R 4- Finger-Flex Series exhibits various natural frequencies depending on size and durometer hardness of isolator, which ranges from 30-60. Sizes include 13/16, 1 11/64, 1 3/8, 1 29/32 and 3 in. diameters with -¼, 3/8, 3/8, 9/16, and 5/8 in. bores, respectively. Units provide noise suppression in typewriters, printers, copiers, and other...

Read More »
Gearmotors are reversible for low voltage applications.
Electrical Equipment & Systems

Gearmotors are reversible for low voltage applications.

Suited for low voltage motorized display applications, A 3Z16 Series 36 DC Gearmotors are available in 3, 6, and 12 V versions with no load rpm ranges from .5-115 and gear ratios from 4,300:1-16:1. Reversible gearmotors are enclosed in ABS plastic and feature .125 in. steel shafts; 3 V version is supplied with twist-on clip for 2 D-size batteries. Direction of rotation is clockwise facing shaft,...

Read More »
Planetary Gearheads come in NEMA sizes 17, 23, 34, and 42.
Mechanical Power Transmission

Planetary Gearheads come in NEMA sizes 17, 23, 34, and 42.

Incorporating hardened planet gears machined to AGMA 12 tolerances, Series S9117T-, S9123T-, S9134T-, and S9142T- provide torque multiplication, speed reduction, and inertial matching for dc servo, stepper, and brushless servomotors. Each unit is available with low backlash single- and double-stage reductions with gear ratios ranging from 3:1 to 100:1. Offered in shaft diameters from .250-.625...

Read More »
Shaft Collars feature quick-release, self-locking design.
Mechanical Components and Assemblies

Shaft Collars feature quick-release, self-locking design.

Offered in inch and metric sizes, Grip Fast(TM) A 7Z34 Series is suitable for fastening rotating components and as limit stop for 23 shaft sizes from 1/8-3 in. Collars absorb vibration and shock, and can be removed or adjusted in seconds using one hand, without tools. To operate, user slides Grip Fast onto shaft to correct location. Unit will automatically lock into position. To release, user...

Read More »
Shaft Collars feature integral Fairloc® hub fastener.
Mechanical Components and Assemblies

Shaft Collars feature integral Fairloc® hub fastener.

Available in brass and 303 Stainless Steel, respectively, S25FB9 and S25FY9 Series incorporate built-in bearing shim spacer and fit .12--¾ in. dia shafts. Products come in inch and metric sizes with .433-1.496 in. (11-38 mm) dia ODs. Use of Fairloc-® hubs permits frequent phase, timing, and position adjustment while adding positive metal-to-metal fastening strength along both hub sections....

Read More »
Retaining Rings come in 56 metric sizes.
Electrical Equipment & Systems

Retaining Rings come in 56 metric sizes.

Made of carbon spring steel, Metric Retaining Rings provide tensile strength of 3,164 kg/cm-² and are oil-dipped for added protection. Featuring constant circularity and groove pressure, external Series MD0471M is stocked for 3-120 mm shafts and conforms to DIN 471. Internal Series MD0472M have housing bores from 8-25 mm and meet DIN 472. Identified as Series MD6799M, E-rings are available for...

Read More »
Roller Chain Drive suits limited space applications.
Material Handling & Storage

Roller Chain Drive suits limited space applications.

Molded from Nylatron GS, Model A 6M 7-MT is non-conductive, self-lubricating, and available with .1475 in. or 3.7465 mm pitch. Unit link design eliminates need for master link or special tools for assembly. Each link snaps into next one to form any desired length. Measuring .191 in. wide and .108 in. high, non-corrosive, solvent-resistant drive is suited for stylus or pen assemblies in recorders...

Read More »
Retaining Rings feature grooveless design.
Electrical Equipment & Systems

Retaining Rings feature grooveless design.

Designed for use on ungrooved shafts, bosses, tubes, and studs, S73NW2 Series exerts frictional hold against axial displacement from either direction. Units offer resistance to relative rotation between ring and retained parts, and are reusable while not marring shaft surface during assembly or disassembly. Made of PH 15-7 Mo stainless steel, rings are designed for shaft diameters from 3/32--¾...

Read More »

All Topics