Bio-Chem Fluidics, Inc.
Boonton, NJ 07005
Solenoid Operated Pinch Valves suit medical/IVD applications.
Available in both normally closed and normally open configurations, 075 and 100 series pinch valves allow large bore flow passage through flexible tube, which is pinched off to produce tight seal. Valve body with smooth contours facilitates insertion and removal of tubing without snares, while chemically resistant construction offers protection from corrosion. Available with optional tube sensor...
Read More »Miniature 4-µL Micro Pump cycles at rates to 4 Hz.
Suited for low-pressure micro-flow low dispensing of high-purity or aggressive liquids, Model 030 pump exhibits minimal heat generation and features positive shutoff. Diaphragm is made of PTFE, pump body is formed of PPS, and check valve is DuPont VitonÃ-® or FKM. Rated for 20 million dispense cycles, pump utilizes solenoid to accelerate micro-volume dispensing. Addition of screw nut offers...
Read More »
Quick-Response Miniature Isolation Valves Feature a Range of Customizable Materials and Configurations to Meet Chemical Compatibility Requirements
Boonton, NJ: The series of five fully customizable miniature isolation valves available from Bio-Chem Valve and Omnifit feature a flexible mix and match construction that is determined by solenoid shell size, manifold mountability, and flow configuration. Valve shell diameters are available in 0.38 inch, 0.75 inch and 1.00 inch to correspond to orifice diameters from 0.032 inches to 0.125 inches...
Read More »Tubing Sets ensure leak-free connections.
Pre-assembled Omnifit tubing sets include permanently attached, color-coded Omni-Lok(TM) fitting system on one or both ends to provide finger-tight seal that is suited for use in solenoid valve ports and other shallow PTFE ports. Made with PTFE tubing in 1/16 and 1/8 in. OD sizes, products feature flangeless fitting system which consists of robust, glass-filled polypropylene Omni-Lok fitting nut...
Read More »Dispensing Safety Caps help eliminate mishaps.
Offered in variety of configurations, Dispensing Safety Caps promote safe, controlled fluid and gas flow. Available with optional check valve and filter, T Series prevents gaseous vapors from entering and contaminating work environment while maintaining steady flow equilibrium. Q Series and C Series prevent measurement mistakes while transferring specific liquids, and can be fitted with optional...
Read More »Service facilitates fluid system design and development.
Complete Fluid-System Solutions(TM) transform fluid component supply chain into single-source design, development, and manufacturing process. Service offers project-specific customized solutions to address problems related to non-standard materials, distinctive geometries, and specific flow requirements. Components are offered with pressures from vacuum to 500 psi, port sizes from Ã-¼-28 flat...
Read More »
Solenoid Pumps and Valves offer 0.5 in. footprint.
Inert Solenoid Pumps and Valves are secured to manifold using locked-in threaded mounting collar, which is hand tightened to ensure even load on gasket seal for pressure up to 100 psi. By positioning pump or valve close to point of fluid introduction, screw-in manifold design minimizes internal volume. Valves can be customized in PEEK, PPS, Ultem, acrylic, Chemraz, EPDM, Viton, or TeflonÃ-®...
Read More »
Pinch Valves offer position indication and noise reduction.
Liquid Transfer Pinch Valves are offered with factory-mounted, infrared optical sensor that instantaneously detects position of pinch valve pusher/armature assembly. Noise reduction option reduces intermittent clicking sound associated with solenoid-actuated pinch valves to virtually inaudible soft beat. Noise dampening materials on internal components reduce noise level at point of actuation...
Read More »
Rotary Valve handles wax and aggressive fluids.
Omnifit custom valve, based on 16-port standard inert rotary valve, switches to off position between each port, providing 32 individual positions. Stainless steel rotor and PTFE body are inert to chemicals and stable up to 200Ã-
Read More »
Customized Electric Valves suit laboratory applications.
Suited for chemical, biotechnology, medical, and environmental applications, valves are manufactured from PTFE or other chemically and biologically inert materials. Products incorporate minimal dead volume to eliminate sample contamination and maintain smooth fluid flow. Standard range of electrical rotary valves is complemented by pneumatically-driven valves; all valves have various porting...
Read More »
Solenoid Operated Pinch Valves suit medical/IVD applications.
Available in both normally closed and normally open configurations, 075 and 100 series pinch valves allow large bore flow passage through flexible tube, which is pinched off to produce tight seal. Valve body with smooth contours facilitates insertion and removal of tubing without snares, while chemically resistant construction offers protection from corrosion. Available with optional tube sensor...
Read More »Miniature 4-µL Micro Pump cycles at rates to 4 Hz.
Suited for low-pressure micro-flow low dispensing of high-purity or aggressive liquids, Model 030 pump exhibits minimal heat generation and features positive shutoff. Diaphragm is made of PTFE, pump body is formed of PPS, and check valve is DuPont VitonÃ-® or FKM. Rated for 20 million dispense cycles, pump utilizes solenoid to accelerate micro-volume dispensing. Addition of screw nut offers...
Read More »
Quick-Response Miniature Isolation Valves Feature a Range of Customizable Materials and Configurations to Meet Chemical Compatibility Requirements
Boonton, NJ: The series of five fully customizable miniature isolation valves available from Bio-Chem Valve and Omnifit feature a flexible mix and match construction that is determined by solenoid shell size, manifold mountability, and flow configuration. Valve shell diameters are available in 0.38 inch, 0.75 inch and 1.00 inch to correspond to orifice diameters from 0.032 inches to 0.125 inches...
Read More »Tubing Sets ensure leak-free connections.
Pre-assembled Omnifit tubing sets include permanently attached, color-coded Omni-Lok(TM) fitting system on one or both ends to provide finger-tight seal that is suited for use in solenoid valve ports and other shallow PTFE ports. Made with PTFE tubing in 1/16 and 1/8 in. OD sizes, products feature flangeless fitting system which consists of robust, glass-filled polypropylene Omni-Lok fitting nut...
Read More »Dispensing Safety Caps help eliminate mishaps.
Offered in variety of configurations, Dispensing Safety Caps promote safe, controlled fluid and gas flow. Available with optional check valve and filter, T Series prevents gaseous vapors from entering and contaminating work environment while maintaining steady flow equilibrium. Q Series and C Series prevent measurement mistakes while transferring specific liquids, and can be fitted with optional...
Read More »Service facilitates fluid system design and development.
Complete Fluid-System Solutions(TM) transform fluid component supply chain into single-source design, development, and manufacturing process. Service offers project-specific customized solutions to address problems related to non-standard materials, distinctive geometries, and specific flow requirements. Components are offered with pressures from vacuum to 500 psi, port sizes from Ã-¼-28 flat...
Read More »Widest Range of Bottle Cap Configurations Yields Safe, Cost-Effective Liquid Handling Solutions for Laboratories and Instrument Manufacturers
Boonton, NJ: Responding to a need by laboratories for maximizing security and safety when handling liquid transfer operations, Bio-Chem Valve and Omnifit offer the widest range of bottle cap configurations for the safe containment of volatile vapors and transfer of chemicals. The broad range of bottle caps fits securely onto GL32, 38-430 and GL45 glass solvent reservoir bottles. A solid PTFE body...
Read More »
Solenoid Pumps and Valves offer 0.5 in. footprint.
Inert Solenoid Pumps and Valves are secured to manifold using locked-in threaded mounting collar, which is hand tightened to ensure even load on gasket seal for pressure up to 100 psi. By positioning pump or valve close to point of fluid introduction, screw-in manifold design minimizes internal volume. Valves can be customized in PEEK, PPS, Ultem, acrylic, Chemraz, EPDM, Viton, or TeflonÃ-®...
Read More »
Pinch Valves offer position indication and noise reduction.
Liquid Transfer Pinch Valves are offered with factory-mounted, infrared optical sensor that instantaneously detects position of pinch valve pusher/armature assembly. Noise reduction option reduces intermittent clicking sound associated with solenoid-actuated pinch valves to virtually inaudible soft beat. Noise dampening materials on internal components reduce noise level at point of actuation...
Read More »
Rotary Valve handles wax and aggressive fluids.
Omnifit custom valve, based on 16-port standard inert rotary valve, switches to off position between each port, providing 32 individual positions. Stainless steel rotor and PTFE body are inert to chemicals and stable up to 200Ã-
Read More »