Murata Electronics North America, Inc.
Smyrna, GA 30080
New 600W Digital Quarter-brick DC-DC Converters Feature 2250 VDC I/O Isolation, with a Functional Insulation System
Designed for DSQ, DCQ and DAQ converters support the full ‘TNV’ input range of 36 – 75V, with a typical efficiency of 96%. DOSA compliant converters designed to support droop mode current sharing of multiple modules for increased power output with tight load sharing. Application include telecommunications networking equipment, computing equipment, wireless base stations, PoE systems,...
Read More »
End-to-End European-Compliant IoT Solutions from Murata in Partnership with eSoftThings
Hoofddorp, Netherlands: With the ongoing rise in demand for secure end-to-end IoT solutions designed for the European market and compliant with European regulations, Murata and eSoftThings have collaborated to deliver high-quality hardware and platform solutions. These new solutions couple Murata’s advanced communications modules and sensor technologies with the eSoftLink IoT platform (which...
Read More »Murata, Cypress and NXP Collaborate on Multi-Platform Wi-Fi® IoT Solutions
Developers can Mix-and-Match Murata Modules Based on Cypress Wi-Fi® with NXP i.MX Processors for Optimized Connected Platforms for Faster Time-to-Market Hoofddorp, Netherlands: Murata today announced that it is collaborating with Cypress Semiconductor Corp. and NXP Semiconductors N.V. to provide IoT developers with mix-and-match wireless connectivity and processing solutions that shorten the...
Read More »
Murata Launches LBAD0ZZ1RX NBIoT Cellular Wireless Module with an Arm Cortex M0 Processing Core
The LBAD0ZZ1RX NBIoT Cellular Wireless Module is designed for battery powered IoT/IIoT applications. The module is offered with HiSilicon Hi2115 single-die wireless SoC device, a DC/DC converter, a power management IC and wireless front end matching components. It comes with UART, I²C and SPI along with GPIO and an ADC interfaces. The unit’s processing core is equipped with 64 kBytes of SRAM...
Read More »Murata Launches Compact and Integrated LBAA0ZZ1QM (US) and LBAA0ZZ1TY (EU) Modules
Murata has introduced their Integrated LBAA0ZZ1QM (US) and LBAA0ZZ1TY (EU) LoRa Pico Gateway 14-pin metal-shielded module. They support eight channels in two variants in either EU or US ISM bands. The compact modules measure just 55.0 mm x 21.0 mm x 3.4 mm. They comprise of a Semtech SX1308 transceiver concentrator capable of managing packets from many remotely dispersed end-points, two Semtech...
Read More »
Murata Introduces WMRAG Series MEMS Resonator with Stable Frequency Characteristics
The WMRAG Series 32.768 kHz MEMS Resonator is designed for use in IoT and wearable applications. The resonator features an in-built 6.9 pf capacitor. The device can be operated in -30 to 85°C temperature range with temperature drift of
Read More »
New DCM20 Series Panel Meters Come with Contactless Touch-Sensor Function Selector Switch
Murata’s DCM20 Series DC Panel Meters are designed for use in 12V, 24V or 48V systems. Units provide ±1% (voltage) and ±2% (current) accuracy. Meters are offered in one-piece polycarbonate housing that fits 0U and 1U rack and feature internal self-resetting fuse. Units offer input voltage ranging from 0.5 to 72 VDC with resolution of 10 mV and are suitable for laboratory instrumentation,...
Read More »
Murata's DC-DC Converters Feature 2250 Vdc Input-to-Output Isolation
Murata’s 1/16 Brick Encapsulated DC-DC Converters are suitable for lighting, motor drives, control modules, security systems, signs and computing applications. Units come with on/off logic control, output short circuit and over voltage protection. These converters are available with output of 3.3, 5 and 12 Vdc with up to 50 W of output power. Murata’s converters feature encapsulated...
Read More »
NXF1 Series 1W DC-DC Converters feature embedded core SMD construction.
NXF1 Series DC-DC Converters offers an input range of ±5 % around the nominals of 3.3 V and 5 V with output regulation of less than 0.5%. Units are suitable for transportation, telecom/wireless equipment, medical and alternative energy/solar power applications. These converters are tested to 3 kVDC and meets ANSI/AAMI ES60601-1 standards. NXF1 Series units come short-circuit protection with auto...
Read More »
PJFV Series Vibration Solutions consume 2mA rms of current.
Providing vibration notifications and announcements to wearable devices, PJFV Series Vibration Solutions is housed in flat package with 10.5mm × 3.8mm × 2mm dimensions. Using piezoelectric ceramics, unit comes with rated working voltage of 3V.
Read More »