Hitachi Power Tools (Koki)

Agricultural & Farming Products

Cordless Driver Drills withstand demanding projects.

Rated 18 V, Model DS18DMR delivers 550 lb-in. torque and comes with two 3.0 Ah batteries. Using two 2.0 Ah batteries, 14 V Model DS14DMR produces 450 lb-in. torque. Both feature 2-speed transmissions with no-load rpms of 0-400/1,600. Drills include rare earth magnet motors, replaceable armatures, externally accessible carbon brushes, industrial-grade Rohm chucks, 22-stage ratcheting slip-clutch,...

Read More »
Agricultural & Farming Products

Hammer Drills are cordless and keyless.

Cordless 14V Model DV14DV and 18V Model DV18DV 1/2 in. hammer drills have impact rates of 0 to 18,000 beats/min (BPM) and 0 to 22,500 BPM, with torque of 346 and 400 lb-in., respectively. With turn of selection dial on head of drill, tools can switch from serving as driver drill to hammer drill. Both have one-touch speed shift knob, adjustable slip-clutch with 22 stages, fan-cooled motors, and...

Read More »
Portable Tools

Impact Tools run off battery power.

DM series cordless impact tools include WH9DM and WH12DM impact drivers and WR9DM and WR12DM impact wrenches. Impact drivers can perform all functions of screwdriver and, by attaching different bits, can drill or tighten and loosen nuts and bolts. Impact wrenches also tighten and loosen nuts and bolts. Both are available in 9.6 and 12 V models, with 800 and 1330 in. lb torque, respectively....

Read More »
Construction Equipment and Supplies

Portable Rebar Tool combines bending and cutting functions.

Model VB16Y cuts and bends concrete reinforcing rod during construction of foundations and structures. It bends up to No. 5 Grade 60 rebar at max angle of 180 deg. Tool works with 3/8, 1/2, and 5/8 in. dia rebar. Operator has complete control over velocity and angle at which rebar is bent. Reference markings on bending plate provide for easy position adjustment, and dial lets operator make cuts...

Read More »
Machinery & Machining Tools

Miter Saw features 12 in. blade.

C12FSA Sliding Dual Bevel Compound Miter Saw operates on 12 Amp motor that gradually progresses to maximum RPM level, preventing upward jerk due to torque when started. Constant blade speed delivers clean cut, due to electronic feedback control feature in motor. Overload protection safety device shuts itself down if it begins to draw too much power. Safety chip deflector prevents wood chips from...

Read More »
Portable Tools

Cordless Kit contains collection of tools.

KC18DB 18 V cordless combo kit includes 18 volt 1/2 in. cordless driver drill with variable 2 speed transmission, circular saw, cordless torchlight, 2 rechargeable nickel cadmium batteries, and battery charger, all custom bundled in specially designed case. Drill and circular saw are powered by interchangeable high capacity nickel-cadmium batteries. Electronic feedback power control increases...

Read More »
Agricultural & Farming Products

Hammer Drill has drill chuck capacity of 1/2 in.

Model FDV16VB Hammer Drill's low noise cooling air-flow design ensures protection against overheating. It contains ball and needle bearings, and is double insulated. FDV16VB's 5 AMP power-plus motor delivers no-load speeds of 0-2900 RPM with 550 W input. Other features include pistol type handle, keyless chuck, pressure sensitive trigger, and variable speed preset dial. Impact drill or drill only...

Read More »
Machinery & Machining Tools

Power Tool Kit includes 2 saws.

KC24DC power tool kit includes 24V CR24DV reciprocating saw, C7D circular saw, 2 rechargeable batteries, and UC24YFB battery charger. CR24DV reciprocating saw features no-load speeds up to 2,600 SPM, stroke length of 1-1/8 in., carbon-tip blades, and tool-less blade retainer. C7D circular saw has no-load speeds of 3000 RPM, blade diameter of 7-1/4 in., fan cooled motor, built in spotlight, and...

Read More »
Packaging Products & Equipment

Stapler operates at 12.7 staples per second.

Pneumatically operated N5008AC Standard Crown Stapler features cylinder valve firing mechanism and aluminum magazine. Nail-driving depth can be adjusted for counter-sinking or flush-driving. Handle is equipped with durable rubber grip for comfortable use. N5008AC uses 16 gauge, 7/16 in. crown staples that are 1 to 2 in. in length, and features maximum staple capacity of 160. Operating pressure is...

Read More »
Construction Equipment and Supplies

Framing Nailer handles lengths from 2-3/8 to 3-1/2 in.

Model NR90AC2 Full Head Framing Nailer has 1-piece solid extruded aluminum magazine, die-cast aluminum body, and air inlet dust filter. It operates at pressures of 70 to 100 psi, and is capable of driving up to 3 round head nails per second. Features include aggressive nail push lever, idling protector, depth-of-drive adjustment dial, and 360° exhaust. It can handle 50 to 60 nails (2...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers