Binks
Glendale Heights, IL 60139
Share:
Binks and DeVilbiss Brands to Showcase Broad Range of Wood Finishing Equipment at the 2007 Association of Woodworking and Furnishings Suppliers Fair
June 2007, Glendale Heights, IL - ITW Industrial Finishing, manufacturers of Binks and DeVilbiss industrial spray finishing equipment, will be featuring a number of wood finishing spray guns, pumps, and outfits at the 2007 Association of Woodworking and Furnishings Suppliers Fair (AWFS), taking place Wednesday, July 18 through Saturday, July 21 at the Las Vegas Convention Center in Las Vegas,...
Read More »Binks Offers Range of Pumps for Varied Finishing Applications
December, 2006 - Glendale Heights, IL -- Binks offers a full range of spray finishing pumps, each designed for maximum durability and dependability. The Binks Exel(TM) Pump -- used for catalyzed coatings, high solids coatings, abrasive materials, solvent- and water-borne fluids, moisture sensitive materials and UV-cure coatings - are self-priming and offer accessible parts replacement. (Cartridge...
Read More »Spray Finishing Pumps meet various application requirements.
Self-priming Exel(TM) pumps come with hard chrome-plated stainless steel pistons with pressure-loaded wiper seals, pilot valves, and aluminum/stainless steel wetted parts. Pogo(TM) pumps feature 2-ball, double-acting pump design and 2 in. air motor. For continuous operation, Boss(TM) pump employs reversible sharp-edge carbide seats, heavy hard chrome-plated cylinder and rod, spring load u-cups,...
Read More »Binks Helps Fine-Tune Finishing With Tips And Gun Extensions
December, 2006 - Glendale Heights, IL - Binks continues to enhance its product offerings for unsurpassed atomization and spray finishing performance. The new Binks 114-Series (TM) Premium Air Assisted Airless Tips have been designed to provide superior spray pattern uniformity that delivers consistent coverage, and provides new levels of quality when spraying stain, toner, lacquer and top coat...
Read More »Binks to Showcase Depth of Guns, Pump Options at Upcoming IBEX 2006 Trade Show
October, 2006, Glendale Heights - Binks will be featuring its Air Assisted Airless LEL (Low Emissions Laminators) Gel-Coat and chopper equipment, and the Boss High Volume FRP Pump at the upcoming IBEX 2006 Show, being held at the Miami Beach Convention Center from November 1-3. IBEX is dedicated to the next generation of boatbuilding technologies. Show attendees will be able to learn about Binks...
Read More »
Binks LEL(TM) Equipment Offers Significant Savings in Maintenance and Parts
Popularity of Systems Extends to Atypical Industry Applications September 2006, Glendale Heights - The Binks LEL(TM) (Low Emission Laminators) gel coat systems are recognized as one of the most cost-efficient and highest quality MACT-compliant cast polymer application technologies available today. Known primarily for highly controlled and environmentally friendly cultured marble applications, the...
Read More »Spray Gun Tips provide fan pattern uniformity.
Providing even coating build on product, 114-Series premium air assisted airless tips are used for spraying stain, toner, lacquer, and top coats using low, medium, and high viscosity materials. Tips provide consistent fluid flow, streakless coverage, and coating atomization. Used with AA1500, AA4000, and MAG AA automatic spray guns, tips suit cabinet fascia, wood furniture, metal office products,...
Read More »
Automatic Spray Gun is suited for UV-coating applications.
Used in wood and metal industries, MAG AA UV Spray Gun employs carbide needle, leak-resistant carbide seat, and solvent-resistant O-rings. It supports atomization of various coating viscosities and features stainless fluid passages for water- and solvent-based materials. While wood industry applications include cabinets, flooring, milled products, and doors, metal industry applications include...
Read More »Binks Comet 3-B Outfits- Complete System for Quality Finishing for Wood and Metal Applications
Meets High-Production Demands for Today's Modern Coating Materials March, 2006, Glendale Heights - Binks Comet 3-B Outfits offer a complete system for dependable, quality finishing for wood and metal applications. They are designed to meet the demand for high-volume single- or multi-gun spraying setups used in applications including wood cabinets, doors and windows, metal fabrication, wood...
Read More »Spray Guns minimize build-up of acid catalyzed coatings.
Suited for spraying aircraft components, Models AA1500 and 4000 are equipped with air cap that can be used with primers and urethane top coats. Side port control on air cap provides balance between atomizing air and fan air, optimizing atomization quality. Fan pattern adjustment enables users to spray hard-to-reach wing areas and small aircraft components. Design minimizes operator fatigue and...
