Maxim Integrated

Amplifier suits automotive entry/tire pressure monitoring.
Communication Systems & Equipment

Amplifier suits automotive entry/tire pressure monitoring.

Operating in 315 and 433 MHz bands, MAX2634 is designed for remote keyless entry and tire pressure monitoring applications. It consumes 2.5 mA of supply current and eshibits 1.25 dB noise. Logic-enabled shutdown reduces supply current to under 1 Â-µA. Contained in 2.0 x 2.2 mm, 6-pin SC70 package, amplifier operates from 2.2-5.5 V supply and is specified over -40 to +125°C temperature...

Read More »
Multimode Silicon Tuner targets mobile TV applications.
Communication Systems & Equipment

Multimode Silicon Tuner targets mobile TV applications.

Receiving signals in FM, VHF-III, UHF, and L-band spectrums, MAX2169 operates in either zero-IF mode for DVB-H and ISDB-T or in low-IF mode for DAB and T-DMB. It operates from 2.7 V supply, consuming 130 mW when receiving ISDB-T 13-segment signals, while power consumption in L-band mode is 110 mW. Available in 6 x 6 mm, 40-pin TQFN package, it includes on-chip tracking and low-pass filters. Unit...

Read More »
Touch-Interface ICs integrate haptic controller drivers.
Electrical Equipment & Systems

Touch-Interface ICs integrate haptic controller drivers.

Available in 25 MHz SPI(TM) and 400 kHz IÂ-²C versions, MAX11810 and MAX11811 are touch-interface systems with integrated 4-wire touch-screen controllers, haptic controller drivers, and IR-based proximity sensing. Each operates from one 1.7-3.6 V supply and can drive DC motor directly or piezo elements using external piezo driver. Also included, automatic validation of touch responses...

Read More »
Overvoltage Protectors integrate USB charger detection.
Electrical Equipment & Systems

Overvoltage Protectors integrate USB charger detection.

Models MAX14529E and MAX14530E provide high-current USB charger detection and ±15 kV ESD protection for portable devices. Offered in 1.5 x 2 mm, 1-bump wafer-level package, they include MOSFET to protect low-voltage systems against voltage faults up to 28 V. Units operate over -40 to +85°C temperature range. Devices are suited for cell phones, media players, PDAs, and other...

Read More »
Current-Limit Switches are programmable from 50-600 mA.
Electrical Equipment & Systems

Current-Limit Switches are programmable from 50-600 mA.

Housed in 1.4 x 1.8 mm UTQFN package, Models MAX4995A/MAX4995AL/MAX4995B/MAX4995C/MAX4995AF feature ±10% accurate current limit, protecting host devices against faulty load conditions. To handle overcurrent events, Models MAX4995A/MAX4995AL/MAX4995AF go into autoretry mode, while Model MAX4995B latches off switch, and Model MAX4995C places device in continuous current-limit mode. All...

Read More »
Smart-Card Interface features 10 nA stop-mode current.
Controls & Controllers

Smart-Card Interface features 10 nA stop-mode current.

Operating from -40 to +85°C, Model DS8313 performs level translation between host microcontroller and 5, 3, or 1.8 V smart card, while providing up to 80 mA for smart-card operation. Unit includes ±8 kV ESD protection to prevent damage to application during card insertion and removal. Designed for ISO 7816 and B-CAS applications, DS8313 is suited for pay/premium TV, financial...

Read More »
Low-Dropout Linear Regulators dissipate up to 1.9 W at 70°C.
Controls & Controllers

Low-Dropout Linear Regulators dissipate up to 1.9 W at 70°C.

Supplied in 3 x 3 mm, thermally enhanced, 10-pin TDFN package and specified over -40 to +125°C range, MAX15027-MAX15030 operate from 1.425-3.6 V input and deliver up to 1 A or 500 mA output current (depending on model). Additional bias input on MAX15028/MAX15030 lets devices be powered from independent supply and allows regulator input to reduce current to 2 Â-µA (max) during shutdown....

Read More »
Dual-Channel DAC facilitates power-supply margin testing.
Electrical Equipment & Systems

Dual-Channel DAC facilitates power-supply margin testing.

Housed in 8-pin Â-µSOP, 7-bit I²C-controlled Model DS4432 features 2 output channels, each providing fine control of DC-DC power supply by sinking or sourcing current directly into power supply's feedback node. Full-scale output currents are set between 50-200 µA using one external resistor for each channel. Through I²C bus, output currents can then be set to any of...

Read More »
Re-Drivers support high-speed serial interfaces.
Computer Hardware & Peripherals

Re-Drivers support high-speed serial interfaces.

Designed to re-drive PCIe® Gen I and Gen II signals up to 5.0 Gbps, MAX4950 integrates 4 programmable signal-amplitude buffers, each of which features electrical idle and receive detection. Dual-channel MAX4951 re-drives SATA/eSATA Gen 1, Gen II, and Gen III signals up to 1.5, 3.0, and 6.0 Gbps, respectively. Device preserves signal integrity at receiver by re-establishing full output...

Read More »

All Topics