Stock Drive Products/Sterling Instrument - SDP/SI
Hicksville, NY 11801
Timing Belt Pulleys feature integral hub locking system.
Comprised of 34 HTDÃ-® pulleys made of clear anodized aluminum alloy, A 6D23-(inch) and A 6D23M (metric) Series double flange type timing belt pulleys have 3 mm pitch and are designed for .236 in. belts. FairlocÃ-® integral hub fastening design adds positive metal-to-metal fastening strength along entire hub surface. Products, available from stock in 10-44 grooves, come in bore sizes from...
Read More »Shaft Reducers/Extenders have Fairloc hub fastening system.
Comprised of 48 models, S52FCY Series is manufactured in inch and metric sizes to extend shafts to same or different diameters. Hub end of coupling features FairlocÃ-® integral hub fastening system, which eliminates marred shafts. Made of 303 stainless steel, extenders offer zero backlash and are readily adjustable on shaft. They are designed to fit shafts from .120-.500 in. (3-12 mm) dia on...
Read More »Shaft Couplings feature Fairloc integral fastening system.
Comprised of 45 couplings offered in inch and metric sizes, S51FCZ Series joins shafts from .0900-.2498 in. (2.5-12 mm) dia. Inch to metric or metric to inch couplings are also available. Made of 303 stainless steel, zero backlash couplings are readily adjustable on shaft and feature compact, self-contained FairlocÃ-® hub fastening system, which eliminates marred shafts while adding positive...
Read More »Flexible Shafts are suited for remote control assemblies.
Flexible shafts, available as A 7C13-(inch) and A 7C13M (metric) Series, are designed to be panel mounted without casing. Products operate in manual mode and are offered with curvature radius from 20-1.5 in. (500-38 mm). Diameters range from .130-.187 in. (3.3-4.8 mm), and lengths vary from 3-14 in. (76-355 mm).
Read More »Couplings feature torsional vibration isolation.
Available in inch and metric styles, Neo-Flex Series S50F and S50P offer shaft-to-shaft insulation and are designed to fit 3-6 mm shafts or .1200, 1/8, 3/16 and Ã-¼ in. shafts. Center of couplings is 73 durometer molded Neoprene along with 303 stainless steel hubs. Pin type hubs use set screw for fastening, while FairlocÃ-® integral hub fastener eliminates marred shafts and permits...
Read More »Linear Bearings offer extended service life.
Self-lubricated Series S99PS3 and S99PS4 include Frelon lined plain and flanged sleeve bearings that can tolerate up to 1,500 psi over portion of bearing carrying load. Frelon liner material replaces oilite and plastic materials and is impervious to most industrial chemicals and acids. Available in inch sizes to fit shafts ranging from 3/16-Ã-¾ in. diameter, bearings range in length from...
Read More »Sleeves and Bushings offer concentricity without adjustment.
Split square hole sleeve Series A 7C19 is suited for producing tooling such as milling cutters or boring bars without broaching equipment, while split square hole bushing Series A 7C18 fits any mating size collet or 3-jawed chuck. Sleeves are cold-rolled steel C1117 and range in length from -¾-5 in. Bushings are 4140 steel and hardened to Re 40-45. Broached square holes, which range from...
Read More »Linear Ball Bearings feature quiet movement.
Utilizing endlessly recirculating balls, inch-size S99L Series is comprised of standard- and heavy-duty types, which are offered in open, closed, and adjustable styles. Bore sizes range from .375-1.500 in., with dynamic load capacities of 52-663 lbf and static load capacities of 72-1,214 lbf. Sleeves and balls are made of AISI52100 Steel and are hardened to RC 60-64. Overall lengths range from...
Read More »Timing Belts feature .080 pitch.
Made of Kevlar-reinforced polyurethane, Series A6B16-D offers positive, non-slip power transmission without vibration, chatter, or backlash. Double-sided tooth action enables belts to wind between pulleys to synchronize shaft rotations. Capable of operating in temperatures from 0-180Ã-
Read More »Timing Belts provide synchronous control of drives.
Offered in Ã-¼, 5/16, and 3/8 in. widths, Series A 6G3, A 6B3, and A 6R3 feature .200 in. pitch and molded teeth on one side for positive power transmission without slip, vibration, or backlash. Small pitch belts can wind around number of small pulleys to permit multifunction operation in synchronizing shaft rotations. With 20-590 grooves and pitch lengths from 4-118 in., belts come in...
Read More »