Bimba Manufacturing Co.

Position Feedback Cylinders are resistant to contamination.
Construction Equipment and Supplies

Position Feedback Cylinders are resistant to contamination.

Factory-calibrated for 0-10 Vdc output, PFCN non-contact pneumatic position feedback cylinders are resistant to effects of moisture, oil, airborne debris, dust, and airline contamination. Magnetostrictive sensor, fixed inside cylinder, detects position as piston moves back and forth, avoiding cylinder wear and tear from rapid short-stroke cycling. All models come in 09, 17, 31, 50, and 70 bore...

Read More »
Air Cylinders feature PTFE impregnated hard anodized body.
Construction Equipment and Supplies

Air Cylinders feature PTFE impregnated hard anodized body.

Designed to facilitate machine changeovers, EFP Extruded Flat MultiPosition Cylinder provides 3 positions in one package, while EFQ Extruded Flat MultiForce Cylinder features 2-piston design that eliminates need for higher pressure systems or unique configurations. To save air volume, only one piston is pressurized on return stroke. Both double-acting, single rod end cylinders can connect to and...

Read More »
Electric Slides provide precise positioning.
Laboratory and Research Supplies and Equipment

Electric Slides provide precise positioning.

Offered in 09 and 17 frames, Electric Ultran High Load Slides are available with DC motor, step motor, or no motor in strokes up to 72 in. DC motor-driven slides produce max thrusts from 5-168 lb at max speeds from 16-40 ips, while step motor-driven slides produce max thrusts from 12-200 lb at max speeds from 15-25 ips. Fine frame provides better than 0.010 in. position control, while Coarse...

Read More »
Construction Equipment and Supplies

Bimba Offers Same Day Shipment on Bimba Extruded Flat and Flat-1 Cylinders

Monee, IL - October 17, 2006 - Bimba Manufacturing announces that it has placed more of the most popular bore sizes and stroke length combinations of the Extruded Flat and Flat-1 cylinders on the shelf, making them available for same day shipment. These models include Flat-1 (FO, FOD, FOS, FS, FT), Twist Clamp (EFCL, EFCR), and now, Extruded Flat (EF, EFT) and Stoppers (EFL, EFLR). These EF, EFT,...

Read More »
Air Cylinder boosts max air flow rate to 250 psi.
Construction Equipment and Supplies

Air Cylinder boosts max air flow rate to 250 psi.

Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as...

Read More »
Stainless Steel Cylinder is available in 8 bore sizes.
Computer Hardware & Peripherals

Stainless Steel Cylinder is available in 8 bore sizes.

With round, smooth bodied design, Repairable Stainless Steel Cylinder (RS Series) suits washdown environments and other applications that require all stainless steel design. Product, available in 1Â-½, 2, 2½, 3¼, 4, 5, 6, and 8 in. bore sizes, meets USDA and 3-A sanitary specifications and is suited for use in food industry. It can also be accepted for use in dairy plants...

Read More »
Pneumatic Lift Table has 125 mm bore size.
Machinery & Machining Tools

Pneumatic Lift Table has 125 mm bore size.

Pneumatic Lift Table consists of stable cylinder that incorporates 4 guide shafts for max rigidity. Designed for limited-space lifting applications where other non-rotating cylinders cannot handle overhung load, product has PTFE-impregnated hard anodized body and is available with stroke lengths in 5 mm increments to 100 mm. Unit is offered in 50, 80, and 125 mm bore sizes, latter of which can...

Read More »
Construction Equipment and Supplies

Position Feedback Cylinder features integral rod lock.

Offered in 5 sizes, Model PFCL incorporates clamp/cam device to hold piston rod in position upon loss of air pressure. Holding forces range from 90 lb in 1 1/16 in. bore cylinder to 700 lb in 3 in. bore. Rod lock offers positive, rigid, mid-position stop. Used as static locking device, it can be applied once piston rod is in stopped position. Applications include variable press, flow gate, work...

Read More »
Position Feedback Cylinders are resistant to contamination.
Construction Equipment and Supplies

Position Feedback Cylinders are resistant to contamination.

