Nordson EFD
East Providence, RI 02914
Nickel Squeegee outperforms steel and polyurethane.
Squeegee lubricity reduces friction when applying solder pastes, which minimizes wear and extends stencil and squeegee life. Chemical-resistant product includes blades that can be rotated as they wear to provide four working faces. Adjustable holder, used with squeegees, provides unique geometry that optimizes material roll, facilitating faster print speeds.
Read More »
Lubrication System applies oil to stock and dies.
MicroCoatÃ-® 780 Series provides steady or pulsed lubrication up to 300 times/min. It includes valve, valve controller, and 1, 5, or 20 gal tank. Valves use low volume, low pressure air to evenly coat stock or dies with fine, consistent film of oil. One valve covers area from 3/16-6.5 in. wide. If wider coverage is required, additional valves can be mounted side-by-side. Stroke control...
Read More »
Syringe Reservoirs block light wavelengths from 240-550 nm.
Used with air-powered dispensing systems, LB Series syringes have translucent, dark amber reservoirs that prevent UV-cure adhesives and light-sensitive assembly fluids from curing prematurely. Users can monitor fluid levels and check for bubbles in fluid. SmoothFlow(TM) pistons, installed after reservoirs are filled, prevent dripping and eliminate fluid waste by wiping reservoir walls 97% clean....
Read More »
Dispensing Kit provides air-powered dispensing.
ULTRASAVER(TM) multi-purpose dispensing system provides way to switch from squeeze bottles to air-powered dispensing of adhesives, sealants, and other assembly fluids. Kit comes with air-powered dispenser, electric foot pedal, and customer-selected disposable components. To apply consistent amounts of fluid, user sets air pressure, adjusts timer, holds syringe reservoir like pen, and presses foot...
Read More »
Dispensing Tool applies small dots of thick fluids.
Model HP7x multiplies dispensing pressure by 7-to-1 ratio, so that 100 psi of input produces 700 psi of air pressure inside disposable 3 cc reservoir within unit. Pen-like device connects to 100 psi air-powered dispenser and replaces standard syringe reservoir. Small dots are achieved by using ULTRA microdot dispense tip. To dispense controlled amount of material, operator holds HP7x like pen,...
Read More »
Dispense Valve applies precise amounts of UV-cure adhesive.
Pneumatically operated Model 752V-SS has no seals or O-rings to wear out and leak. Diaphragm is rated for tens of millions of cycles. Drip-free cutoff eliminates waste. Adjustable stroke control allows flow rate to be fine tuned, while microprocessor-based VALVEMATE(TM) controller allows open time to be adjusted in increments from 0.01 to 0.001 sec. Valve is suitable for automated assembly...
Read More »
Dispensing System lowers fluid consumption.
ULTRASAVER(TM) operates on compressed air and electricity, and has timer to control amount of fluid applied. Fluid is contained in disposable barrel reservoirs fitted with precision tips and pistons that reduce waste by wiping reservoirs clean. Users can customize systems via selection of tips, barrels, and pistons for specific fluids. Applications include bonding parts with dots of adhesive,...
Read More »
Adhesive Dispense Valve makes precise deposits.
Compact MicroDot(TM) 741MD-SS needle valve makes microdeposits as small as 0.007 in. dia. Internal needle seats in hub of dispensing tip reduces amount of dead fluid between needle seat and substrate. Pneumatically operated valve applies variety of assembly fluids including UV-cure adhesives, solvents, lubricants, and epoxies. Calibration knob allows user to restore valve stroke setting and...
Read More »
Dispenser Kit eliminates adhesive-related waste.
Model 1500XL-CA tabletop dispensing unit uses microprocessor circuitry and controlled air pressure to provide control over amount of cyanoacrylate applied, allowing user to dispense same amount every time. Cyanoacrylate is contained in disposable syringe reservoir connected to dispenser console by air line. Clog-resistant, Teflon(R)-lined dispense tips provide trouble-free application. Coalescing...
Read More »
Piston Valve assures lubrication on every part.
Model 725DA-SS stainless steel, pneumatically operated piston valve applies accurate, uniform dots and stripes of grease without mess, drooling, or maintenance. It employs no seals to wear out, leak, or degrade performance. It offers clean cutoff and external stroke control. Model 725DA-SS can be used in new assembly machines, or can retrofit to existing production lines.
Read More »