Read More »Binks Announces New Website
Site Redesigned to Continue Company Commitment to Customer Satisfaction July, 2007, Glendale Heights - Binks announces a new website, designed to provide up-to-the-minute information about its products and services. The site is built around the company mission to be the preferred provider of liquid finishing solutions for industrial users and professional contractors. A big part of customer...
Read More »Binks and DeVilbiss Brands to Showcase Broad Range of Wood Finishing Equipment at the 2007 Association of Woodworking and Furnishings Suppliers Fair
June 2007, Glendale Heights, IL - ITW Industrial Finishing, manufacturers of Binks and DeVilbiss industrial spray finishing equipment, will be featuring a number of wood finishing spray guns, pumps, and outfits at the 2007 Association of Woodworking and Furnishings Suppliers Fair (AWFS), taking place Wednesday, July 18 through Saturday, July 21 at the Las Vegas Convention Center in Las Vegas,...
Read More »Binks Offers Range of Pumps for Varied Finishing Applications
December, 2006 - Glendale Heights, IL -- Binks offers a full range of spray finishing pumps, each designed for maximum durability and dependability. The Binks Exel(TM) Pump -- used for catalyzed coatings, high solids coatings, abrasive materials, solvent- and water-borne fluids, moisture sensitive materials and UV-cure coatings - are self-priming and offer accessible parts replacement. (Cartridge...
Read More »Spray Finishing Pumps meet various application requirements.
Self-priming Exel(TM) pumps come with hard chrome-plated stainless steel pistons with pressure-loaded wiper seals, pilot valves, and aluminum/stainless steel wetted parts. Pogo(TM) pumps feature 2-ball, double-acting pump design and 2 in. air motor. For continuous operation, Boss(TM) pump employs reversible sharp-edge carbide seats, heavy hard chrome-plated cylinder and rod, spring load u-cups,...
Read More »Binks Helps Fine-Tune Finishing With Tips And Gun Extensions
December, 2006 - Glendale Heights, IL - Binks continues to enhance its product offerings for unsurpassed atomization and spray finishing performance. The new Binks 114-Series (TM) Premium Air Assisted Airless Tips have been designed to provide superior spray pattern uniformity that delivers consistent coverage, and provides new levels of quality when spraying stain, toner, lacquer and top coat...
Read More »Binks & DeVilbiss Offer Options to Reduce Contaminants
November, 2006 - Glendale Heights, IL -- Binks and DeVilbiss, pioneers in the development of liquid spray finishing technology, offer equipment options that offer significantly higher levels of contaminant-free finishing. The Binks line of High Efficient spray booth Air Filters (AF HE) is appropriate for all general industrial applications. AF HE filters provide two-in-one performance, with a...
Read More »Binks to Showcase Depth of Guns, Pump Options at Upcoming IBEX 2006 Trade Show
October, 2006, Glendale Heights - Binks will be featuring its Air Assisted Airless LEL (Low Emissions Laminators) Gel-Coat and chopper equipment, and the Boss High Volume FRP Pump at the upcoming IBEX 2006 Show, being held at the Miami Beach Convention Center from November 1-3. IBEX is dedicated to the next generation of boatbuilding technologies. Show attendees will be able to learn about Binks...
Read More »
Binks LEL(TM) Equipment Offers Significant Savings in Maintenance and Parts
Popularity of Systems Extends to Atypical Industry Applications September 2006, Glendale Heights - The Binks LEL(TM) (Low Emission Laminators) gel coat systems are recognized as one of the most cost-efficient and highest quality MACT-compliant cast polymer application technologies available today. Known primarily for highly controlled and environmentally friendly cultured marble applications, the...
Read More »Spray Gun Tips provide fan pattern uniformity.
Providing even coating build on product, 114-Series premium air assisted airless tips are used for spraying stain, toner, lacquer, and top coats using low, medium, and high viscosity materials. Tips provide consistent fluid flow, streakless coverage, and coating atomization. Used with AA1500, AA4000, and MAG AA automatic spray guns, tips suit cabinet fascia, wood furniture, metal office products,...
Read More »
Automatic Spray Gun is suited for UV-coating applications.
Used in wood and metal industries, MAG AA UV Spray Gun employs carbide needle, leak-resistant carbide seat, and solvent-resistant O-rings. It supports atomization of various coating viscosities and features stainless fluid passages for water- and solvent-based materials. While wood industry applications include cabinets, flooring, milled products, and doors, metal industry applications include...
Read More »