EGS Electrical Group
Rosemont, IL 60018
Share:
Light Fixtures help facilities meet federal regulations.
Utilizing high-pressure sodium lamps and pulse-start metal halide ballasts, Areamaster(TM) commercial and industrial floodlights accommodate federal regulations banning installation of mercury vapor lamps and probe-start 150-500 W metal halide lighting ballasts. Units feature one-piece pressure-clad housing machined from copper-free aluminum, and bronze polyester finish for resistance to...
Read More »Outlet Boxes and Covers help identify fire alarm circuits.
Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 Ã-½ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without...
Read More »Electrical Connectors withstand harsh applications.
Protected from water, dust, oil, grease, fumes, and other hostile contaminants, liquidtight ST Series is available pre-assembled with integrated KO sealing ring. Cable and conduit connectors are made from bar stock steel or malleable iron with small turning radius for installation in tight spaces. Offered in 3/8-5 in. sizes in straight, 45Ã-
Read More »Inline GFCI ensures safe power delivery at jobsite.
McGill Tri-Tap solves lack of readily available electrical power at jobsites by providing three 15 A, 120 Vac receptacles into which contractors can safely plug in their power tools. Portable unit features 2 ft SJT 12/3 AWG cable with molded NEMA 5-15 plug on line side and attached power block with receptacles on load side. Unit has 4-6 mA trip level and response time of less than .025 sec if it...
Read More »Conduit Bodies come with epoxy-free, uncoated finish.
Available in 7 configurations ranging from Ã-½-4 in. trade sizes, Model FM9(TM) conduit bodies are forged from copper-free aluminum for lightweight mounting and corrosion resistance. Suited for Class I, Division 2 applications, products feature wiring cavity along with domed cover, and use stainless steel pan-head cover screws. They help electricians tackle wide range of jobs encountered when...
Read More »Compact Switched Receptacles suit adverse locations.
Available in 30 and 60 A models, NEMA 4X-rated ASR series has compact design with moveable mounting feet that allow for installation on irregular surfaces. Internal mounting tubes are also available for secure mounting in tight spots. Corrosion-resistant ValoxÃ-® housing can be fitted with removable Class J fuses, and bottom-mounted, internal hinges are hidden to eliminate sanitation...
Read More »Luminaire offers non-glare lighting in hazardous locations.
Engineered to meet Class I, Division 2 hazardous location requirements, Wallmaster(TM) I/2 wall pack luminaire features enclosed and gasketed design that inhibits explosive vapors from entering. AlzakÃ-® finished aluminum reflector provides out and down light across wide area, while prismatic refractor delivers soft light with even distribution. Able to mount directly to any flat surface,...
Read More »Conduit Bodies/Covers/Gaskets enable flexible installation.
UL-Classified to interchange with equivalent Crouse-Hinds Form 7Ã-® parts, FM7(TM) Series products have bodies with corrosion-fighting epoxy powder coat. They are available in Grayloy iron, malleable iron, or aluminum, with Wedge-Lok(TM) clip covers. Flat back design allows for secure mounting and wiring room. Able to connect and change direction of conduit runs, conduit bodies also serve as...
Read More »Hand Lamps withstand industrial and construction use.
McGill 5000-SRG incandescent handlamps combine impact-resistant, thermoplastic handle with zinc-plated, 10-gauge steel cage. With easy-open design that facilitates relamping, NO-ROL cage enables portable lighting solution to be positioned on any level surface to deliver task lighting in specific area. Handle features Levolier switch that provides on/off functionality, while thumb guard protects...
Read More »Panelboard suits explosion-proof and NEMA 4X applications.
Featuring neoprene O-ring gasket, ALPN Distribution Panelboard is explosion-proof, dust-ignition proof, watertight, and corrosion resistant. Unit has copper-free aluminum body and cover with precision-machined flame paths, breaker operators, copper bus bars, and Quad-Lead stainless steel cover bolts. Suited for hazardous locations, panelboard serves as centrally controlled switching system for...
Read More »EGS Electrical Group Announces Several Promotions
ROSEMONT, IL, November 10, 2010 -- EGS Electrical Group, a division of Emerson Industrial Automation, announced today several employee promotions: Jean-Baptiste Trolle has been promoted to the position of Vice President, Marketing and Business Development of the ECM business segment. Mr. Trolle has been with the EGS organization since its acquisition of ATX in 1998 serving the company in various...
Read More »Light Fixtures help facilities meet federal regulations.
Utilizing high-pressure sodium lamps and pulse-start metal halide ballasts, Areamaster(TM) commercial and industrial floodlights accommodate federal regulations banning installation of mercury vapor lamps and probe-start 150-500 W metal halide lighting ballasts. Units feature one-piece pressure-clad housing machined from copper-free aluminum, and bronze polyester finish for resistance to...
Read More »Outlet Boxes and Covers help identify fire alarm circuits.
Made of red, epoxy powder-coated steel, fire and safety Outlet Boxes, Extension Rings, and Covers eliminate need for painting at job site. Boxes come in 4 in. and 4 11/16 in. square sizes, measuring 1 Ã-½ in. and 2 1/8 in. deep, with welded or drawn construction to meet needs of commercial applications. Groundskeeper(TM) raised boss enables 3/8 in. ground screw to be threaded into box without...
Read More »Electrical Connectors withstand harsh applications.
Protected from water, dust, oil, grease, fumes, and other hostile contaminants, liquidtight ST Series is available pre-assembled with integrated KO sealing ring. Cable and conduit connectors are made from bar stock steel or malleable iron with small turning radius for installation in tight spaces. Offered in 3/8-5 in. sizes in straight, 45Ã-
Read More »Inline GFCI ensures safe power delivery at jobsite.
McGill Tri-Tap solves lack of readily available electrical power at jobsites by providing three 15 A, 120 Vac receptacles into which contractors can safely plug in their power tools. Portable unit features 2 ft SJT 12/3 AWG cable with molded NEMA 5-15 plug on line side and attached power block with receptacles on load side. Unit has 4-6 mA trip level and response time of less than .025 sec if it...
Read More »Conduit Bodies come with epoxy-free, uncoated finish.
Available in 7 configurations ranging from Ã-½-4 in. trade sizes, Model FM9(TM) conduit bodies are forged from copper-free aluminum for lightweight mounting and corrosion resistance. Suited for Class I, Division 2 applications, products feature wiring cavity along with domed cover, and use stainless steel pan-head cover screws. They help electricians tackle wide range of jobs encountered when...
Read More »Compact Switched Receptacles suit adverse locations.
Available in 30 and 60 A models, NEMA 4X-rated ASR series has compact design with moveable mounting feet that allow for installation on irregular surfaces. Internal mounting tubes are also available for secure mounting in tight spots. Corrosion-resistant ValoxÃ-® housing can be fitted with removable Class J fuses, and bottom-mounted, internal hinges are hidden to eliminate sanitation...
Read More »Luminaire offers non-glare lighting in hazardous locations.
Engineered to meet Class I, Division 2 hazardous location requirements, Wallmaster(TM) I/2 wall pack luminaire features enclosed and gasketed design that inhibits explosive vapors from entering. AlzakÃ-® finished aluminum reflector provides out and down light across wide area, while prismatic refractor delivers soft light with even distribution. Able to mount directly to any flat surface,...
Read More »Conduit Bodies/Covers/Gaskets enable flexible installation.
UL-Classified to interchange with equivalent Crouse-Hinds Form 7Ã-® parts, FM7(TM) Series products have bodies with corrosion-fighting epoxy powder coat. They are available in Grayloy iron, malleable iron, or aluminum, with Wedge-Lok(TM) clip covers. Flat back design allows for secure mounting and wiring room. Able to connect and change direction of conduit runs, conduit bodies also serve as...
Read More »Hand Lamps withstand industrial and construction use.
McGill 5000-SRG incandescent handlamps combine impact-resistant, thermoplastic handle with zinc-plated, 10-gauge steel cage. With easy-open design that facilitates relamping, NO-ROL cage enables portable lighting solution to be positioned on any level surface to deliver task lighting in specific area. Handle features Levolier switch that provides on/off functionality, while thumb guard protects...
Read More »