Turck, Inc.
Plymouth, MN 55441
Dual Sensor detects short and long stroke C-groove cylinders.
Measuring 2.9 x 4.6 x 18 mm, Model BIM-UNR combines 2 sensors through 1 cable connection. Magnetic position sensor mounts within C-groove cylinders with no accessories required, and has built-in tab that keeps it in place to facilitate one-hand mounting. As mounting screw is located near cable exit, sensor remains fastened even if cable is pulled. Model BIM-UNR delivers EMC immunity and is suited...
Read More »
Ethernet PROFIBUS® Device Coupler helps monitor networks.
Combining web server software with diagnostic functionality, Model PB-XEPI enables users to monitor PROFIBUS networks remotely through web browser, without disrupting network operations. Coupler can identify malfunctions in network and send error message via e-mail that includes link to device. Users can then view detailed information about malfunction and recommended procedures to fix it. Using...
Read More »Pressure Sensors target intrinsically safe locations.
Utilizing media-isolated stainless steel diaphragm, PT4400 Series is suited for pneumatics, water management, hydraulic systems, oil and gas, HVAC/R, and industrial OEM equipment. Units are manufactured using MEMS technology with one-piece sensing design. Constructed without O-rings, sensors allow pressure ranges up to 10,000 psi and burst pressures up to 20,000 psi. They are rated for UL/cUL 913...
Read More »
Pressure Sensor provides switch point detection.
PK pressure sensors provide pneumatic pressure ranges of -29.5 to 0 in. Hg and 0 to 145 psi, with 3 percent accuracy, and are available in two body styles, pico and nano, to support various mounting options. Programmed through push buttons, sensor menu may be inverted for programming flexibility. Features include 2 PNP switch points and integrated M8 connector. Compact sensors are IP 65 rated and...
Read More »Field-Wireable Connectors are available with up to 12 pins.
Providing IP67 protection, 7/8-16UN minifast-® field wireable line is offered in 6-, 7-, and 8-pin options in 1 in. thread connector as well as 9-, 10-, and 12-pin units in 1 1/8 in. connector. Connectors are designed to handle up to 18 mm cable diameters, accommodate 14 AWG conductors, and are rated for up to 8 A at 600 Vac/Vdc. They are available in male or female configurations for use with...
Read More »Dual-Wire DC Sensors incorporate Factor 1 technology.
Used by machine engineers, 2-wire Uprox-®+ sensors feature quick-disconnect capabilities and Uprox+ technology. Latter provides extended sensing ranges for all metal types and features integrated pre-damping protection function that reduces metal-free mounting area in applications. Able to be connected to existing cable network, products are weld field immune and available with Teflon-® or...
Read More »Gateways handle EtherNet/IP and Modbus TCP protocols.
BL20 gateways may be controlled by PLC or set up as separate system while using centralized server to monitor operations. System consists of gateway, base modules, and electronic modules. I/O modules are configured independent of fieldbus protocol, and up to 74 I/O modules may be connected to a system. I/Oassistant software is included to configure engineering, parameter set-up, documentation,...
Read More »
Power Connectors provide up to 15 A of current.
Featuring molded body, 3- and 4-pin M16 powerfast connectors are rated for 600 Vac/Vdc. Cordsets are available with tray rated, exposed run PVC flexlife-® cable. Suited for conveyor, small motor, and material handling applications, products provide IEC IP67 protection and offer male or female, straight connectors, standard and custom lengths, and pigtails or extensions. All feature fully...
Read More »Magnetic Flow Meters have non-obstructive design.
Accurate to 2% of determined value, FCMI series uses magnetic inductive principle to measure electrically conductive fluid flow rates from 0-9.9 gpm. Solid-state design will not obstruct flow of media to obtain measurement. Areas of potential use include water treatment, steel, machine engineering, chemical, pharmaceutical, and energy industries.
Read More »
TURCK AIM and JBBS Junction Boxes Now IP 69K
Minneapolis, Minn. - TURCK announces that its line of Advanced I/O Modules (AIM) and metallic JBBS junction boxes are now rated for IP 69K environmental protection. Extensive testing by an independent environmental test lab proved that AIM and JBBS junction boxes can withstand hot steam jet cleaning per EN 60529 and DIN 40050-9. Now the AIM and metallic JBBS junction boxes can handle harsh...
Read More »Turck Reference Guide Provides One-Stop-Shop for Intrinsically Safe Products
Minneapolis, Minn. - May 7, 2010 - TURCK announces its new Interface and Intrinsic Safety Quick Reference Guide, providing an overview of the company's intrinsically safe products, including switching amplifiers, analog I/O, solenoid drivers, rotational speed monitors, and relay and power supplies. The guide also features new intrinsically safe models, such as FDT/DTM amplifiers that can be...
Read More »
Dual Sensor detects short and long stroke C-groove cylinders.
Measuring 2.9 x 4.6 x 18 mm, Model BIM-UNR combines 2 sensors through 1 cable connection. Magnetic position sensor mounts within C-groove cylinders with no accessories required, and has built-in tab that keeps it in place to facilitate one-hand mounting. As mounting screw is located near cable exit, sensor remains fastened even if cable is pulled. Model BIM-UNR delivers EMC immunity and is suited...
Read More »
Ethernet PROFIBUS® Device Coupler helps monitor networks.
Combining web server software with diagnostic functionality, Model PB-XEPI enables users to monitor PROFIBUS networks remotely through web browser, without disrupting network operations. Coupler can identify malfunctions in network and send error message via e-mail that includes link to device. Users can then view detailed information about malfunction and recommended procedures to fix it. Using...
Read More »Pressure Sensors target intrinsically safe locations.
Utilizing media-isolated stainless steel diaphragm, PT4400 Series is suited for pneumatics, water management, hydraulic systems, oil and gas, HVAC/R, and industrial OEM equipment. Units are manufactured using MEMS technology with one-piece sensing design. Constructed without O-rings, sensors allow pressure ranges up to 10,000 psi and burst pressures up to 20,000 psi. They are rated for UL/cUL 913...
Read More »Turck's New Welding Solutions Catalog Features Rugged Product Line for Harsh Environments
Minneapolis, Minn. - TURCK announces its new Welding Solutions catalog, specifically designed for customers who use sensors and connectivity products in welding environments. The new Welding Solutions catalog details TURCK's complete line of sensors, cordsets and accessories able to withstand the abrasion, physical impact, weld slag, splatter and high temperature environments created by...
Read More »
Pressure Sensor provides switch point detection.
PK pressure sensors provide pneumatic pressure ranges of -29.5 to 0 in. Hg and 0 to 145 psi, with 3 percent accuracy, and are available in two body styles, pico and nano, to support various mounting options. Programmed through push buttons, sensor menu may be inverted for programming flexibility. Features include 2 PNP switch points and integrated M8 connector. Compact sensors are IP 65 rated and...
Read More »Field-Wireable Connectors are available with up to 12 pins.
Providing IP67 protection, 7/8-16UN minifast-® field wireable line is offered in 6-, 7-, and 8-pin options in 1 in. thread connector as well as 9-, 10-, and 12-pin units in 1 1/8 in. connector. Connectors are designed to handle up to 18 mm cable diameters, accommodate 14 AWG conductors, and are rated for up to 8 A at 600 Vac/Vdc. They are available in male or female configurations for use with...
Read More »Dual-Wire DC Sensors incorporate Factor 1 technology.
Used by machine engineers, 2-wire Uprox-®+ sensors feature quick-disconnect capabilities and Uprox+ technology. Latter provides extended sensing ranges for all metal types and features integrated pre-damping protection function that reduces metal-free mounting area in applications. Able to be connected to existing cable network, products are weld field immune and available with Teflon-® or...
Read More »New Networks/Fieldbus Overview Guide from Turk
Minneapolis, Minn. - TURCK introduces the new Networks/Fieldbus Overview Guide, the first in its series of overview guides to better assist customers in understanding fieldbus networks. The Overview Guide contains system descriptions for FOUNDATION(TM) fieldbus, DeviceNet(TM), AS-interface-®, PROFIBUS-® and Ethernet networks, along with detailed data and network diagrams. This guide also...
Read More »Gateways handle EtherNet/IP and Modbus TCP protocols.
BL20 gateways may be controlled by PLC or set up as separate system while using centralized server to monitor operations. System consists of gateway, base modules, and electronic modules. I/O modules are configured independent of fieldbus protocol, and up to 74 I/O modules may be connected to a system. I/Oassistant software is included to configure engineering, parameter set-up, documentation,...
Read More »