Novacel
DEVILLE LES ROUEN 76250 FRA
Share:
Nd:YAG Laser trims, repairs and cuts.
Compact diode-pumped Jasper(TM) is suitable for microelectronics trimming and repair, shorting-bar cutting, and LCD panel repair. It has repetition rates from 100 Hz to 10 KHz with output power greater than 2.5W at 10 KHz. Laser can be triggered directly from control panel or from remote source through rear-panel BNC. Most laser functions can also be controlled from PC via RS-232 port. Q-switched...
Read More »
Porometer tests filter materials.
On-Line Multi-Chamber Porometer performs tests on filter media without need to cut out sample. It can determine bubble point, mean flow pore size, pore distribution and gas permeability, including Gurley and Frazier permeability. Filtration medium simply slides through sample chamber. Tests can be performed in less than 10 min on production floor, and tested material is not damaged in any way....
Read More »
3D Scanner has measurement rates to 30,000 Hz.
LPM Series scanners provide flexibility for 3D measurement, inspection, and modeling. Options include hemispheric scanning, automated or manual operation, reflectorless ranges to 2500 m, accuracy in millimeters, and 3D data acquisition software package. Operable from laptop PC, Laser Profile Measuring System incorporates various laser distance LD90-VHS series distance meters, pan and tilt mount...
Read More »
Refrigerated Dryers are enviromentally friendly.
Refrigerated Dryers, with capacities from 1000 to 3000 scfm, have working pressures of 200 psig (max). Smooth surface, tube-in-tube, copper heat exchangers resist fouling, and provide heat transfer. All units use R-404a refrigerant, and contain no CFC's. Filtered separator equipped with Filter Monitor is standard on all models. Units also include Demand Manager(TM) microprocessor control system,...
Read More »
Motors are inverter-ready.
Severe Duty motors are available in ratings from 1/2 to 500. Constructed of iron, they are built with Class F insulation, Class B temperature rise, and 1.15 service factor. Motors through 575 V use ISR(TM) Inverter Spike Resistant wire. Processing motors provide corrosion resistant epoxy finish, regreasable ball bearings, oversized rotatable cast iron conduit boxes, and stainless steel nameplate....
Read More »
3-D Scanner runs on Windows NT4.0, 2000, and 98.
LMS-Z210 3-D laser-imaging scanner maps targets at distances up to 450 m. It offers True Color Channel for texturing of 3D Models. In 30 seconds, up to 240,000 points can be mapped, generating nearly 10,000 measurements per second. Scanning Field of View is 300 deg by 80 deg. Information, processed through 8-bit parallel data output, is connected directly to ECP compatible LDP printer port....
Read More »
Solenoid Valves operate from vacuum to 3,000 psig.
Atkomatic full-ported solenoid valves are available in 2-way, 2-position, normally closed and normally open; direct lift; semi-direct lift; and pilot piston operated. They are offered in 1/8 to 3 in. with connections for gases and liquids up to viscosity of 200 SUS. Ac and dc voltages are available, and most units come with Class H coils. Applications include chemical control, steam control, CO2...
Read More »
Turning Center has 60 degree slant bed.
Storm II 90 turning center is thermally and dynamically insulated, and includes Fanuc CNC control, digital spindle and axis drives. 12-position turret with VDI 30 tooling is standard, plus spindle can be ordered with 4000 or 6000 rpm. Machine includes fittings for chuck sizes up to 8 in. Optional barfeed system is operated and controlled directly from Fanuc control.
Read More »
Carousel/Picking Lifts are available with cantilever platforms.
Six models of carousel or order picking lifts are available which raise and lower operators to facilitate order picking from rack or carousel systems. They offer lowered heights of 8 and 10 in., travels of 60 and 72 in. and capacity of 2000 lbs. Lift speed is 15 sec with remote 5 HP electric hydraulic power unit. Basic platform sizes range from 4 x 9 ft up to 8 x 14 ft.
Read More »
Multiplexer Modules offer RF switching to 2GHz and 3.5GHz.
Model 7711 and 7712 RF Switch Modules are designed for Model 2700 and 2750 Multimeter/Switch Systems. Both offer 50 Ohm, dual 1x4 multiplexer configuration with rear panel SMA connectors. Modules allow flexible signal routing, with either local control through 27xx mainframe's front panel or remote PC control over GPIB or RS-232 interface. Maximum signal level is 30Vrms or 60VDC (30VDC for 7712),...
Read More »