Prime Measurement Products, LLC
City Of Industry, CA 91745
Share:
Differential Pressure Indicator features rupture-proof bellows.
Model 232C DP Indicator is actuated by dual liquid-filled bellows with integral temperature-compensation feature. It exhibits accuracy of Ã-
Read More »
Transmitters/Controllers offer on-line calibration adjustments.
Series B30 Transmitters and B40 Transmitters-Controllers provide measurement and control of differential pressure, absolute pressure, gauge pressure, and saturated steam flow. Non-conductive and conductive liquids at high viscosities can be accommodated. Units feature remote options, rotatable NEMA 4X/6P housing and rotatable smart display, and built-in PID controller. They have Hastelloy-C...
Read More »
Pressure Switches have safe working pressures to 10,000 psi
Pressure Switches measure differential pressure, flow rate, and liquid level. They have safe working pressures to 10,000 psi with absolute, zero-center, and split ranges. Units are 6 in. in diameter. Switch indicator is actuated by rupture-proof bellows differential pressure unit with integral temperature compensation. Single bellows units suit low-pressure air or gas applications with DP of 1...
Read More »
Transmitters communicate in HART and Fuji protocols.
Intrinsically safe, explosion-proof Series FCX electronic transmitters measure, display, alarm, and output level, pressure, and/or flow data. Type All includes gage, absolute, differential pressure, flanged level, and remote seal models. Type Alle includes gage and differential pressure models. Accuracy is Ã-
Read More »
Pressure Transmitters are TUV-certified for safety.
Series B45 absolute, differential, and gauge pressure instruments are certified for high availability and safety service. They have hardware and software redundancy, comprehensive self-checking system, and primary and secondary current sources to ensure safe fault indication if failure occurs. These features allow single B45 unit to be installed where two conventional transmitters are usually...
Read More »
Pressure Sensors provide accuracies to -
DataScanÃ-® Model DS10/DS11 Measurement/Telemetry System measures pressure, differential pressure, and level. Battery-powered DS20 Tank Level/Pressure Indicator-Transmitter measures pressure and level. Model DS30 Blind DP & Pressure Transmitter measures pressure, differential pressure, and level. Model DS40/41 Measurement/Telemetry System accepts analog and contact closure inputs and includes...
Read More »
Liquid, Gas, and Steam Flowmeters contain no moving parts.
Vortex flowmeters operate on principles of vortex shedding and ultrasonic sensing. Insertion and in-line types offer drift-free performance and withstand over-ranging without damage. Suited for applications where gas flows contains moisture or particulates, in-line liquid flowmeters suit pipes with 1/2 to 4 in. dia. Retractable insertion-type and wafer-type flowmeters measure liquid flow rates of...
Read More »Flow Instruments can work without external power.
Compact AccessÃ-® Series includes BA200 rate totalizer, BA212 heat calculator, and intrinsically safe BA214 batch controller. Suitable for remote locations, models include battery, loop, and dc powered versions. All models interface with turbine, positive-displacement, and paddlewheel flowmeters, making them suitable for pipeline and irrigation applications. Each has large LCD, front panel...
Read More »
Indicators are actuated by single or dual bellow.
Indicators are used for measurement of differential pressure, flow rate, and liquid level. Dial sizes include 3, 3 1/2, 4 1/2, and 6 in. Pointer traverses 270 deg arc and is driven by precision-jeweled rotary movement that multiplies rotation of torque tube through gear and pinion to pointer. Zero/range adjustments can be made without removing scale plate or pointer. Certain models have NEMA...
Read More »
Level Monitor displays level and contents.
Loop-Powered BA220 accepts 4-20 mA signal from level sensors, including pressure transmitters, ultrasonic sensors and capacitance probes. It has 7-digit LCD display with programmable offset to account for contents remaining in tank when measurement level is 0%. Accuracy is 0.5% of full scale. Non-linearity correction table allows the monitor to be programmed to fit most vessels, including...
