Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Cleanroom Cabinet Oven operates at 500 -ºF.
No. 880 Class 100 cleanroom cabinet oven can be used to cure urethane, silicone and steel parts. It measures 36 x 36 x 51 in. and has Incoloy sheathed tubular elements that heat workspace, while 1500 cfm, 2 hp recirculating blower provides horizontal airflow across workload. Oven has 16 ga. Type 304 2B finish stainless steel interior with continuously backwelded seam construction. Exterior is...
Read More »
Oxygen Analyzer incorporates non-depleting sensor.
DF140 Oxygen Analyzer is available in ranges from 0-10 ppm to 0-25%. Sensor is fully calibrated to NIST standards, does not require frequent recalibrations, and never has to be rebuilt or replaced. Analyzer has optional NEMA 4X and NEMA 7 remote sensor enclosures for installation in Class 1, Div 1 and 2 areas. Accuracy is rated at Ã-
Read More »
Signal Beacons are free-standing.
Series 200 is available in 5 different colors and varying diameters and dome heights. Diameters range from 57mm to 152mm, and heights range from 66mm to 82mm. Units are available in permanent, blinking, flashing, LED or rotating versions and will allow for base, bracket or tube mounting options. Beacons feature IP 65 protection rating allowing use in unfavorable conditions.
Read More »
Speed Control monitors moving systems.
Speed Sentry control system monitors speed of conveyor systems, motors, process systems, or any moving target. It can take pulse input from any NPN or PNP type sensor, such as inductive proximity, optical detector, ultrasonic proximity, magnetic proximity, Hall effect, encoder, and mechanical switch contacts. It has auto learn mode so that no complicated calculations regarding rpm need to be...
Read More »
Digital Caliper handles tough environments.
Absolute Coolant-Proof Caliper works where dirt, grit, oil, heavy coolant spray, weather, or natural moisture pose hazards to electronic gages. It is available in 6 and 8 in. models. Both have sealed housings rated IP-65, .3 in. LCD readouts, and measuring ranges of 0-8 in. with resolution of 0.0005 in. and 0.002 in. accuracy. Absolute encoder allows gage to retain its origin point and other...
Read More »
Production Soldering Systems include mounting bracket.
ST 35 analog production soldering system and ST 55 fully programmable, digital system feature SensaTempÃ-® and PERMAGROUND(TM) technologies. SensaTemp maximizes heat delivery at low, safe temperatures, and eliminates calibration needs. Heavy-duty metal housings make these systems suitable for harsh production environments. Systems are available with either PS-70 soldering iron for micro...
Read More »
Converters can provide up to 25 VA.
High Power Digital to Synchro Converters feature 14, 12 or 10 bit resolution. They are designed to drive torque receivers with accuracies up to +/- 10 min of arc, while being immune to overload and transient conditions. Available output voltages are 90 or 11.8V RMS L-L, 60 or 400Hz. Units will accept 14-bit natural binary angle and convert it into 3-wire synchro or 4-wire resolver signals.
Read More »
Software provides remote programming capabilities.
Available in two versions, EView Windows 98 PC-based software is for use with BulkSonics Smart Transmitters equipped with HART communications output. EView works with 2 to 15 transmitters and is optional. EView-Light is for use with single transmitter. Both allow user to program and monitor Smart Transmitters from PC. EView using HART technology and HART modem digitally communicates between Smart...
Read More »
Caulk and Adhesive Gun is built on a T-handle platform.
Model 6560 cordless 12-volt gun pushes out high viscosity urethanes, caulks and adhesives. Microprocessor-controlled flow control switch provides precise beads, while drip protection feature briefly reverses motor when trigger is released to help keep work area clean. Trigger lock-off prevents tool from accidentally being turned on. Model 6560 is made of ZytelÃ-® nylon, and will not bend,...
Read More »
Prefabricated Buildings feature slab or raised installation.
Electro/Centers are pre-engineered power and industrial control buildings for utility and industrial needs. They contain electrical switchgear, motor control centers, breakers and communication systems. Buildings are constructed using welded I-beam base providing foundation for internally mounted components. Galvanized steel, stainless steel or aluminum construction is available. Units include...
Read More »