Flowline
Los Alamitos, CA 90720
Level Transmitters are available in SS or titanium.
DeltaSpan LD10 and DeltaRange LD20 differential pressure level transmitters are unaffected by fumes, vapors, or other hazards located on liquid surface. Differential pressure ranges are 0-7.5, 0-15, and 0-30 psi for LD10, while LD20 can be obtained in 0-2.5, 0-5, 0-10, and 0-15 psi. Transmitters have polyurethane or Tefzel-® cabling, making them submersible to NEMA 6/IP68. Each transmitter has...
Read More »
Level Transmitter provides accurate liquid measurement.
Ultrasonic LA12 Cricket(TM) 2-wire transmitter mounts through top wall of tank and provides continuous liquid measurement from 0.3 to 10 ft. It has automatic temperature compensation over entire range, NEMA 4X IP65 enclosure with -½ in. conduit connector, 4-20 mA output, and LED power-status indicator. Acoustic wave guide, available in PP, PVC or PVDF, reduces measurement space to -½ in. while...
Read More »
Flow Switch offers response time of 1 to 10 seconds.
GT10 Thermo-Flo(TM) Gas Flow Switch provides flow detection and switching from 1 to 90 fps. Setpoint can be changed with single-turn of adjustment knob, which doubles as LED indicator for flow/no-flow status indication. Short version probe is for use in ducting from 1/2 to 1 1/2 in., while longer version is applied from 2 in. up. All-plastic sensor construction is either PP/Ryton(R) or PVDF...
Read More »
Level Switch interfaces with remote devices.
LV10 Vertical Buoyancy Level Switch consists of float, magnet, reed switch, and baffle body which dampens turbulence and eliminates effects of switch chatter. It is designed for vertical installation inside tank with clean, non-coating, or scaling type liquids. Reed output provides switch interface with PLC, SCADA, or alarms. All-plastic construction features PP or optional PVDF wetted material....
Read More »
Liquid Flow Switch has PP/Rytron® or PVDC construction.
Model FT10 Thermo-Flo(TM) offers adjustable switch setpoints from 0.04 to 3 fps. LED indicates flow or no-flow status, and relay or FET output provides secure interface with remote devices. Two probe lengths, one for pipe sizes from 1/2 to 1 1/2 in., and one for 2 in. and up, are available. Thermal dispersion flow switch measures liquid temperature to determine changes in flow velocity, and is...
Read More »
Wireless Level Transmitter may be remotely calibrated.
Model LN20 EchoNet(TM) wireless, ultrasonic level transmitter monitors and transmits inventory updates via Internet to TankLink data and alarm management service. Suitable for customer interface, analysis, and processing, transmitter features non-contact level sensing from 0.5 to 14 ft. with accuracy to +/- 0.25%. LN20 offers encrypted digital communication, field replaceable lithium-ion battery,...
Read More »
Level Switch uses tuning fork sensor.
LZ10 Tuning Fork Level Switch vibrates at nominal frequency of 400 Hz. As switch becomes immersed in liquid or slurry, corresponding frequency shift occurs. When measured frequency shift reaches setpoint value, switch changes state indicating presence of liquid or solid medium. It is suitable for liquid applications with light to medium coating or scaling-type characteristics, or lightweight...
Read More »
Level Transmitters are available in SS or titanium.
DeltaSpan LD10 and DeltaRange LD20 differential pressure level transmitters are unaffected by fumes, vapors, or other hazards located on liquid surface. Differential pressure ranges are 0-7.5, 0-15, and 0-30 psi for LD10, while LD20 can be obtained in 0-2.5, 0-5, 0-10, and 0-15 psi. Transmitters have polyurethane or Tefzel-® cabling, making them submersible to NEMA 6/IP68. Each transmitter has...
Read More »
Level Transmitter provides accurate liquid measurement.
Ultrasonic LA12 Cricket(TM) 2-wire transmitter mounts through top wall of tank and provides continuous liquid measurement from 0.3 to 10 ft. It has automatic temperature compensation over entire range, NEMA 4X IP65 enclosure with -½ in. conduit connector, 4-20 mA output, and LED power-status indicator. Acoustic wave guide, available in PP, PVC or PVDF, reduces measurement space to -½ in. while...
Read More »
Flow Switch offers response time of 1 to 10 seconds.
GT10 Thermo-Flo(TM) Gas Flow Switch provides flow detection and switching from 1 to 90 fps. Setpoint can be changed with single-turn of adjustment knob, which doubles as LED indicator for flow/no-flow status indication. Short version probe is for use in ducting from 1/2 to 1 1/2 in., while longer version is applied from 2 in. up. All-plastic sensor construction is either PP/Ryton(R) or PVDF...
Read More »
Level Switch interfaces with remote devices.
LV10 Vertical Buoyancy Level Switch consists of float, magnet, reed switch, and baffle body which dampens turbulence and eliminates effects of switch chatter. It is designed for vertical installation inside tank with clean, non-coating, or scaling type liquids. Reed output provides switch interface with PLC, SCADA, or alarms. All-plastic construction features PP or optional PVDF wetted material....
Read More »
Liquid Flow Switch has PP/Rytron® or PVDC construction.
Model FT10 Thermo-Flo(TM) offers adjustable switch setpoints from 0.04 to 3 fps. LED indicates flow or no-flow status, and relay or FET output provides secure interface with remote devices. Two probe lengths, one for pipe sizes from 1/2 to 1 1/2 in., and one for 2 in. and up, are available. Thermal dispersion flow switch measures liquid temperature to determine changes in flow velocity, and is...
Read More »
Wireless Level Transmitter may be remotely calibrated.
Model LN20 EchoNet(TM) wireless, ultrasonic level transmitter monitors and transmits inventory updates via Internet to TankLink data and alarm management service. Suitable for customer interface, analysis, and processing, transmitter features non-contact level sensing from 0.5 to 14 ft. with accuracy to +/- 0.25%. LN20 offers encrypted digital communication, field replaceable lithium-ion battery,...
Read More »
Level Switch uses tuning fork sensor.
LZ10 Tuning Fork Level Switch vibrates at nominal frequency of 400 Hz. As switch becomes immersed in liquid or slurry, corresponding frequency shift occurs. When measured frequency shift reaches setpoint value, switch changes state indicating presence of liquid or solid medium. It is suitable for liquid applications with light to medium coating or scaling-type characteristics, or lightweight...
Read More »