Read More »
Differential Pressure Indicator features rupture-proof bellows.
Model 232C DP Indicator is actuated by dual liquid-filled bellows with integral temperature-compensation feature. It exhibits accuracy of Ã-
Read More »
Transmitters/Controllers offer on-line calibration adjustments.
Series B30 Transmitters and B40 Transmitters-Controllers provide measurement and control of differential pressure, absolute pressure, gauge pressure, and saturated steam flow. Non-conductive and conductive liquids at high viscosities can be accommodated. Units feature remote options, rotatable NEMA 4X/6P housing and rotatable smart display, and built-in PID controller. They have Hastelloy-C...
Read More »
Pressure Switches have safe working pressures to 10,000 psi
Pressure Switches measure differential pressure, flow rate, and liquid level. They have safe working pressures to 10,000 psi with absolute, zero-center, and split ranges. Units are 6 in. in diameter. Switch indicator is actuated by rupture-proof bellows differential pressure unit with integral temperature compensation. Single bellows units suit low-pressure air or gas applications with DP of 1...
Read More »
Transmitters communicate in HART and Fuji protocols.
Intrinsically safe, explosion-proof Series FCX electronic transmitters measure, display, alarm, and output level, pressure, and/or flow data. Type All includes gage, absolute, differential pressure, flanged level, and remote seal models. Type Alle includes gage and differential pressure models. Accuracy is Ã-
Read More »
Pressure Transmitters are TUV-certified for safety.
Series B45 absolute, differential, and gauge pressure instruments are certified for high availability and safety service. They have hardware and software redundancy, comprehensive self-checking system, and primary and secondary current sources to ensure safe fault indication if failure occurs. These features allow single B45 unit to be installed where two conventional transmitters are usually...
Read More »
Pressure Sensors provide accuracies to -
DataScanÃ-® Model DS10/DS11 Measurement/Telemetry System measures pressure, differential pressure, and level. Battery-powered DS20 Tank Level/Pressure Indicator-Transmitter measures pressure and level. Model DS30 Blind DP & Pressure Transmitter measures pressure, differential pressure, and level. Model DS40/41 Measurement/Telemetry System accepts analog and contact closure inputs and includes...
Read More »
Liquid, Gas, and Steam Flowmeters contain no moving parts.
Vortex flowmeters operate on principles of vortex shedding and ultrasonic sensing. Insertion and in-line types offer drift-free performance and withstand over-ranging without damage. Suited for applications where gas flows contains moisture or particulates, in-line liquid flowmeters suit pipes with 1/2 to 4 in. dia. Retractable insertion-type and wafer-type flowmeters measure liquid flow rates of...
Read More »Flow Instruments can work without external power.
Compact AccessÃ-® Series includes BA200 rate totalizer, BA212 heat calculator, and intrinsically safe BA214 batch controller. Suitable for remote locations, models include battery, loop, and dc powered versions. All models interface with turbine, positive-displacement, and paddlewheel flowmeters, making them suitable for pipeline and irrigation applications. Each has large LCD, front panel...
Read More »
Indicators are actuated by single or dual bellow.
Indicators are used for measurement of differential pressure, flow rate, and liquid level. Dial sizes include 3, 3 1/2, 4 1/2, and 6 in. Pointer traverses 270 deg arc and is driven by precision-jeweled rotary movement that multiplies rotation of torque tube through gear and pinion to pointer. Zero/range adjustments can be made without removing scale plate or pointer. Certain models have NEMA...
Read More »
Level Monitor displays level and contents.
Loop-Powered BA220 accepts 4-20 mA signal from level sensors, including pressure transmitters, ultrasonic sensors and capacitance probes. It has 7-digit LCD display with programmable offset to account for contents remaining in tank when measurement level is 0%. Accuracy is 0.5% of full scale. Non-linearity correction table allows the monitor to be programmed to fit most vessels, including...
Read More »