Mimot
Irvine, CA 92618
Share:
Placement System targets high-volume assembly market.
Featuring cascading modularity, Model MX offers placement rates up to 80,000 c/hr and provides 216 feeder slots per segment. It includes double placement areas in each module, with Multilevel Transport System for absolute line balancing and elimination of local head-downtimes.
Read More »
MIMOT's New 'Advantage X' Boosts Placement Rates
MIMOT's New 'Advantage X' Boosts Placement Rates Irvine, California, USA - MIMOT's new 'Advantage X' enhancement package boosts placement rates by 15%. The retrofittable Advantage X upgrade is suitable for all MIMOT pick and place machines; it combines both hardware and software advances. It is especially beneficial for MIMOT high-mix pick and place systems, bringing the c/h rate to 24,000 for...
Read More »In-Line Dispenser accommodates up to 6 dispense heads.
Based on positive displacement auger valve, Multi-Head Dispenser offers overall dispense capacity of 40,000 d/h. Ability to mount dispense needles with different diameters achieves variety of dot sizes; system chooses correct needle from information in component library. It uses program patterns from MIMOT placement system to create automatic dispense program and can dispense solder paste,...
Read More »
Modular T-Shaped Junction re-routes PCBs.
EasyTurn sends board, on command, in either of 2 different directions, depending on need. When integrated with AOI system, it can send defective PCBs to magazine loader or to rework station, while failure-free boards move directly to reflow oven. EasyTurn automatically adjusts to specific width of each incoming board to prevent dropping or damage. CAN-Bus controlled unit features full SMEMA...
Read More »
SMT Placement System runs multiple jobs without pause.
Advantage autoplacer, with 324-feeder capacity, is configured so that when first job is finished, feeders for second job are already waiting. System can place entire range of components, from 0201's up to 55 x 55 mm, with speeds up to 21,600 c/hr without need for fine pitch placer or chip shooter. It has modular design that incorporates integration software package.
Read More »
Software brings traceability to pick and place operations.
MIMTRACE software module helps electronics manufacturers meet traceability requirements by tracing all details of placement process, including job, lot, panel, board, and placed component. There are 24 data levels stored for each component placed, and search functions helps track each data level whenever necessary. Complete module incorporates elements of MIMRUEST, MIMJOB, and MIMTRACE, which...
Read More »
Full Active Feeder features quick change racks.
Full Active Feeder combines Triligent feeder technology with exchangeable feeder banks in high-mix assembly environments. Feeder exchange time is reduced through active, high-speed optical communication between system, intelligent feeders, and operator. Quick Change Racks can handle groups of Triligent Feeders for quick exchange. Operator can use single active feeders or exchange racks with...
Read More »
Feeder System suits pick-and-place process.
Triligent Triple Intelligence Feeders, available in tape and stick configurations, maintain uninterrupted high-speed communication with pick-and-place machine. Multiple-LED status indicator and operator signaling display are provided on each unit. Data transmission between Feeder and pick and place system is accomplished via optical interface. Closed-loop servo tape-advance mechanism can be...
Read More »
Dip-Flux Feeder facilitates flip chip assembly.
Dip-Flux Feeder picks up component from waffle tray, stick feeder, or tape feeder, then dips component, leads, or BGA balls into rotating flux bath. It then places component or flip chip onto board or substrate. Fixed squeegee in rotating flux bath ensures constant flux wave height. Laser sensors detect approaching components and halt squeegee rotation for duration of dipping process. Feeder is...
Read More »
Placement System targets high-volume assembly market.
Featuring cascading modularity, Model MX offers placement rates up to 80,000 c/hr and provides 216 feeder slots per segment. It includes double placement areas in each module, with Multilevel Transport System for absolute line balancing and elimination of local head-downtimes.
Read More »
MIMOT's New 'Advantage X' Boosts Placement Rates
MIMOT's New 'Advantage X' Boosts Placement Rates Irvine, California, USA - MIMOT's new 'Advantage X' enhancement package boosts placement rates by 15%. The retrofittable Advantage X upgrade is suitable for all MIMOT pick and place machines; it combines both hardware and software advances. It is especially beneficial for MIMOT high-mix pick and place systems, bringing the c/h rate to 24,000 for...
Read More »In-Line Dispenser accommodates up to 6 dispense heads.
Based on positive displacement auger valve, Multi-Head Dispenser offers overall dispense capacity of 40,000 d/h. Ability to mount dispense needles with different diameters achieves variety of dot sizes; system chooses correct needle from information in component library. It uses program patterns from MIMOT placement system to create automatic dispense program and can dispense solder paste,...
Read More »
Modular T-Shaped Junction re-routes PCBs.
EasyTurn sends board, on command, in either of 2 different directions, depending on need. When integrated with AOI system, it can send defective PCBs to magazine loader or to rework station, while failure-free boards move directly to reflow oven. EasyTurn automatically adjusts to specific width of each incoming board to prevent dropping or damage. CAN-Bus controlled unit features full SMEMA...
Read More »
SMT Placement System runs multiple jobs without pause.
Advantage autoplacer, with 324-feeder capacity, is configured so that when first job is finished, feeders for second job are already waiting. System can place entire range of components, from 0201's up to 55 x 55 mm, with speeds up to 21,600 c/hr without need for fine pitch placer or chip shooter. It has modular design that incorporates integration software package.
Read More »
Software brings traceability to pick and place operations.
MIMTRACE software module helps electronics manufacturers meet traceability requirements by tracing all details of placement process, including job, lot, panel, board, and placed component. There are 24 data levels stored for each component placed, and search functions helps track each data level whenever necessary. Complete module incorporates elements of MIMRUEST, MIMJOB, and MIMTRACE, which...
Read More »
Full Active Feeder features quick change racks.
Full Active Feeder combines Triligent feeder technology with exchangeable feeder banks in high-mix assembly environments. Feeder exchange time is reduced through active, high-speed optical communication between system, intelligent feeders, and operator. Quick Change Racks can handle groups of Triligent Feeders for quick exchange. Operator can use single active feeders or exchange racks with...
Read More »
Feeder System suits pick-and-place process.
Triligent Triple Intelligence Feeders, available in tape and stick configurations, maintain uninterrupted high-speed communication with pick-and-place machine. Multiple-LED status indicator and operator signaling display are provided on each unit. Data transmission between Feeder and pick and place system is accomplished via optical interface. Closed-loop servo tape-advance mechanism can be...
Read More »
Dip-Flux Feeder facilitates flip chip assembly.
Dip-Flux Feeder picks up component from waffle tray, stick feeder, or tape feeder, then dips component, leads, or BGA balls into rotating flux bath. It then places component or flip chip onto board or substrate. Fixed squeegee in rotating flux bath ensures constant flux wave height. Laser sensors detect approaching components and halt squeegee rotation for duration of dipping process. Feeder is...
Read More »