Wireless I/O Systems feature 1 W transmitter power.
Press Release Summary:
Explosion-proof Model XANT transmitter/receiver system features cast aluminum enclosure that houses transmitter and antenna. Enclosure is impact-resistant to UL requirements and includes integral wire sealing chamber. Model N4ANT is available for areas rated NEMA 4X. Systems feature FHSS technology, 4-20 mA analog signal, and 3 contact outputs rated 120 Vac at .05 A. They operate on license-free 902-928 MHz ISM band with range of 600-1,000 ft.
Original Press Release:
Adalet Introduces Industry's First Explosionproof Division 1 Wireless I/O Communication System
Cleveland, OH (January 29, 2004) - Adalet is pleased to announce the XANT explosionproof wireless I/O transmitter / receiver system. This Patent Pending wireless I/O system features a cast aluminum enclosure designed to house a transmitter and antenna. A receiver and antenna is included loose with the packaged system. The ruggedized, cast aluminum enclosure is impact resistant to UL requirements and includes an integral wire sealing chamber, eliminating the need for a field installed poured sealing fitting.
A second model, the N4ANT is also available for any industrial or general purpose areas rated NEMA 4X where ruggedized protection is important. Both models provide a wireless solution thus reducing installation labor costs and eliminating the need for conduit and wires in hazardous or other industrial locations.
Both Patent Pending systems come complete with a transmitter and antenna enclosed in an Adalet cast aluminum enclosure and a receiver unit and antenna which can be housed in any of Adalet's stainless steel or fiberglass enclosures. Contact Adalet to build an enclosure system to house the receiver and antenna.
Features:
o 1 Watt transmitter power
o Analog signal 4-20mA
o Three contact outputs rated at 120VAC @ .05 amps
o Range: 600-1000 feet with obstructed line of sight
o Frequency Hopping Spread Spectrum technology (Interference free operation)
o License free 902-928 MHz ISM band
o 17.5mm wide DIN-rail mounted transmitter and receiver
o Safety blue powder coating for hazloc applications and ANSI grey for NEMA 4X applications
o Stainless steel hardware
o Optional ¾" NPT factory sealed hub for dc power supply and analog signal communications
o Two ¾" NPT hub and standard third conduit entry accommodates up to 1" NPT
o PATENT PENDING
Applications:
o Tank level
o PLC / RTU extensions
o Pump control
o Waste / wastewater
o Oil & gas
o Petrochemical
o Mills / quarries / factories
o Sensor monitoring
o Utilities
o Irrigation systems
AREAS OF USE
Division 1 & 2 Classified Areas-U.S., *Canada
o Class I, Division 1, Groups B, C, D
o Class II, Groups E, F, G
o Class III
*Zone 1 & 2 Classified Areas-U.S., Canada, International
*ATEX-EU Directive 94/9/EC-Europe
Equipment Group II G&D
Equipment Category 2
* - Approval pending
APPLICABLE DESIGN STANDARDS
o UL Standard 1203
o CSA Standard C22.2 No. 30
o ATEX: II 2GD Exd IIB + H2
o NEMA 4X, 7BCD, 9EFG
o IEC Exd IIB + H2, IEC 60529: IP66
Europe: EN50014 & EN50018
International: IEC 60079-0 & IEC 60079-1
Canada: CSA-E79-0 & CSA-E79-1
U.S.: ANSI/UL60079-0, ANSI/UL60079-1
ADALET, A Scott Fetzer Company (a subsidiary of Berkshire Hathaway), is a leading manufacturer of electrical enclosure systems and cable accessories, offering custom modification as well as standard products for more than 70 years. The company holds certification under ISO-9001 International Standards for Quality Management. Adalet markets a broad line of industrial and explosionproof enclosure systems ranging from junction boxes, control stations, meter housings, power panels, and motor control to pilot devices, operators, fittings, and other accessories.
For more information contact: Adalet, 4801 West 150th Street, Cleveland, Ohio, 44135, USA Tel: 216-267-9000 Fax: 216-267-1681 Email: info@adalet.com Website: www.adalet.com
