FDT Group AISBL
Jodoigne BEL
Share:
Machining Center features 30,000 rpm spindle.
Incorporating 40 x 30 in. solid concrete-polymer machining table and 1.2 kW machining spindle with feed rates of up to 550 ipm, M85 is suited for milling, drilling, and engraving aluminum, plastics, stainless steel, brass, and exotic composites. Features include spray-mist coolant system, 10-station Automatic Tool Changer (ATC) with tool database and tool-length sensor, PC, flat-screen monitor,...
Read More »Magnetic Rotary Encoder IC comes in 4 x 4 mm QFN package.
Targeted for low-power battery operated applications, AS5055 performs all angle calculations as well as automatic power-up and power-down on-chip. It integrates 4 Hall sensor elements, one 12-bit angle encoder, smart power management controller, and 3- or 4-wire SPI communications interface. Low power device only draws current when new measurement is requested by host controller. Operating from...
Read More »
Mini Panel PC serves as open human machine interface.
Featuring front-side IP65-protected design, RISC-based Pico Client includes 5.7 in. VGA TFT touchscreen suited for visualization and control in machinery and equipment. Jazelle extension, integrated in 200 MHz/32-bit ARM9 processor, runs Java code directly on hardware, while 2 real-time 100 Mbit Ethernet interfaces enable both vertical and horizontal networking topologies. Measuring 212 x 156 mm...
Read More »
3D Optical Surface Profiler suits wide range of applications.
Based on white light interferometry (WLI) technology, ContourGT(TM) Surface Metrology Product Family addresses range of production QA/QC and R&D precision machining and manufacturing applications within high brightness LED, solar, ophthalmic, semiconductor, medical device, and academic research markets. High brightness dual-LED illumination facilitates precision, non-contact, 3D surface...
Read More »
Tube Bending Lubricant is offered in 5 and 55 gal containers.
Designed to stay where it is applied, Accu-Lube JL-12 opaque gel lubricant can be pumped or hand-applied directly to tube or bending mandrels, leaving clean coating on mandrel that will not build up over time. No cleaning is required before welding and lube can be easily cleaned before paint or plating.
Read More »UHF RFID Reader/Writer Module measures 23 x 13 x 2.8 mm.
Compact surface mount LXRW series RFID module is suited for stationary and handheld UHF Gen 2 RFID reader-writer units, including cell phones and other devices that require embedded RFID capabilities. Module includes processing unit, antenna matching circuit, power amplifier, random access memory, Gen 2 firmware, and oscillator. Offering 100 mW max output power for ranges up to 2 ft with small...
Read More »
Sifter Delumper handles up to 110,000 lb/hr.
Intended for food/pharmaceutical manufacturers, FlexSift S10 handles small batch operations, while FlexSift S30 is designed for larger batch/continuous flow operations. Units security screen, delump, and discharge, all without need for product feeder. Flush ground welds facilitate cleaning, while vibration-free design enables sifters to be coupled with most bulk bag unloaders and mixer...
Read More »UHF RFID Tag offers read range between 3-7 mm.
Available in 2 versions measuring 3.2 x 1.6 x 0.55 and 1.6 x 1.0 x 0.27 mm, MAGICSTRAPÃ-® LXMS series Gen 2 RFID tag can be readily integrated into any device with minimal detection. Information can be updated wirelessly using UHF reader-writer and can be password protected. Supplied on tape and reel for use with standard pick and place equipment, tag is resistant to extreme environmental...
Read More »
Needle Valve features all PTFE and PCTFE wetted parts.
Designed for laboratory and industrial applications, Model TNV is used to regulate corrosive gases and liquids for high-purity services. Media only comes in contact with PTFE and PCTFE, and valve spindles are made of rigid PCTFE to minimize creeping. Suited for use in pressure or non-critical vacuum applications, product can also be used as shut off valve. Temperature and pressure limits are...
Read More »Mechatronics Module enables development of custom actuators.
Featuring 3.3 V input voltage for battery-powered operation, M3 Micro-Mechatronic Module Design Platform yields complete closed-loop actuator on PCB measuring 12 x 30 mm or less. No external control board is necessary; serial commands drive on-board PID controller using standard I2C, SPI, or USART interface. Typical specifications for linear drive system based on M3 Design Platform include 0.5...
Read More »