Factory-calibrated for 0-10 Vdc output, PFCN non-contact pneumatic position feedback cylinders are resistant to effects of moisture, oil, airborne debris, dust, and airline contamination. Magnetostrictive sensor, fixed inside cylinder, detects position as piston moves back and forth, avoiding cylinder wear and tear from rapid short-stroke cycling. All models come in 09, 17, 31, 50, and 70 bore...

Read More »
Air Cylinders feature PTFE impregnated hard anodized body.
Construction Equipment and Supplies

Air Cylinders feature PTFE impregnated hard anodized body.

Designed to facilitate machine changeovers, EFP Extruded Flat MultiPosition Cylinder provides 3 positions in one package, while EFQ Extruded Flat MultiForce Cylinder features 2-piston design that eliminates need for higher pressure systems or unique configurations. To save air volume, only one piston is pressurized on return stroke. Both double-acting, single rod end cylinders can connect to and...

Read More »
Electric Slides provide precise positioning.
Laboratory and Research Supplies and Equipment

Electric Slides provide precise positioning.

Offered in 09 and 17 frames, Electric Ultran High Load Slides are available with DC motor, step motor, or no motor in strokes up to 72 in. DC motor-driven slides produce max thrusts from 5-168 lb at max speeds from 16-40 ips, while step motor-driven slides produce max thrusts from 12-200 lb at max speeds from 15-25 ips. Fine frame provides better than 0.010 in. position control, while Coarse...

Read More »
Construction Equipment and Supplies

Bimba Offers Same Day Shipment on Bimba Extruded Flat and Flat-1 Cylinders

Monee, IL - October 17, 2006 - Bimba Manufacturing announces that it has placed more of the most popular bore sizes and stroke length combinations of the Extruded Flat and Flat-1 cylinders on the shelf, making them available for same day shipment. These models include Flat-1 (FO, FOD, FOS, FS, FT), Twist Clamp (EFCL, EFCR), and now, Extruded Flat (EF, EFT) and Stoppers (EFL, EFLR). These EF, EFT,...

Read More »
Air Cylinder boosts max air flow rate to 250 psi.
Construction Equipment and Supplies

Air Cylinder boosts max air flow rate to 250 psi.

Designed for maximum air pressure input of 125 psi, High Flow Booster 2:1 is available in 4 in. bore size that results in maximum cylinder output pressure of 250 psi. Compact design, with body and center section made of aluminum hard coat with PTFE, suits applications with limited space. Product handles operating temperatures from 15 to 160°F and is designed for intermittent use, such as...

Read More »
Company News

Bimba's New "Solutions Shop(TM)" Microsite Up and Running

Customers Can Browse and Request Custom Solutions Online Monee, IL - September 13, 2005 - Bimba Manufacturing announced today the launch of its new Solutions Shop" microsite, bimba.com/solutionshop, accessible through the company's homepage. Bimba, a leading producer of actuation technology, designed this online tool for customers whose project requirements cannot be met by the off-the-shelf...

Read More »
Stainless Steel Cylinder is available in 8 bore sizes.
Computer Hardware & Peripherals

Stainless Steel Cylinder is available in 8 bore sizes.

With round, smooth bodied design, Repairable Stainless Steel Cylinder (RS Series) suits washdown environments and other applications that require all stainless steel design. Product, available in 1Â-½, 2, 2½, 3¼, 4, 5, 6, and 8 in. bore sizes, meets USDA and 3-A sanitary specifications and is suited for use in food industry. It can also be accepted for use in dairy plants...

Read More »
Pneumatic Lift Table has 125 mm bore size.
Machinery & Machining Tools

Pneumatic Lift Table has 125 mm bore size.

Pneumatic Lift Table consists of stable cylinder that incorporates 4 guide shafts for max rigidity. Designed for limited-space lifting applications where other non-rotating cylinders cannot handle overhung load, product has PTFE-impregnated hard anodized body and is available with stroke lengths in 5 mm increments to 100 mm. Unit is offered in 50, 80, and 125 mm bore sizes, latter of which can...

Read More »

All Topics