Elma Bustronic Corp.
Fremont, CA 94538
Share:
Backplane implements VXS processor mesh.
Developed to enable switch/processor mesh technology for applications that require multiple boards, 12-slot Hybrid Backplane implements 2 VME64x slots, 3 VME64x/VXS payload slots, and 6 VXS switch slots. Each switch slot implements 20 x 4 links for total of 25 GB/s per switch slot. System architecture supports up to 7.5 GB/s of throughput between I/O front end and processing mesh, and total of...
Read More »Enclosures suit AdvancedTCA blade and server applications.
Optima AT Series of vertical rack enclosures measure 44U high x 600 mm wide x 600 mm deep for mounting up to three 14U ATCA chassis. Cabinets feature integrated air baffling to ensure cooling path integrity, 4 high volume CFM fans, and top cabinet exhaust. Cable management is configurable for horizontal and vertical chassis mounting, and cabinet door is gasketed for environmental sealing. Modular...
Read More »Extender Boards use rigid-flex-rigid PCB design.
VXS Extender Boards utilize right angle pin connector that plugs into backplane, connected to flex circuit that wires to straight receptacle to receive plug-in board. Units bring circuit card completely out of card cage or enclosure so that it can be tested and debugged. There are test points for all differential pairs on MultiGig fabric connector for hub slots. Boards come in 10-layer stripline...
Read More »ATCA Extender Board facilitates prototyping process.
AdvancedTCA (ATCA) test extender board, which features metal frame with latching handles, brings circuit card completely out of card cage or enclosure for testing/debugging. Providing access to both sides of board under test, product extends power and IPMB signals. It has 10-layer stripline design and is designed for full populated fabric slot and power connector J10. Zone 3 section has flexible...
Read More »Backplane utilizes CompactPCI Express architecture.
Based on PICMG specification, EXP0 four-slot CompactPCI Express backplane contains system slot, one Type 1 slot, and 2 Type 2 slots. Backplane, featuring 10-layer stripline design and user available backplane I/O of P3, P4, and P5 connectors. CompactPCI Express supports Intel PCI Express architecture in 6U-160 Eurocard form factor. It connects cards via serial point-to-point bus with read-only...
Read More »Backplane provides 20 slots.
Featuring 2 hub slots and 18 payload slots, 7U Dual Star VXS VME Switched Serial Backplane is designed with low-dielectric Nelco PCB material and comes in 18-layer controlled-impedance stripline design. Unit is fully backwards-compatible to VME/VME64x. It utilizes 6.4 Gbps connector across P0 section of VME64X backplane, allowing use of switched fabric signals. Height of backplane allows room for...
Read More »
CompactPCI Backplane features power studs between slots.
Measuring 5.067 x 2.360 in., 32-bit 3U CompactPCI Backplane features 3 slots and 8 layers, and is compliant to PICMG specifications. It utilizes controlled-impedance stripline design for virtually zero crosstalk.
Read More »
CompactPCI Backplanes are designed to facilitate wiring.
EasyCable backplanes come in 3U and 6U cPCI and 6U H.110 for computer telephony versions in various slot sizes. Power nuts are provided along side for +5 V, +3.3 V, V I/O, and GND, location and grouping of which save cable assembly time. Faston blades are provided for plugging +12 and -12 V, and 6U versions have ATX connector for direct plugging. All backplanes incorporate computer-simulated...
Read More »
CompactPCI Backplanes allow extra room in chassis.
Low Profile cPCI backplanes save slot-size of width by placing power studs and power blades between slots and throughout key locations on backplane. Three slot 3U and 6U models are available as well as PICMG 2.16 configurations. Incorporating computer-simulated stripline design, all backplanes are compliant to PICMG basic specification 2.0 R3.0 and Hot Swap specification 2.1 R1.0. With optimal...
Read More »
Switchless VXS Backplane is suited for early development.
Compliant to VITA 41.0 specification, 5-slot VXS Switched Serial Backplane allows direct connection of up to 3 node cards without requiring switch card to run fabric. Arrangement can be used to develop and test communication between end-point cards and allow demonstration of VXS node cards prior to availability of switch silicon. Compliant to VITA 38 specification for System Management, product...
Read More »