Novotechnik U.S., Inc.
Southborough, MA 01772
Rotary Magnetic Encoders measure from 0-360 degrees.
Supplied in 30 x 50 mm housing, Vert-X 51 Series features 12-, 14-, or 16-bit resolution with repeatability to 0.36Ã-
Read More »
Non-Contact Rotary Position Sensor consumes 300 -µA at 3.3 V.
Operating from 1.8–5.5 V supply, Contelec Vert-X 21 LP Series can be ordered as 3-wire angle sensor or programmable version with up to 2 switch outputs, custom measurement angle, start- and end-point settings, custom characteristic curve and/or sense of rotation. Products offer 0Ã-
Read More »
Multi-Turn Rotary Sensors use magneto-resistive technology.
RSM 2800 Series supplies absolute position values and rotational counts up to 16 turns without mechanical gearing, batteries, or optics. Non-contact sensors permanently store shaft rotation as well as position when power is lost. When power is restored, units automatically provide accurate position and count. Measuring 30 mm in dia with 6 mm dia shaft, sensors offer independent linearity up to...
Read More »
Rotary Sensors measure just 13 x 20 mm.
Based on vertical Hall technology, Series RSC 1300 features cross structure that is affixed to silicon chip to provide 360Ã-
Read More »Non-Contacting Rotary Sensors have no moving parts.
Available with 2 voltage options, RFC rotary sensors are sealed to protection class IP 69. Magnetic assembly affixed to shaft is physically separated from sensors with embedded IC that provides analog output representing calculated angle range from 30-360Ã-
Read More »
Rotary Position Sensors offer 12-bit resolution.
Non-contact Series RSC3700 provides 360Ã-
Read More »
Transducers suit hydraulic and pneumatic applications.
Non-contacting Series TMI is designed for continuous use at operating pressures up to 350 bar. Utilizing NovostrictiveÃ-® measuring process, units provide direct, precise, and absolute measurements from 100-4,500 mm with single or multiple position markers. In addition to standard analog, SSI, and Start/Stop interfaces, TMI series features DyMoS serial interface to combine output data...
Read More »
Position Transducers utilize inductive-resistive technology.
Series TLI non-contacting transducers are integrated directly into hydraulic and pneumatic cylinders. Indres technology ensures proper operation in presence of static magnetic fields and dynamic and static electric fields. Sealed to IP67, units withstand temperature from -40 to +105Ã-
Read More »
Position Sensor comes in captive slide version.
TLM Series magnetostrictive captive slide marker incorporates ball coupling to create physical link with moving part. Technology uses ASIC to provide signal conditioning and linearization for absolute linearity of greater than Ã-
Read More »
Rotary Magnetic Encoders measure from 0-360 degrees.
Supplied in 30 x 50 mm housing, Vert-X 51 Series features 12-, 14-, or 16-bit resolution with repeatability to 0.36Ã-
Read More »
Non-Contact Rotary Position Sensor consumes 300 -µA at 3.3 V.
Operating from 1.8–5.5 V supply, Contelec Vert-X 21 LP Series can be ordered as 3-wire angle sensor or programmable version with up to 2 switch outputs, custom measurement angle, start- and end-point settings, custom characteristic curve and/or sense of rotation. Products offer 0Ã-
Read More »
Multi-Turn Rotary Sensors use magneto-resistive technology.
RSM 2800 Series supplies absolute position values and rotational counts up to 16 turns without mechanical gearing, batteries, or optics. Non-contact sensors permanently store shaft rotation as well as position when power is lost. When power is restored, units automatically provide accurate position and count. Measuring 30 mm in dia with 6 mm dia shaft, sensors offer independent linearity up to...
Read More »
Rotary Sensors measure just 13 x 20 mm.
Based on vertical Hall technology, Series RSC 1300 features cross structure that is affixed to silicon chip to provide 360Ã-
Read More »Non-Contacting Rotary Sensors have no moving parts.
Available with 2 voltage options, RFC rotary sensors are sealed to protection class IP 69. Magnetic assembly affixed to shaft is physically separated from sensors with embedded IC that provides analog output representing calculated angle range from 30-360Ã-
Read More »
Rotary Position Sensors offer 12-bit resolution.
Non-contact Series RSC3700 provides 360Ã-
Read More »
Transducers suit hydraulic and pneumatic applications.
Non-contacting Series TMI is designed for continuous use at operating pressures up to 350 bar. Utilizing NovostrictiveÃ-® measuring process, units provide direct, precise, and absolute measurements from 100-4,500 mm with single or multiple position markers. In addition to standard analog, SSI, and Start/Stop interfaces, TMI series features DyMoS serial interface to combine output data...
Read More »
Position Transducers utilize inductive-resistive technology.
Series TLI non-contacting transducers are integrated directly into hydraulic and pneumatic cylinders. Indres technology ensures proper operation in presence of static magnetic fields and dynamic and static electric fields. Sealed to IP67, units withstand temperature from -40 to +105Ã-
Read More »
Position Sensor comes in captive slide version.
TLM Series magnetostrictive captive slide marker incorporates ball coupling to create physical link with moving part. Technology uses ASIC to provide signal conditioning and linearization for absolute linearity of greater than Ã-
Read More »