Meggitt Sensing Systems

Triaxial IEPE Accelerometer features ultra-miniature design.
Sensors, Monitors & Transducers

Triaxial IEPE Accelerometer features ultra-miniature design.

Supplied in anodized aluminum housing that provides case isolation from mounting surface, Endevco® 35B combines 3 transducers with integrated electronics into 0.235 in. cube. Adhesively mounted accelerometer offers sensitivities of 2.5, 5, or 10 mV/g. Featuring 36 in. integral cable that terminates to single 4-pin connector, device is suited for testing consumer electronics, computer...

Read More »
Handheld Shaker provides multiple frequency outputs.
Electronic Components & Devices

Handheld Shaker provides multiple frequency outputs.

With self-diagnostics to ensure data integrity, ReferenceMate™ delivers known vibration level that enables users in field to verify sensor performance and integrity of cabling and connectors between sensor and DAQ system. Portable vibration reference source provides frequency outputs of 61.4 Hz for imperial measurements, 100 Hz to simulate standard calibration conditions, and 159.2 Hz for...

Read More »
High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.
Sensors, Monitors & Transducers

High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.

With 10 mV/g sensitivity, single-axis 27BLPF operates reliably up to +347°F and comes in teardrop-shaped, hermetically sealed, titanium housing that has side-exit M3 connector. Standard options include 27BLPF-10-02 and 27BLPF-10-10, which offer respective corner frequencies of 2 and 10 kHz. Supplied with 10 ft mating cable, adhesive-mounted sensor has 0.25 in. dia and weighs 0.8 g....

Read More »
General-Purpose Accelerometer features modular mounting system.
Sensors, Monitors & Transducers

General-Purpose Accelerometer features modular mounting system.

Threaded model 46A, available inÂ- 5 sensitivities from 10–1,000 mV/g, can be fitted into various mounting blocks (pods) with stud or adhesive mount. While hex and cube pods mount single-axis measurements, tri-hex pod, with slots for 3 sensors, let technicians test up to 3 sensitivities concurrently. For multi-axis testing, triaxial pod enables different sensitivities to be tested on...

Read More »
Communication Systems & Equipment

Vibration Sensors are designed for high-temperature operation.

Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating,...

Read More »
Triaxial Accelerometer supports aerospace applications.
Sensors, Monitors & Transducers

Triaxial Accelerometer supports aerospace applications.

Providing measurement of shock and vibration simultaneously in 3 mutually perpendicular axes, Model 7253D is available in sensitivities of 10 or 100 V/g. Each axis utilizes type P-8 shear piezoelectric sensing element in conjunction with hybrid charge amplifier to provide low-impedance output of ±5 V full scale in 2-wire IEPE system configuration. Measuring 0.70 x 0.70 x 0.375 in., unit...

Read More »
Communication Systems & Equipment

Meggitt Sensing Systems to Exhibit Endevco Line of Sensors at Upcoming NI Week Conference in Austin

Irvine, Calif., USAÂ- – Meggitt Sensing Systems, a Meggitt company and leader in sensing and monitoring systems for extreme environments, will be highlighting its Endevco line of sensors at the upcoming NI Week Conference Aug. 5-8, 2013, at the Austin (Texas) Convention Center. The Meggitt Sensing Systems display, at exhibit booth #436, will showcase a wide range of Endevco general purpose...

Read More »
Rugged Piezoelectric Accelerometer operates in high temperatures.
Controls & Controllers

Rugged Piezoelectric Accelerometer operates in high temperatures.

Endevco® model 6233C piezoelectric charge output accelerometer is designed for continuous operation up to 900°F and requires no external power source. Available in standard ranges of 10, 50, and 100 pC/g, unit also offers balanced differential output. Product features 3-point ARINC mounting and rugged 2-pin 7/16-27 UNS 2A threaded receptacle, and provides vibration monitoring of jet...

Read More »
Piezoelectric Accelerometer features 2.8 pC/g sensitivity.
Sensors, Monitors & Transducers

Piezoelectric Accelerometer features 2.8 pC/g sensitivity.

Designed to operate over temperature range of -55 to +177°C, Endevco® Model 2228C provides vibration measurements on 3 orthogonal axes with 10-32 receptacles to allow data collection from 3 separate output connections. Self-generating device requires no external power source for operation. Weighing just 15 g, triaxial accelerometer minimizes mass loading on small structures and...

Read More »
Free-Field Microphone, Preamplifier offer TEDS capabilities.
Communication Systems & Equipment

Free-Field Microphone, Preamplifier offer TEDS capabilities.

As combined Â-½ in. free-field pressure microphone and iTEDS enabled preamplifier (per IEEE 1451.4) set, Endevco® model EM46AE is designed for general-purpose and larger channel count precision acoustic measurements. Condenser microphone and preamplifier are both constructed of stainless steel and calibrated together. With frequency response from 3.15 Hz to 20 kHz and dynamic range of...

Read More »
Triaxial IEPE Accelerometer features ultra-miniature design.
Sensors, Monitors & Transducers

Triaxial IEPE Accelerometer features ultra-miniature design.

Supplied in anodized aluminum housing that provides case isolation from mounting surface, Endevco® 35B combines 3 transducers with integrated electronics into 0.235 in. cube. Adhesively mounted accelerometer offers sensitivities of 2.5, 5, or 10 mV/g. Featuring 36 in. integral cable that terminates to single 4-pin connector, device is suited for testing consumer electronics, computer...

Read More »
Handheld Shaker provides multiple frequency outputs.
Electronic Components & Devices

Handheld Shaker provides multiple frequency outputs.

With self-diagnostics to ensure data integrity, ReferenceMate™ delivers known vibration level that enables users in field to verify sensor performance and integrity of cabling and connectors between sensor and DAQ system. Portable vibration reference source provides frequency outputs of 61.4 Hz for imperial measurements, 100 Hz to simulate standard calibration conditions, and 159.2 Hz for...

Read More »
High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.
Sensors, Monitors & Transducers

High-Temp IEPE Accelerometer integrates 2-pole, low-pass filter.

With 10 mV/g sensitivity, single-axis 27BLPF operates reliably up to +347°F and comes in teardrop-shaped, hermetically sealed, titanium housing that has side-exit M3 connector. Standard options include 27BLPF-10-02 and 27BLPF-10-10, which offer respective corner frequencies of 2 and 10 kHz. Supplied with 10 ft mating cable, adhesive-mounted sensor has 0.25 in. dia and weighs 0.8 g....

Read More »
General-Purpose Accelerometer features modular mounting system.
Sensors, Monitors & Transducers

General-Purpose Accelerometer features modular mounting system.

Threaded model 46A, available inÂ- 5 sensitivities from 10–1,000 mV/g, can be fitted into various mounting blocks (pods) with stud or adhesive mount. While hex and cube pods mount single-axis measurements, tri-hex pod, with slots for 3 sensors, let technicians test up to 3 sensitivities concurrently. For multi-axis testing, triaxial pod enables different sensitivities to be tested on...

Read More »
Communication Systems & Equipment

Vibration Sensors are designed for high-temperature operation.

Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating,...

Read More »
Triaxial Accelerometer supports aerospace applications.
Sensors, Monitors & Transducers

Triaxial Accelerometer supports aerospace applications.

Providing measurement of shock and vibration simultaneously in 3 mutually perpendicular axes, Model 7253D is available in sensitivities of 10 or 100 V/g. Each axis utilizes type P-8 shear piezoelectric sensing element in conjunction with hybrid charge amplifier to provide low-impedance output of ±5 V full scale in 2-wire IEPE system configuration. Measuring 0.70 x 0.70 x 0.375 in., unit...

Read More »
Communication Systems & Equipment

Meggitt Sensing Systems to Exhibit Endevco Line of Sensors at Upcoming NI Week Conference in Austin

Irvine, Calif., USAÂ- – Meggitt Sensing Systems, a Meggitt company and leader in sensing and monitoring systems for extreme environments, will be highlighting its Endevco line of sensors at the upcoming NI Week Conference Aug. 5-8, 2013, at the Austin (Texas) Convention Center. The Meggitt Sensing Systems display, at exhibit booth #436, will showcase a wide range of Endevco general purpose...

Read More »
Company News

New Colombian Reseller for Meggitt's Wilcoxon Research Product Line

Germantown, MD - Meggitt, a leading supplier of quality accelerometers and vibration sensors, has bolstered sales channels in South America with the addition of a new partner, GPI International, Inc. GPI International is now an authorized reseller of the Wilcoxon Research product line in Colombia. GPI International has been in business for 15 years serving the Colombia power generation market and...

Read More »
Rugged Piezoelectric Accelerometer operates in high temperatures.
Controls & Controllers

Rugged Piezoelectric Accelerometer operates in high temperatures.

Endevco® model 6233C piezoelectric charge output accelerometer is designed for continuous operation up to 900°F and requires no external power source. Available in standard ranges of 10, 50, and 100 pC/g, unit also offers balanced differential output. Product features 3-point ARINC mounting and rugged 2-pin 7/16-27 UNS 2A threaded receptacle, and provides vibration monitoring of jet...

Read More »
Company News

Meggitt Sensing Systems Introduces "Endevco® Acoustic Measurement Products Selection Guide"

January 24, 2011, San Juan Capistrano, California, USA - Meggitt Sensing Systems, a Meggitt group division, has announced the global release of its new Endevco® Acoustic Measurement Products Selection Guide", a single comprehensive product specification resource, detailing Meggitt's complete range of Endevco® acoustic sensors and instrumentation for automotive NVH, cabin noise,...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers