Bio-Chem Fluidics, Inc.
Boonton, NJ 07005
Fluid Handling Solutions from Bio-Chem Fluidics at AACC 2011
Boonton, NJ - Bio-Chem Fluidics will feature its electric rotary and solenoid pinch valves for OEM engineers at the American Association for Clinical Chemistry (AACC) Clinical Laboratory Expo, booth 1211. The show takes place at the Georgia World Congress Center (Atlanta, Ga.), from July 24-28. Bio-Chem Fluidics' electric rotary valves provide inert fluid paths for sample collection, loop...
Read More »
Solenoid Operated Pinch Valves suit medical/IVD applications.
Available in both normally closed and normally open configurations, 075 and 100 series pinch valves allow large bore flow passage through flexible tube, which is pinched off to produce tight seal. Valve body with smooth contours facilitates insertion and removal of tubing without snares, while chemically resistant construction offers protection from corrosion. Available with optional tube sensor...
Read More »Micro Pump dispenses high-purity or aggressive fluids.
Featuring TeflonÃ-® fluid path sandwiched within DELRIN base, Model 130 SP micro pump offers stable connection to fittings and/or manifold base, and is designed to contain and control acids, chemicals, and cleaning agents. Self-priming, NC diaphragm pump has factory-set outputs ranging from 10-50 Ã-µl, and can be cycled at up to 2.0 Hz, with flow rates of up to 6.0 ml/min. With up to 20...
Read More »Miniature 4-µL Micro Pump cycles at rates to 4 Hz.
Suited for low-pressure micro-flow low dispensing of high-purity or aggressive liquids, Model 030 pump exhibits minimal heat generation and features positive shutoff. Diaphragm is made of PTFE, pump body is formed of PPS, and check valve is DuPont VitonÃ-® or FKM. Rated for 20 million dispense cycles, pump utilizes solenoid to accelerate micro-volume dispensing. Addition of screw nut offers...
Read More »Bubble Trap prevents disruption to fluid flow.
Mechanical Bubble Trap attaches to laboratory tubing to remove air bubbles that interfere with flow system and produce errors or cause columns to run dry. Installed by attachment to Ã-¼ in.-28 UNF female ports, it measures 30 x 22 mm, and consists of inert PTFE membrane and PEEK housing. Device is suited for use in flow analysis systems, as guard in liquid chromatography, for enzyme reactors,...
Read More »
Quick-Response Miniature Isolation Valves Feature a Range of Customizable Materials and Configurations to Meet Chemical Compatibility Requirements
Boonton, NJ: The series of five fully customizable miniature isolation valves available from Bio-Chem Valve and Omnifit feature a flexible mix and match construction that is determined by solenoid shell size, manifold mountability, and flow configuration. Valve shell diameters are available in 0.38 inch, 0.75 inch and 1.00 inch to correspond to orifice diameters from 0.032 inches to 0.125 inches...
Read More »Tubing Sets ensure leak-free connections.
Pre-assembled Omnifit tubing sets include permanently attached, color-coded Omni-Lok(TM) fitting system on one or both ends to provide finger-tight seal that is suited for use in solenoid valve ports and other shallow PTFE ports. Made with PTFE tubing in 1/16 and 1/8 in. OD sizes, products feature flangeless fitting system which consists of robust, glass-filled polypropylene Omni-Lok fitting nut...
Read More »Dispensing Safety Caps help eliminate mishaps.
Offered in variety of configurations, Dispensing Safety Caps promote safe, controlled fluid and gas flow. Available with optional check valve and filter, T Series prevents gaseous vapors from entering and contaminating work environment while maintaining steady flow equilibrium. Q Series and C Series prevent measurement mistakes while transferring specific liquids, and can be fitted with optional...
Read More »Service facilitates fluid system design and development.
Complete Fluid-System Solutions(TM) transform fluid component supply chain into single-source design, development, and manufacturing process. Service offers project-specific customized solutions to address problems related to non-standard materials, distinctive geometries, and specific flow requirements. Components are offered with pressures from vacuum to 500 psi, port sizes from Ã-¼-28 flat...
Read More »
Solenoid Pumps and Valves offer 0.5 in. footprint.
Inert Solenoid Pumps and Valves are secured to manifold using locked-in threaded mounting collar, which is hand tightened to ensure even load on gasket seal for pressure up to 100 psi. By positioning pump or valve close to point of fluid introduction, screw-in manifold design minimizes internal volume. Valves can be customized in PEEK, PPS, Ultem, acrylic, Chemraz, EPDM, Viton, or TeflonÃ-®...
Read More »Fluid Handling Solutions from Bio-Chem Fluidics at AACC 2011
Boonton, NJ - Bio-Chem Fluidics will feature its electric rotary and solenoid pinch valves for OEM engineers at the American Association for Clinical Chemistry (AACC) Clinical Laboratory Expo, booth 1211. The show takes place at the Georgia World Congress Center (Atlanta, Ga.), from July 24-28. Bio-Chem Fluidics' electric rotary valves provide inert fluid paths for sample collection, loop...
Read More »
Solenoid Operated Pinch Valves suit medical/IVD applications.
Available in both normally closed and normally open configurations, 075 and 100 series pinch valves allow large bore flow passage through flexible tube, which is pinched off to produce tight seal. Valve body with smooth contours facilitates insertion and removal of tubing without snares, while chemically resistant construction offers protection from corrosion. Available with optional tube sensor...
Read More »Micro Pump dispenses high-purity or aggressive fluids.
Featuring TeflonÃ-® fluid path sandwiched within DELRIN base, Model 130 SP micro pump offers stable connection to fittings and/or manifold base, and is designed to contain and control acids, chemicals, and cleaning agents. Self-priming, NC diaphragm pump has factory-set outputs ranging from 10-50 Ã-µl, and can be cycled at up to 2.0 Hz, with flow rates of up to 6.0 ml/min. With up to 20...
Read More »Miniature 4-µL Micro Pump cycles at rates to 4 Hz.
Suited for low-pressure micro-flow low dispensing of high-purity or aggressive liquids, Model 030 pump exhibits minimal heat generation and features positive shutoff. Diaphragm is made of PTFE, pump body is formed of PPS, and check valve is DuPont VitonÃ-® or FKM. Rated for 20 million dispense cycles, pump utilizes solenoid to accelerate micro-volume dispensing. Addition of screw nut offers...
Read More »Bubble Trap prevents disruption to fluid flow.
Mechanical Bubble Trap attaches to laboratory tubing to remove air bubbles that interfere with flow system and produce errors or cause columns to run dry. Installed by attachment to Ã-¼ in.-28 UNF female ports, it measures 30 x 22 mm, and consists of inert PTFE membrane and PEEK housing. Device is suited for use in flow analysis systems, as guard in liquid chromatography, for enzyme reactors,...
Read More »
Quick-Response Miniature Isolation Valves Feature a Range of Customizable Materials and Configurations to Meet Chemical Compatibility Requirements
Boonton, NJ: The series of five fully customizable miniature isolation valves available from Bio-Chem Valve and Omnifit feature a flexible mix and match construction that is determined by solenoid shell size, manifold mountability, and flow configuration. Valve shell diameters are available in 0.38 inch, 0.75 inch and 1.00 inch to correspond to orifice diameters from 0.032 inches to 0.125 inches...
Read More »Tubing Sets ensure leak-free connections.
Pre-assembled Omnifit tubing sets include permanently attached, color-coded Omni-Lok(TM) fitting system on one or both ends to provide finger-tight seal that is suited for use in solenoid valve ports and other shallow PTFE ports. Made with PTFE tubing in 1/16 and 1/8 in. OD sizes, products feature flangeless fitting system which consists of robust, glass-filled polypropylene Omni-Lok fitting nut...
Read More »Dispensing Safety Caps help eliminate mishaps.
Offered in variety of configurations, Dispensing Safety Caps promote safe, controlled fluid and gas flow. Available with optional check valve and filter, T Series prevents gaseous vapors from entering and contaminating work environment while maintaining steady flow equilibrium. Q Series and C Series prevent measurement mistakes while transferring specific liquids, and can be fitted with optional...
Read More »Service facilitates fluid system design and development.
Complete Fluid-System Solutions(TM) transform fluid component supply chain into single-source design, development, and manufacturing process. Service offers project-specific customized solutions to address problems related to non-standard materials, distinctive geometries, and specific flow requirements. Components are offered with pressures from vacuum to 500 psi, port sizes from Ã-¼-28 flat...
Read More »Widest Range of Bottle Cap Configurations Yields Safe, Cost-Effective Liquid Handling Solutions for Laboratories and Instrument Manufacturers
Boonton, NJ: Responding to a need by laboratories for maximizing security and safety when handling liquid transfer operations, Bio-Chem Valve and Omnifit offer the widest range of bottle cap configurations for the safe containment of volatile vapors and transfer of chemicals. The broad range of bottle caps fits securely onto GL32, 38-430 and GL45 glass solvent reservoir bottles. A solid PTFE body...
Read More »