Munson Machinery Company, Inc.

Utica, NY 13502

New Rotary Batch Mini Mixer Equipped with Inlet-mounted Spray Line
De-agglomerate and blend up to 5 cu ft of dry bulk ingredients. Equipped with a product inlet slide for simple of feeding from bags or boxes. Can be rolled to a cleaning station and accessed through a hinged door on the vessel side wall.
Read More »
New Rotary Mixer Blends Dry Bulk Solids with or without Liquid Additions
RCM36X9SS features stationary inlet, stationary outlet, rotating drum with smooth interior surfaces and proprietary mixing flights. Offered in diameters from 16 to 72 in. (41 to 183 cm), in lengths from 4 to 24 ft (122 to 732 cm). Applications include bulk foods such as cereals, powdered drink mixes, snack foods and pet foods and bulk chemicals.
Read More »
New HD-3.5-9-SS Model Ribbon Blender from Munson Features Integral Bag Dump Station
Models range in capacity from 1 to 1,150 cu ft (28 L to 33 m3) and can blend up to 85 cu ft (2.4 m3) of powders, pastes or slurries. Offers tight tolerances of 1/8 to 1/16 in. (3.175 to 1.587 mm) between the ribbon blades and the vessel trough minimize residual product following discharge, reducing material waste and cleaning time. Comes with 30 HP (22 kW) motor, removable safety-interlocked...
Read More »
New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »
New De-Clumper Lump Breaker Features Support Base and Infeed Hopper Design
RDC-1530-SS lump breaker is powered by a 5 HP (3.7 kW) motor with self-lubricating chain and sprocket drive. De-lumps bulk materials that are agglomerated or solidified during storage or shipment to their original particle sizes and flowability. #304 or #316 stainless steel constructed units can be finished to food, pharmaceutical or industrial standards.
Read More »
New MUNSIFTER Centrifugal Sifter Features External Bearing at Both Shaft Ends
Designed to sift, scalp and de-agglomerate bulk solid materials and offered with #304 or #316 stainless steel constructions. Driven by 3 HP motor with speed of approximately 500 RPM. Using an auger the material is fed into the horizontal screen cylinder that is propelled by rotating paddles against screen.
Read More »
New RDC-3030-SS DeClumper Lump Breaker is Equipped with Dual Independent 10 HP Motors
Designed at 279 mm high and fit in restricted spaces between bulk storage, handling, processing and packaging equipment. Constructed of #304 stainless steel, #316 stainless steel, carbon steel and abrasion-resistant steel (AR-235). Equipped with interlocked side-removal bedscreens.
Read More »
Munson Machinery Introduces RDC-2424-MS Lump Breaker That is Built to Withstand Heavy Usage
The RDC-2424-MS De-Clumper™ Rotary Lump Breaker is used for breaking chunks of agglomerated abrasive or friable materials. The breaker features AR-235 abrasion-resistant steel breaking heads and dual rotors at the square inlet (610 mm). The system comes with 25.4 mm apertures for exiting the on-size materials in the bedscreen. The bedscreens are available with apertures ranging from 25 to 64 mm...
Read More »
Latest Magnum 72-AR Screen Classifying Cutter Can Process Up to 720 cu ft/h
The Magnum™ 72-AR Screen Classifying Cutter comes with progressively stacked array of 72 interconnected, abrasion-resistant cutter tip holders. The unit is operated at speeds set from 30 to 3600 RPM depending on the applications. The cutter features bed screen perforations ranging from 102 mm to 3.18 mm in diameter and an infeed throat (1830 x 572 mm) accommodates semi-hard, fibrous or friable...
Read More »
Munson Introduces HD-510-MS Paddle Blender with High-Strength Agitator
The HD-510-MS Paddle Blender is designed for handling free- and non-free-flowing materials such as dry, moist, oily or paste-like in batches up to 200 cu-ft. The unit’s high-speed choppers add shear for breaking lumps and/or disperse dry bulk solids, pastes and slurries. The blender features a heavy-gauge, carbon steel U-shaped vessel that allows tolerances of 1.6 to 3.2 mm between outer paddle...
Read More »
New Rotary Batch Mini Mixer Equipped with Inlet-mounted Spray Line
De-agglomerate and blend up to 5 cu ft of dry bulk ingredients. Equipped with a product inlet slide for simple of feeding from bags or boxes. Can be rolled to a cleaning station and accessed through a hinged door on the vessel side wall.
Read More »
New Rotary Mixer Blends Dry Bulk Solids with or without Liquid Additions
RCM36X9SS features stationary inlet, stationary outlet, rotating drum with smooth interior surfaces and proprietary mixing flights. Offered in diameters from 16 to 72 in. (41 to 183 cm), in lengths from 4 to 24 ft (122 to 732 cm). Applications include bulk foods such as cereals, powdered drink mixes, snack foods and pet foods and bulk chemicals.
Read More »
New HD-3.5-9-SS Model Ribbon Blender from Munson Features Integral Bag Dump Station
Models range in capacity from 1 to 1,150 cu ft (28 L to 33 m3) and can blend up to 85 cu ft (2.4 m3) of powders, pastes or slurries. Offers tight tolerances of 1/8 to 1/16 in. (3.175 to 1.587 mm) between the ribbon blades and the vessel trough minimize residual product following discharge, reducing material waste and cleaning time. Comes with 30 HP (22 kW) motor, removable safety-interlocked...
Read More »
New Sanitary Rotary Batch Mixer with Internal Spray Line
Model 700-TH-40-SS available with useable batch capacity of 40 cu.ft. and total capacity of 82 cu.ft. Constructed of stainless steel finished to sanitary standards. Design eliminates the need for an internal shaft with seals contacting material.
Read More »
New De-Clumper Lump Breaker Features Support Base and Infeed Hopper Design
RDC-1530-SS lump breaker is powered by a 5 HP (3.7 kW) motor with self-lubricating chain and sprocket drive. De-lumps bulk materials that are agglomerated or solidified during storage or shipment to their original particle sizes and flowability. #304 or #316 stainless steel constructed units can be finished to food, pharmaceutical or industrial standards.
Read More »
New MUNSIFTER Centrifugal Sifter Features External Bearing at Both Shaft Ends
Designed to sift, scalp and de-agglomerate bulk solid materials and offered with #304 or #316 stainless steel constructions. Driven by 3 HP motor with speed of approximately 500 RPM. Using an auger the material is fed into the horizontal screen cylinder that is propelled by rotating paddles against screen.
Read More »
New RDC-3030-SS DeClumper Lump Breaker is Equipped with Dual Independent 10 HP Motors
Designed at 279 mm high and fit in restricted spaces between bulk storage, handling, processing and packaging equipment. Constructed of #304 stainless steel, #316 stainless steel, carbon steel and abrasion-resistant steel (AR-235). Equipped with interlocked side-removal bedscreens.
Read More »
Munson Machinery Introduces RDC-2424-MS Lump Breaker That is Built to Withstand Heavy Usage
The RDC-2424-MS De-Clumper™ Rotary Lump Breaker is used for breaking chunks of agglomerated abrasive or friable materials. The breaker features AR-235 abrasion-resistant steel breaking heads and dual rotors at the square inlet (610 mm). The system comes with 25.4 mm apertures for exiting the on-size materials in the bedscreen. The bedscreens are available with apertures ranging from 25 to 64 mm...
Read More »
Latest Magnum 72-AR Screen Classifying Cutter Can Process Up to 720 cu ft/h
The Magnum™ 72-AR Screen Classifying Cutter comes with progressively stacked array of 72 interconnected, abrasion-resistant cutter tip holders. The unit is operated at speeds set from 30 to 3600 RPM depending on the applications. The cutter features bed screen perforations ranging from 102 mm to 3.18 mm in diameter and an infeed throat (1830 x 572 mm) accommodates semi-hard, fibrous or friable...
Read More »
Munson Introduces HD-510-MS Paddle Blender with High-Strength Agitator
The HD-510-MS Paddle Blender is designed for handling free- and non-free-flowing materials such as dry, moist, oily or paste-like in batches up to 200 cu-ft. The unit’s high-speed choppers add shear for breaking lumps and/or disperse dry bulk solids, pastes and slurries. The blender features a heavy-gauge, carbon steel U-shaped vessel that allows tolerances of 1.6 to 3.2 mm between outer paddle...
Read More »