Adalet
Cleveland, OH 44135
Share:
Wireless Data Transmission System suits Division 2 areas.
Model N4ANT-D2 Explosionproof Class I, Division 2 I/O data transmission system exports data without hard wiring or conduit. It enables activities such as data collection, sensor monitoring, and process control. System, enclosed in ruggedized cast aluminum enclosure, has 600-1,000 ft range, stainless steel hardware, and 1 W transmitter power. It utilizes Frequency Hopping Spread Spectrum...
Read More »
Data Transmission System has RS-232/422/485 capabilities.
DIN-rail mountable, Division 1 Adalet Wireless XANT incorporates data transceiver that acts as master, slave, and store-and-forward repeater/slave. UL-Classified system supports data communications as well as MODBUS and Allen Bradley DF1 packet communications and can self-heal (reroute) in repeater networks. Wireless I/O system includes explosionproof, cast-aluminum enclosure that houses...
Read More »
Wireless I/O Systems feature 1 W transmitter power.
Explosion-proof Model XANT transmitter/receiver system features cast aluminum enclosure that houses transmitter and antenna. Enclosure is impact-resistant to UL requirements and includes integral wire sealing chamber. Model N4ANT is available for areas rated NEMA 4X. Systems feature FHSS technology, 4-20 mA analog signal, and 3 contact outputs rated 120 Vac at .05 A. They operate on license-free...
Read More »
Window Kits suit heavy-duty electronic enclosures.
Tempered-plate-glass window kits, offered with 304 and 316L stainless steel frames, are available for use in company's Increased Safety Terminal Enclosures (protection type e) and general-purpose NEMA Type 4, 4X, 12, and 13 enclosures. Glass window offers impact resistance. Silicone gasket provides protection against oil and water and provides dust-tight seal around perimeter of window and frame....
Read More »
Instrument Housings offer expanded viewing windows.
Series XIHMK Explosionproof Instrument Housings suit large diameter assemblies, multi-level circuit boards or wide-angle readouts and displays and have 3-9/16 in. ID. Housings are precision machined from sand-cast, copper-free aluminum, or 316 stainless steel and feature 3/4 in. NPT conduit feed-through hubs, 7/16 in. thick base for blind tapped instrument mounting holes, and 2-1/2 in. dia. glass...
Read More »Mining Couplers offer flesh tone insulator tubes.
PLM mining couplers employ KeriteÃ-® EP, flesh tone insulator tubes that make dirt, contamination, and tracking more identifiable in surface and deep mining applications where lighting is poor. Cable couplers are available for 500 A applications up to 15,000 V in 3 coupling designs: standard, aluminum threaded body; green Quick-Thread 2 Ã-½ turn joining collar; and orange Quick-Turn...
Read More »Disconnect Enclosure protects from dust, water, and oil.
Flange-mounted, stainless steel Series DN4X comes in 9 sizes ranging from 24 x 21 x 8 in. to 60 x 37 x 12 in. It includes provisions for mounting disconnect device on right flange and accepts all disconnect hardware. Enclosure is suitable for indoor and outdoor areas where dampness and highly-corrosive atmospheres are present such as refineries, waste and water treatment, food processing,...
Read More »
Explosion Proof Enclosures come with bolt-on mounting lugs.
IP66/NEMA 4 rated units are offered with bi-directional mounting lugs that permit vertical or horizontal mounting orientation. Ductile aluminum alloy lugs adapt to irregular surfaces so lug bolts can be tightened without damaging enclosure. Offered as alternative to cast on lugs, certifications include UL Standard 1203, CSA Standard C22.2 No. 30, and ATEX 0539 Ex II 2GD. Additional certifications...
Read More »Explosion Proof Pilot Lights feature screw terminals.
Screw terminals permit direct attachment of wire leads to pilot light. When used with crimp style connectors, they provide tight connection with high pull-out resistance and accept most wire gauges. All operators are Ã-¾ in. nspm in 2 barrel lengths for surface or panel mount. They are alodine coated to minimize corrosion, and are suitable for use in Class I, Groups B, C, and D hazardous gas;...
Read More »
Control Enclosures protect against accidental breakdown.
CN Series Increased Safety Control Enclosures house electrical equipment that will not generate arcs or sparks during normal operation. They also house equipment in which surface temperatures are controlled below incentive values. Able to resist impact, enclosures prevent possibility of excessive heat and ingress of water or dust. They are available in stainless steel 316L and 304 and polyester...
Read More »