Valcor Engineering Corporation
Springfield, NJ 07081
Failsafe Brake fits stepper and servo motors.
Model RFEB power-off brake mounts on front end of standard NEMA 23 and NEMA 34 stepper or servo motors to prevent machine from operating or for holding load in place when power fails. It has spring-set design, ball bearing supported output shaft, and operates at speeds to 8,000 rpm. Brake is available in 24 and 90 Vdc versions. Applications include factory automation, material handling, robotics,...
Read More »
Failsafe Brake fits stepper and servo motors.
Model RFEB power-off brake mounts on front end of standard NEMA 23 and NEMA 34 stepper or servo motors to prevent machine from operating or for holding load in place when power fails. It has spring-set design, ball bearing supported output shaft, and operates at speeds to 8,000 rpm. Brake is available in 24 and 90 Vdc versions. Applications include factory automation, material handling, robotics,...
Read More »
Brake is designed for demanding applications.
XTREME TORQUE Model XT-58B is 16.3 in. high and 2.44 in. in diameter with holding torque of 60 in.lbs. XT Series clutches and brakes consistently offer coefficients of friction between 0.75 and 0.95. Applications include robotics, computer chip and clean room handling equipment, automation machinery, and material handling equipment.
Read More »
Brake is designed for demanding applications.
XTREME TORQUE Model XT-58B is 16.3 in. high and 2.44 in. in diameter with holding torque of 60 in.lbs. XT Series clutches and brakes consistently offer coefficients of friction between 0.75 and 0.95. Applications include robotics, computer chip and clean room handling equipment, automation machinery, and material handling equipment.
Read More »
Tiny Pumps dispense small amounts.
SV700 Series of inert, solenoid-operated micro pumps are suitable for dispensing re-agents, dilutants and lubricants. Pumps are less than 3 in. high, have diameter of 1.10 in., and dispense volume of 50-250 -µL. Available with glass-filled polypropylene pump head and EPDM or viton elastomers, pumps are compatibile with wide range of fluids. Fluid connections include 1/4-28 flat bottom ports,...
Read More »
Tiny Pumps dispense small amounts.
SV700 Series of inert, solenoid-operated micro pumps are suitable for dispensing re-agents, dilutants and lubricants. Pumps are less than 3 in. high, have diameter of 1.10 in., and dispense volume of 50-250 Ã-µL. Available with glass-filled polypropylene pump head and EPDM or viton elastomers, pumps are compatibile with wide range of fluids. Fluid connections include 1/4-28 flat bottom ports,...
Read More »
2-Way Poppet Valves feature bubble tight shut-off.
SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115...
Read More »
2-Way Poppet Valves feature bubble tight shut-off.
SV72 Series 2-way inert balanced-poppet solenoid valves are designed to control corrosive fluids by isolating metal components from operating media. They employ two rolling diaphragms that act as isolating barriers and balancing areas. SV72 valves feature bubble tight shut-off and are mountable in any position. They offer pressure ratings of 100 psi with a Cv of 4.0. Valves are available with 115...
Read More »
Poppet Valves suit chemical dispensing applications.
SV72 Series 2-Way Inert Balanced-Poppet Solenoid Valves are designed to control corrosive fluids by isolating metal components from operating media. They employ 2 rolling diaphragms, which act as isolating barriers and balancing areas. Units offer pressure ratings of 100 PSIG with Cv of 4.0. SV72 valves, available with 115VAC, or 12 and 24 VDC coils, also feature inert construction, high flow and...
Read More »
Poppet Valves suit chemical dispensing applications.
SV72 Series 2-Way Inert Balanced-Poppet Solenoid Valves are designed to control corrosive fluids by isolating metal components from operating media. They employ 2 rolling diaphragms, which act as isolating barriers and balancing areas. Units offer pressure ratings of 100 PSIG with Cv of 4.0. SV72 valves, available with 115VAC, or 12 and 24 VDC coils, also feature inert construction, high flow and...
Read More »