Aprima Medical Software, Inc
Carrollton, TX 75006
Share:
Fastening System retains 6000 points or 100 programs.
SCARA Fastening System is a screw assembly robot that employs ASG electric torque-control screwdrivers for repeatable fastener torque ranging from 4.0 oz-in. to 39.0 lbs-in. With no workpiece weight restrictions, SCARA robot is suitable for payloads of any weight. Repetitive position accuracy is +/-0.01 mm in Z axis, and +/-0.02 mm in X and Y axis. Set-up and training pendant uses plain English...
Read More »Receptacles are low maintenance.
Steel Designer Line(TM) is constructed from No. 304 stainless steel, and is available with satin stainless, satin brass, and mirror brass finishes. Eight models range in capacity from 5 to 15 gallons. All models comply with OSHA standards. Most models are UL Listed/FM Approved as fire-safe and self-extinguishing, and UL Classified as fire-safe.
Read More »Power Cords have GOST approval.
Continental European powercords have 4.8 mm diameter pins, are stocked in 2.5 mm lengths, and are available with 3 x 1.00 mmE+02 or 3 x 1.5 mmE+02 cable. Powercords are rated for service between 10 and 16 amps at 250 Vac (depending on cord used).
Read More »Connection Adapters are available with metric threads.
ADAFLANGE(TM) ADAPTER with face seal is supplied with thru-hole flange. This combination adapts flange port to threaded connection. Supplied with threaded type companion flange, ADAFLANGEPORT(TM) adapts threaded connection to flange connection. Both adapters can be supplied with either clamp or threaded type companion flanges. They are available with 370 Flare, SAE Straight, ORS O-Ring Face Seal,...
Read More »Flow Indicator uses microwave technology.
Solids Flow Indicator (SFI) detects flow in solid material applications including gravity chutes and pneumatic pipelines. SFI offers analog output and non-contact/non-intrusive design. Housing is rated for Class II dust-ignition proof environments, and meets NEMA 4 water-tight and dust-tight classifications. Other features include built-in averaging adjustment and LED indicators.
Read More »Position Transducer measures up to 4 in. of travel.
Model 174-0321T subminiature position transducer uses stainless steel cable wound around stainless steel drum. Bearing-mounted drum is mated to potentiometric element that translates linear position information to electrical signal. Transducer monitors cable acceleration in excess of 50 g's, and features 5K ohm co-molded conductive plastic potentiometric elements. It has operating temperature of...
Read More »Diode Laser suits direct-diode thermal applications.
500-micrometer broad-area emitter device is rated at 7 watts, CW. OEM single-stripe diode laser is mounted on 10.5 x 25 mm conduction-cooled package. Typical drive current and compliance voltage is less than 8 amperes and less than 2 volts, respectfully. Spectral width is less than 2.5 nm, FWHM, and beam divergence is less than 350 by 100, FWHM. Diode laser can act as pump source for...
Read More »Rotary Encoder suits tight constraint applications.
MOD 700 is comprised of LED and OptoASIC configured into small caliper, offering resolutions as high as 2,540 PPR. Opto-ASIC phased array photo diode IC features high tolerance for axial movement (+/- 0.010 in.) and power consumption of 40 mA. Standard stainless steel code disk offers range of standard optical radii, from .375 to .860 in. MOD 700 can be surface mounted onto PCBs or installed onto...
Read More »Weld Head offers scissors clamping mechanism.
Scissors-Lock Orbital Weld Head provides alignment for precision welding of tube up to 6 in. OD. It features heavy-duty construction, reliable arc starting, and efficient gas coverage for clean welds. Micro-weld heads down to 1/8 in. OD are also available.
Read More »CAD Translation Software is available with a license.
Acc-u-Trans(TM) CSI (Customer Site Installation) software makes native CAD translations between 4 major CAD systems: CATIA, Pro/ENGINEER, SDRC I-DEAS, and Unigraphics. License option gives companies choice of outsourcing translation needs by paying on service basis, licensing software outright for internal use, or combinations thereof. Software includes graphical user interface and on-line...
Read More »